CADANT-VIRTUAL-ROUTER-MIB
AI MIB Summary
The CADANT-VIRTUAL-ROUTER-MIB provides management interfaces for configuring and monitoring virtual router instances on Cadant networking hardware, specifically exposing parameters for IS-IS protocol integration such as the host name enablement status. This module enables administrators to track virtual router operational states and protocol-specific attributes within a multi-vendor or virtualized routing environment.
Remove cadVrGlobalIsisHostNameEnabled
Main OID:
cadVirtualRouterMibModule.1.3.6.1.4.1.4998.1.1.25.3
164
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
164 total| Object Name |
|---|
cadVirtualRouterMibModuleRemove cadVrGlobalIsisHostNameEnabled MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.25.3 |
cadVirtualRouter OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.3.1 |
cadVrNameTableThe inverse table of cadVrTable, such that a manager can create/lookup
a virtual router by its name instead of its index. To ensure consistency,
a row must be created in this table prior to the corresponding row being
created in the cadVrTable. When a row is created in this table, the SNMP
agent assigns it a cadVrNameVrIndex. That value can then be used as
cadVrIndex to create a row in the cadVrTable. Likewise, whenever a row
is deleted from this table, the SNMP agent also removes the corresponding
row from the cadVrTable. SEQUENCE OF CadVrNameEntry .1.3.6.1.4.1.4998.1.1.25.3.1.1 |
cadVrNameEntry CadVrNameEntry .1.3.6.1.4.1.4998.1.1.25.3.1.1.1 |
cadVrNameVrIndexThe cadVrIndex of the row in the cadVrTable which has the
same cadVrName.ro Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.1.1.1 |
cadVrNameRowStatusThe row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createAndGo,
and destroy. Other three states notInService, notReady and
createAndWait are not permitted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.1.1.2 |
cadVrTableThis entity's Virtual Routing table containing many
virtual routers. SEQUENCE OF CadVrEntry .1.3.6.1.4.1.4998.1.1.25.3.1.2 |
cadVrEntryA particular virtual router. Prior to creating a row in this
table, one must first create a row in the cadVrNameTable. The
value that is assigned to cadVrNameVrIndex can then be used as
cadVrIndex to create a row in this table. Otherwise, if one
attempts to create a row in this table with an unknown cadVrIndex,
the setRequest will fail. CadVrEntry .1.3.6.1.4.1.4998.1.1.25.3.1.2.1 |
cadVrIndexThe index value which identifies a virtual router. Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.1 |
cadVrNameThe name of the virtual router. This name must be unique among
all virtual routers. Whenever a row in this table is successfully
created, its name is copied from the cadVrNameTable. Note that a
row must be created in the cadVrNameTable prior to its corresponding
row being created in this table.ro DisplayString .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.2 |
cadVrOspfEnabledtrue if OSPFv2 is to be enabled for this Virtual Router,
false otherwise.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.3 |
cadVrRipEnabledtrue if RIPv2 is to be enabled for this Virtual Router,
false otherwise.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.4 |
cadVrRowStatusThe row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createAndGo,
and destroy. Other three states notInService, notReady and
createAndWait are not permitted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.5 |
cadVrScmAccessEnabledtrue if SCM access is enabled for this virtual router, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.6 |
cadVrScmAccessDirectedBroadcastEnabledtrue if SCM directed-broadcast is enabled for this virtual router, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.7 |
cadVrNullInterfacetrue if ICMP destination unreachable is send when routing to a null interface, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.8 |
cadVrICMPTimeExceededEnabledtrue if ICMP Time Exceeded message is sent upon receiving packet with TTL = 0 or 1, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.9 |
cadVrOspfGracefulRestartEnabledtrue if OSPF graceful restart is enabled,
false otherwise.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.10 |
cadVrIPv6ReflectionEnabledtrue if IPv6 reflection is enabled. Only for the D cardrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.11 |
cadVrICMPv6TimeExceededEnabledtrue if ICMPv6 Time Exceeded message is sent upon receiving packet with TTL = 0 or 1, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.12 |
cadVrNullInterfacev6true if ICMPv6 destination unreachable is send when routing to a null interface, false otherwiserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.13 |
cadVrPhpEnabledDetermines whether a VRF uses PHP or UHP for MPLS LSP tail-end behavior.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.14 |
cadVrAutoImportEnabledtrue if VRF is performing auto import of routesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.2.1.15 |
cadVrInterfaceTableThis table defines interfaces for each virtual router.
A virtual router may have multiple interfaces. SEQUENCE OF CadVrInterfaceEntry .1.3.6.1.4.1.4998.1.1.25.3.1.3 |
cadVrInterfaceEntryAn interface entry for a particular virtual router. CadVrInterfaceEntry .1.3.6.1.4.1.4998.1.1.25.3.1.3.1 |
cadVrInterfaceIfIndexVirtual router interface ID associated with a virtual router
and the Bridge Group. This value is computed. It should
correspond to the index value in the ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.1 |
cadVrInterfaceIpAddrThe primary IP address for this virtual router interface.
Currently, only IPv4 is supported, so only values that have 0 or
4 OCTETS are allowed. After this value has been set to 4 OCTETS,
then it may not be reset back to 0 OCTETS.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.2 |
cadVrInterfaceIpMaskThe primary subnet mask for this virtual router interface.
Currently, only IPv4 is supported, so only values that have 0 or
4 OCTETS are allowed. After this value has been set to 4 OCTETS,
then it may not be reset back to 0 OCTETS.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.3 |
cadVrInterfaceDHCPEnabledThis is the current state of DHCP Relay for this virtual
router interface. If there is at least one row in the
cadVrDhcpServerTable for this interface, then this value
is true. Otherwise, it is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.4 |
cadVrInterfaceFARPEnabledThis is the current state of ARP forwarding for this virtual
router interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.5 |
cadVrInterfaceRipEnabledIf this value is set to true, then RIP is enabled for this
interface. Otherwise RIP will be turned off for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.6 |
cadVrInterfaceRipPassiveIf this value is set to true, then RIP route updates will not be sent
out this interface. Otherwise, RIP routes updates will be sent out
this interface, but only if RIP is enabled for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.7 |
cadVrInterfaceIGMPEnabledIf this value is set to true, then IGMP is enabled for this
interface. Otherwise IGMP will be turned off for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.8 |
cadVrInterfaceIRDPEnabledIf this value is set to true, then IRDP is enabled for this
interface. Otherwise IRDP will be turned off for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.9 |
cadVrInterfaceRowStatusThe row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createAndGo,
and destroy. Other three states notInService, notReady and
createAndWait are not permitted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.10 |
cadVrInterfaceDHCPPolicyEnabledIf set to true, then the secondary IP address of this interface
will be used for the giaddr.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.11 |
cadVrInterfaceDirectedBcastEnabledIf set to true, then subnet-directed broadcast IP packets are
forwarded on this interface. Otherwise, subnet-directed broadcast
IP packets are dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.12 |
cadVrInterfaceSourceVerifyCurrent state of Source Verify for this virtual router interface.
May only assume values other than `none' for cable interfaces. May
only assume values other than `none' or `internal' for cable
interfaces that have a DHCP helper address defined.rw CadSourceVerifyType .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.13 |
cadVrInterfaceSubFilterDownDefaultper-VRI equivalent of docsSubMgtSubFilterDownDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.14 |
cadVrInterfaceSubFilterUpDefaultper-VRI equivalent of docsSubMgtSubFilterUpDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.15 |
cadVrInterfaceCmFilterDownDefaultper-VRI equivalent of docsSubMgtCmFilterDownDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.16 |
cadVrInterfaceCmFilterUpDefaultper-VRI equivalent of docsSubMgtCmFilterUpDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.17 |
cadVrInterfaceSubifIndexThe index value which identifies a subinterface. Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.18 |
cadVrInterfaceVrIndexThe cadVrIndex of the row in the cadVrTable associated with this subinterface.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.19 |
cadVrInterfaceIsLoopbackDetermine if this virtual router interface is a loopback interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.20 |
cadVrInterfaceRestrictedFARPEnabledThis is the current state of Restricted ARP forwarding for this virtual
router interface. Note this is only valid for DOCSIS interfaces.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.21 |
cadVrInterfaceAdminStatThe administrative status of the VRInterface.
This status is only applicable to loopback interface
which has CadVrInterfaceIsLoopback set to true.
It could be enabled (1) or disabled (2).
All other VRInterfaces will not use this field.rw Enumeration .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.22 |
cadVrInterfaceIcmpUnreachablesEnabledTrue if ICMP unreachable messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.23 |
cadVrInterfaceDescriptionA persistent copy of ifAlias for this interface.rw DisplayString .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.24 |
cadVrInterfaceEncapTypeThis object identifies the subinterface encapsulation
type with the following values supported
l3ipvlan (136) - Layer 3 Virtual LAN using IP (SIP prefix selector)
l2vlan (135) - Layer 2 Virtual LAN using 802.1Q (VLANid selector)rw IANAifType (IANAifType-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.25 |
cadVrInterfaceVlanId- if cadVrInterfaceEncapType is l2vlan (135) then this object contains
the VLANid assigned by the encapsulation dot1q <VLANid> CLI subcommand.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.26 |
cadVrInterfacePriorityThis object contains the enumeration of the priority values to be set in
the 802.1p bits for the subinterface. The enumeration values p0(0)..p7(7)
represent a fixed priority to be applied to the egress Q-tags, and the
value iptos(8) represents the mapping from IP TOS precedence bits to the
802.1p bits on egress. The default value is p0(0).rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.27 |
cadVrInterfaceScmAccessThis object contains the SCM access permissions whenever the cadVrInterfaceEncapType
object is set to l2vlan. The default value is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.28 |
cadVrInterfaceIpAddrTypeThe primary IP address type for this virtual router interface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.29 |
cadVrInterfaceIpPrefixLengthThe prefix length for this virtual router interface IPv4 address.
Used in lieu of the subnet mask.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.30 |
cadVrInterfaceIpScopeTypeThe scope type for this virtual router interface IP address.
Applicable to IPv6 addresses.rw InetScopeType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.31 |
cadVrInterfaceIpv6AddrThe primary IP address for this virtual router interface.
This is the IPv6 address, so only values that have 8 or
16 OCTETS are allowed.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.32 |
cadVrInterfaceIpv6PrefixLengthThe prefix length for this virtual router interface IPv6 address.
Used in lieu of the subnet mask.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.33 |
cadVrInterfaceDADAttemptsThe pnumber of IPv6 duplicate address messages sentrw Unsigned32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.34 |
cadVrInterfaceIpv6ForwardingDetermines whether IPv6 traffic should be allowed on this interface.ro Enumeration .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.35 |
cadVrInterfacePsFilterDownDefaultper-VRI equivalent of docsSubMgtPsFilterDownDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.36 |
cadVrInterfacePsFilterUpDefaultper-VRI equivalent of docsSubMgtPsFilterUpDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.37 |
cadVrInterfaceMtaFilterDownDefaultper-VRI equivalent of docsSubMgtMtaFilterDownDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.38 |
cadVrInterfaceMtaFilterUpDefaultper-VRI equivalent of docsSubMgtMtaFilterUpDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.39 |
cadVrInterfaceStbFilterDownDefaultper-VRI equivalent of docsSubMgtStbFilterDownDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.40 |
cadVrInterfaceStbFilterUpDefaultper-VRI equivalent of docsSubMgtStbFilterUpDefaultrw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.41 |
cadVrInterfaceIcmpv6UnreachablesEnabledTrue if ICMPv6 unreachable messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.46 |
cadVrInterfaceIcmpv6TooBigEnabledTrue if ICMPv6 too big messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.47 |
cadVrInterfaceIcmpv6ParameterProblemEnabledTrue if ICMPv6 parameter problem messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.48 |
cadVrInterfacePdRiEnabledEnable or disable route injection for DHCP Relay
IPv6 prefix delegation per interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.49 |
cadVrInterfacePolicyRouteMapId of the policy route map to use for packets
traversing this interface. 0 implies no policy routing.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.50 |
cadVrInterfaceMplsEnabledIf this value is set to true, then MPLS encapsulation is enabled for this
interface. Otherwise MPLS Encapsulation will be turned off for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.51 |
cadVrInterfaceLdpEnabledIf this value is set to true, then LDP is enabled for this
interface. Otherwise LDP will be turned off for this interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.52 |
cadVrInterfaceGratuitousArpEnabledEnable or disable sending gratuitous ARPs on
an Ethernet or a LAG interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.53 |
cadVrInterfaceIsSdvIndicates whether this interface is the global SDV
multicast interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.3.1.54 |
cadVrSecondaryIpAddrTableThis table defines secondary interfaces for each virtual
router. A virtual router may have multiple interfaces. A virtual
router interface is uniquely identified by its {cadVrInterfaceSubifIndex,
cadBgIndex} tuple. Each virtual router interface may also
have zero(0) or one(1) primary IP addresses associated with
it. There must be a primary address bound to an interface before
any secondary IP addresses may be assigned to that same interface.
There may be as many secondary IP addresses as desired. SEQUENCE OF CadVrSecondaryIpAddrEntry .1.3.6.1.4.1.4998.1.1.25.3.1.4 |
cadVrSecondaryIpAddrEntryA secondary, or aliased, IP address for a particular virtual
router interface. CadVrSecondaryIpAddrEntry .1.3.6.1.4.1.4998.1.1.25.3.1.4.1 |
cadVrSecondaryIpMaskThe subnet mask for this secondary IP address for this virtual
router interface. Currently, only IPv4 is supported, so only values
that have 0 or 4 OCTETS are allowed. After this value has
been set to 4 OCTETS, then it may not be reset back to 0 OCTETS. InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.1 |
cadVrSecondaryIpAddrRowStatusThe row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createAndGo,
and destroy. The other three states: notInService, notReady and
createAndWait, are not permitted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.2 |
cadVrSecondaryIpAddrDHCPPolicyEnabledThis SNMP entry is no longer used and has been replaced by
cadVrSecondaryIpAddrDHCPGiaddr. Old description:
'If set to true, then the secondary IP address of this interface
will be among those used for the giaddr for DHCP of CPEs.'rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.4 |
cadVrSecondaryIpPrefixLengthThe IP prefix length for this secondary IP address for this virtual
router interface. This is used in lieu of the subnet mask.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.5 |
cadVrSecondaryIpAddrTypeThe IP address type for this secondary IP address for this virtual
router interface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.6 |
cadVrSecondaryIpScopeTypeThe scope type for this virtual router interface IP address.
Applicable to IPv6 addresses.rw InetScopeType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.7 |
cadVrSecondaryIpAddrDHCPGiaddrIf set, then the secondary IP address of this interface
will be among those used for the giaddr for DHCP of that
particular type of CPE host. Note: CPE is the default type
for any device which can not be classified via option 43.2
or 60 of the DHCP-DISCOVER message.rw CadCpeDeviceTypes (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.4.1.8 |
cadVrStatusTableThis entity's Virtual Routing status table containing many
virtual routers. SEQUENCE OF CadVrStatusEntry .1.3.6.1.4.1.4998.1.1.25.3.1.5 |
cadVrStatusEntryA particular virtual router's status. CadVrStatusEntry .1.3.6.1.4.1.4998.1.1.25.3.1.5.1 |
cadVrStatusVrIndexThe index value which identifies a virtual router. Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.1 |
cadVrStatusNumLocalRoutesThe number of IPv4 local routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.2 |
cadVrStatusNumNetmgmtRoutesThe number of IPv4 network management routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.3 |
cadVrStatusNumRipRoutesThe number of IPv4 RIP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.4 |
cadVrStatusNumIsisInternal1RoutesThe number of IPv4 internal level 1 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.5 |
cadVrStatusNumIsisInternal2RoutesThe number of IPv4 internal level 2 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.6 |
cadVrStatusNumIsisExternal1RoutesThe number of IPv4 external level 1 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.7 |
cadVrStatusNumIsisExternal2RoutesThe number of IPv4 external level 2 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.8 |
cadVrStatusNumBgpIntRoutesThe number of IPv4 internal BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.9 |
cadVrStatusNumBgpExtRoutesThe number of IPv4 external BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.10 |
cadVrStatusNumBgpVpnRoutesThe number of IPv4 VPN BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.11 |
cadVrStatusNumOspfIntraAreaRoutesThe number of IPv4 OSPF intra-area routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.12 |
cadVrStatusNumOspfInterAreaRoutesThe number of IPv4 OSPF inter-area routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.13 |
cadVrStatusNumOspfInternal1RoutesThe number of IPv4 OSPF internal-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.14 |
cadVrStatusNumOspfInternal2RoutesThe number of IPv4 OSPF internal-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.15 |
cadVrStatusNumOspfExternal1RoutesThe number of IPv4 OSPF external-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.16 |
cadVrStatusNumOspfExternal2RoutesThe number of IPv4 OSPF external-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.17 |
cadVrStatusNumOspfNssaExternal1RoutesThe number of IPv4 OSPF NSSA external-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.18 |
cadVrStatusNumOspfNssaExternal2RoutesThe number of IPv4 OSPF NSSA external-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.19 |
cadVrStatusNumOtherRoutesThe number of IPv4 routes that are not classified.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.20 |
cadVrStatusNumIpv6LocalRoutesThe number of IPv6 local routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.21 |
cadVrStatusNumIpv6NetmgmtRoutesThe number of IPv6 network management routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.22 |
cadVrStatusNumIpv6IsisInternal1RoutesThe number of IPv6 internal level 1 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.23 |
cadVrStatusNumIpv6IsisInternal2RoutesThe number of IPv6 internal level 2 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.24 |
cadVrStatusNumIpv6IsisExternal1RoutesThe number of IPv6 external level 1 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.25 |
cadVrStatusNumIpv6IsisExternal2RoutesThe number of IPv6 external level 2 IS-IS routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.26 |
cadVrStatusNumIpv6OspfIntraAreaRoutesThe number of IPv6 OSPF intra-area routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.27 |
cadVrStatusNumIpv6OspfInterAreaRoutesThe number of IPv6 OSPF inter-area routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.28 |
cadVrStatusNumIpv6OspfInternal1RoutesThe number of IPv6 OSPF internal-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.29 |
cadVrStatusNumIpv6OspfInternal2RoutesThe number of IPv6 OSPF internal-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.30 |
cadVrStatusNumIpv6OspfExternal1RoutesThe number of IPv6 OSPF external-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.31 |
cadVrStatusNumIpv6OspfExternal2RoutesThe number of IPv6 OSPF external-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.32 |
cadVrStatusNumIpv6OspfNssaExternal1RoutesThe number of IPv6 OSPF NSSA external-1 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.33 |
cadVrStatusNumIpv6OspfNssaExternal2RoutesThe number of IPv6 OSPF NSSA external-2 routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.34 |
cadVrStatusNumIpv6PdRoutesThe number of IPv6 PD routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.35 |
cadVrStatusNumIpv6OtherRoutesThe number of IPv6 routes that are not classified.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.36 |
cadVrStatusNumIpv6BgpIntRoutesThe number of IPv6 internal BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.37 |
cadVrStatusNumIpv6BgpExtRoutesThe number of IPv6 external BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.38 |
cadVrStatusNumIpv6BgpVpnRoutesThe number of IPv6 VPN BGP routes.ro Gauge32 UNITS "routes" .1.3.6.1.4.1.4998.1.1.25.3.1.5.1.39 |
cadVrInterfaceStatusTableThis entity's Virtual Routing Interface status table containing
many virtual interfaces. SEQUENCE OF CadVrInterfaceStatusEntry .1.3.6.1.4.1.4998.1.1.25.3.1.6 |
cadVrInterfaceStatusEntryA particular virtual router interface's status. CadVrInterfaceStatusEntry .1.3.6.1.4.1.4998.1.1.25.3.1.6.1 |
cadVrInterfaceStatusIfIndexVirtual router interface ID. This value is computed. It should
correspond to the index value in the ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.6.1.1 |
cadVrInterfaceStatusIcmpUnreachablesDroppedThe number of ICMP unreachable packets dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.4998.1.1.25.3.1.6.1.2 |
cadVrInterfaceStatusIcmpv6UnreachablesDroppedThe number of ICMPv6 unreachable packets dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.4998.1.1.25.3.1.6.1.3 |
cadVrGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.3.1.7 |
cadVrGlobalIcmpUnreachablesEnabledTrue if ICMP unreachable messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.7.1 |
cadVrGlobalIpForwardingThe indication of whether this entity is acting as an IPv4
router in respect to the forwarding of datagrams received
by, but not addressed to, this entity. IPv4 routers forward
datagrams. IPv4 hosts do not (except those source-routed
via the host).rw Enumeration .1.3.6.1.4.1.4998.1.1.25.3.1.7.2 |
cadVrGlobalIpDefaultTTLThe default value inserted into the Time-To-Live field of
the IPv4 header of datagrams originated at this entity,
whenever a TTL value is not supplied by the transport layer
protocol.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.7.3 |
cadVrGlobalIpv6IpForwardingThe indication of whether this entity is acting as an IPv6
router on any interface in respect to the forwarding of
datagrams received by, but not addressed to, this entity.
IPv6 routers forward datagrams. IPv6 hosts do not (except
those source-routed via the host).rw Enumeration .1.3.6.1.4.1.4998.1.1.25.3.1.7.4 |
cadVrGlobalIpv6IpDefaultHopLimitThe default value inserted into the Hop Limit field of the
IPv6 header of datagrams originated at this entity whenever
a Hop Limit value is not supplied by the transport layer
protocol.rw Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.7.5 |
cadVrGlobalIcmpv6UnreachablesEnabledTrue if ICMPv6 unreachable messages are sentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.7.6 |
cadVrGlobalIcmpv6TooBigEnabledTrue if ICMPv6 too big enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.7.7 |
cadVrGlobalIcmpv6ParameterProblemEnabledTrue if ICMPv6 too big enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.7.8 |
cadVrGlobalAllowAnyCableMacTrue if disabling unicast upstream cable-mac checking of the Ethernet DMAC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.7.10 |
cadVrGlobalStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.3.1.8 |
cadVrGlobalStatusIcmpUnreachablesDroppedThe number of ICMP unreachable packets dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.4998.1.1.25.3.1.8.1 |
cadVrGlobalStatusIcmpv6UnreachablesDroppedThe number of ICMPv6 unreachable packets dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.4998.1.1.25.3.1.8.2 |
cadVrAddressPrefixTableThis table defines prefixes for each virtual router interface.
A virtual router interface may have multiple prefixes. SEQUENCE OF CadVrAddressPrefixEntry .1.3.6.1.4.1.4998.1.1.25.3.1.9 |
cadVrAddressPrefixEntryAn interface entry for a particular virtual router. CadVrAddressPrefixEntry .1.3.6.1.4.1.4998.1.1.25.3.1.9.1 |
cadVrAddressPrefixTypeThe address type of the the address prefix.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.1 |
cadVrAddressPrefixPrefixThe address prefix. The address type of this object is
specified in ipAddressPrefixType. The length of this object
is the standard length for objects of that type (4 or 16
bytes). Any bits after ipAddressPrefixLength must be zero.
Implementors need to be aware that, if the size of
ipAddressPrefixPrefix exceeds 114 octets, then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.2 |
cadVrAddressPrefixLengthThe prefix length associated with this prefix.
The value 0 has no special meaning for this object. It
simply refers to address '::/0'.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.3 |
cadVrAddressPrefixAdvertiseFlagThis object have the true(1), if this prefix can be
sent in router advertisements. If false(2), it is not
sent in router advertisements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.4 |
cadVrAddressPrefixOnLinkFlagThis object have the true(1), if this prefix can be
sent in router advertisements. If false(2), it is not
sent in router advertisements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.5 |
cadVrAddressPrefixAutonomousFlagAutonomous address configuration flag. When true(1),
indicates that this prefix can be used for autonomous
address configuration (i.e., can be used to form a local
interface address). If false(2), it is not used to auto-
configure a local interface address.
The default for IPv4 prefixes is 'false(2)'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.6 |
cadVrAddressPrefixAdvPreferredLifetimeThe remaining length of time, in seconds, that this prefix
will continue to be preferred, i.e., time until deprecation.
A value of 4,294,967,295 represents infinity.
The address generated from a deprecated prefix should no
longer be used as a source address in new communications,
but packets received on such an interface are processed as
expected.
The default for IPv4 prefixes is 4,294,967,295 (infinity).rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.7 |
cadVrAddressPrefixAdvValidLifetimeThe remaining length of time, in seconds, that this prefix
will continue to be valid, i.e., time until invalidation. A
value of 4,294,967,295 represents infinity.
The address generated from an invalidated prefix should not
appear as the destination or source address of a packet.
The default for IPv4 prefixes is 4,294,967,295 (infinity).rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.8 |
cadVrAddressPrefixAdvPreferredDateThe date that this prefix will continue to be preferred.
The address generated from a deprecated prefix should no
longer be used as a source address in new communications,
but packets received on such an interface are processed as
expected.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.9 |
cadVrAddressPrefixAdvValidDateThe date that this prefix will continue to be valid.
The address generated from an invalidated prefix should not
appear as the destination or source address of a packet.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.10 |
cadVrAddressPrefixRowStatusThe control for adding and removing address prefix rows.
Setting this value to createAndGo(4) will cause a row to
be added, and setting this value to destroy(6) will cause
the row to be removed. These are the only two values that
may be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.9.1.11 |
cadVrRtLookupTableThis entity's Virtual Routing status table containing many
virtual routers. SEQUENCE OF CadVrRtLookupEntry .1.3.6.1.4.1.4998.1.1.25.3.1.10 |
cadVrRtLookupEntryA particular virtual router's status. CadVrRtLookupEntry .1.3.6.1.4.1.4998.1.1.25.3.1.10.1 |
cadVrRtLookupVrIndexThe index value which identifies a virtual router. Integer32 .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.1 |
cadVrRtLookupInetAddrTypeThe ipv4 or ipv6 address type of the the address prefix.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.2 |
cadVrRtLookupInetAddrThe IP address for the lookup.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.3 |
cadVrRtLookupPrefixLengthThe address prefix lengthrw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.4 |
cadVrRtLookupInetAddrResultThe IP address result from the lookup.ro InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.5 |
cadVrRtLookupPrefixLengthResultThe address prefix length result from the lookupro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.25.3.1.10.1.6 |