CADANT-OSPF-MIB
The CADANT-OSPF-MIB enables monitoring and configuration of OSPF Version 2 protocol instances on Cadant Virtual Routers, providing access to standard OSPF MIB objects such as interface states, neighbor adjacencies, LSDB synchronization status, and routing table metrics. This module facilitates the tracking of protocol convergence, link failures, and topology changes within the vendor's specific OSPF implementation.
Imported Objects
Objects
15 total| Object Name |
|---|
cadOspfThe MIB module to control and report on the Cadant Virtual Router
implementation of the OSPF Version 2 Protocol. This MIB mirrors
draft-ietf-ospf-mib-update-05. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.25.5 |
cadOspfRouteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.13 |
cadOspfIntraArea OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.13.1 |
cadOspfInterArea OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.13.2 |
cadOspfExternalType1 OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.13.3 |
cadOspfExternalType2 OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.13.4 |
cadOspfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.15 |
cadOspfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.15.1 |
cadOspfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.25.5.15.2 |
cadOspfNetworkEnableTable SEQUENCE OF CadOspfNetworkEnableEntry .1.3.6.1.4.1.4998.1.1.25.5.20 |
cadOspfNetworkEnableEntry CadOspfNetworkEnableEntry .1.3.6.1.4.1.4998.1.1.25.5.20.1 |
cadOspfNetworkEnableIpaddressro IpAddress .1.3.6.1.4.1.4998.1.1.25.5.20.1.1 |
cadOspfNetworkEnableWildcardro IpAddress .1.3.6.1.4.1.4998.1.1.25.5.20.1.2 |
cadOspfNetworkEnableAreaIdrw AreaID (OSPF-MIB) .1.3.6.1.4.1.4998.1.1.25.5.20.1.3 |
cadOspfNetworkEnableRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.5.20.1.4 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.