CADANT-LOADBALANCING-MIB
AI MIB Summary
The CADANT-LOADBALANCING-MIB enables monitoring of internal CAM load balancing states and traffic distribution metrics on Cadant hardware platforms. It provides visibility into session allocation and load distribution parameters specific to the vendor's proprietary load balancing architecture.
This MIB module contains Cadant internal data schema for CAM Load Balancing
Main OID:
cadLoadBalMib.1.3.6.1.4.1.4998.1.1.50.1
50
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
cadLoadBalMibThis MIB module contains Cadant internal data schema for CAM Load Balancing MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.50.1 |
cadLoadBalChgOverStatusTableA table of CMTS operation entries to reports the status
of cable modems instructed to move to a new downstream and/or
upstream channel. SEQUENCE OF CadLoadBalChgOverStatusEntry .1.3.6.1.4.1.4998.1.1.50.1.1 |
cadLoadBalChgOverStatusEntryThe status of the specified DCC/UCC operation CadLoadBalChgOverStatusEntry .1.3.6.1.4.1.4998.1.1.50.1.1.1 |
cadLoadBalChgOverStatusValueThe status of the specified DCC/UCC operation.ro Enumeration .1.3.6.1.4.1.4998.1.1.50.1.1.1.1 |
cadLoadBalCmtsCmStatusTableThe list contains the load balancing attributes
associated with the cable modem. SEQUENCE OF CadLoadBalCmtsCmStatusEntry .1.3.6.1.4.1.4998.1.1.50.1.2 |
cadLoadBalCmtsCmStatusEntryAdditional objects for docsIfCmtsCmStatusTable entry
that relate to load balancing CadLoadBalCmtsCmStatusEntry .1.3.6.1.4.1.4998.1.1.50.1.2.1 |
cadLoadbal3CmtsCmParamsProvGrpIdThis attribute indicates the provisioned Load Balancing
Group ID TLV the CM signaled to the CMTS during
registration, or zero if not provisioned in the CM.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.2.1.1 |
cadLoadbal3CmtsCmParamsCurrentGrpIdThis attribute references the Load Balancing Group
Identifier (Id attribute from the GrpStatus object)
associated with the cable modem after the CMTS validates
the CM Load Balancing Group ID TLV, Service Type
ID TLV and Restricted CM list. The value zero indicates
that the Load Balancing Group is invalid, or the
General Load Balancing Group is invalid due ambiguous
topology resolution.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.2.1.2 |
cadLoadbal3CmtsCmParamsProvServiceTypeIDThis attribute indicates the provisioned Service
Type ID TLV the CM signaled to the CMTS during registration,
or the zero-length string if not provisioned
in the CM.ro SnmpAdminString .1.3.6.1.4.1.4998.1.1.50.1.2.1.3 |
cadLoadbal3CmtsCmParamsCurrentServiceTypeIDThis attribute represents the Service Type ID the
CMTS picked from the Restricted Group of Restricted
CM list, or the Service Type Id TLV the CM signaled to the
CMTS during registration, or the zero-length string
if none was used.ro SnmpAdminString .1.3.6.1.4.1.4998.1.1.50.1.2.1.4 |
cadLoadbal3CmtsCmParamsPolicyIdThis attribute references the Load Balancing Policy
ID associated to the cable modem either from the configuration
file or from the General or Restricted
Load Balancing Groups CMTS configuration.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.2.1.5 |
cadLoadbal3CmtsCmParamsPriorityThis attribute references the Load Balancing Priority
associated to the cable modem either from the configuration
file or from the General or Restricted
Load Balancing Groups CMTS configuration.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.2.1.6 |
cadLoadBalBasicRuleTableThis table extends the docsLoadBalBasicRule table with
additional methods and thresolds. SEQUENCE OF CadLoadBalBasicRuleEntry .1.3.6.1.4.1.4998.1.1.50.1.4 |
cadLoadBalBasicRuleEntryLoad balancing count for Change Over within a load balancing group CadLoadBalBasicRuleEntry .1.3.6.1.4.1.4998.1.1.50.1.4.1 |
cadLoadBalRuleMethodcm-count uses dynamic load balancing of upstream receivers in the same
load balancing group to balance the number of CMs per upstream channel.
channel-utilization uses dynamic load balancing of the upstream receivers
in the same load balancing group to balance the channel utilization of
the channels in the group.rw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.4.1.1 |
cadLoadBalRuleTyperule-static enables load balancing at modem initial maintenance
ranging time.
rule-non-bonded-dcc enables dynamic load balancing by moving non-
bonded CMs with DCC just after modem registration time and at
regular intervals according to the load balance interval settings.
rule-bonded-dcc enables dynamic load balancing by moving bonded CMs
with DCC just after modem registration time and at regular
intervals according to the load balance interval settings.
rule-bonded-us-dbc enables dynamic load balancing by moving upstream
bonded CMs with DBC just after modem registration time and at
regular intervals according to the load balance interval settings.
rule-bonded-ds-dbc enables dynamic load balancing by moving
downstream bonded CMs with DBC just after modem registration time
and at regular intervals according to the load balance interval
settings.
Multiple rule types can be set, enabling a combination of load
balancing mechanisms to be selected.rw Bits .1.3.6.1.4.1.4998.1.1.50.1.4.1.2 |
cadLoadBalRuleThresholdThis is the size of load difference between channels that is tolerated
before load balancing will be started.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.4.1.3 |
cadLoadBalRuleRegistrationSteeringD2If this object is set to true the C4 is directed to move any D2.0 CMs registering on a TDMA channel
to an ATDMA channel in the load balance group.
This occurs immediately after the C4 receives a registration-acknowledge from the CM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.4.1.4 |
cadLoadBalRuleRegistrationSteeringD3If this object is set to true the C4 is directed to move any D3.0 CMs registering on a TDMA channel
to an ATDMA channel in the load balance group.
This occurs immediately after the C4 receives a registration-acknowledge from the CM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.4.1.5 |
cadLoadBalRulePeriodicSteeringD2If this object is set to true the C4 is directed to audit all TDMA channels
in an active load balance group and move D2.0 CMs to an ATDMA channel in the load balance group.
One CM is moved per TDMA channel per macdomain-check-interval.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.4.1.6 |
cadLoadBalRulePeriodicSteeringD3If this object is set to true the C4 is directed to audit all TDMA channels
in an active load balance group and move D3.0 CMs to an ATDMA channel in the load balance group.
One CM is moved per TDMA channel per macdomain-check-interval.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.4.1.7 |
cadLoadBalRuleChannelWeight'equal' directs the load balancer to use DS and US channel load equally to determine
load balancing decisions.
'usOnly' directs the load balancer to only use US channel load to determine
load balancing decisions.
'dsOnly' directs the load balancer to only use DS channel load to determine
load balancing decisions.
'usPlus' directs the load balancer to double US channel load over DS channel load to determine
load balancing decisions.
'dsPlus' directs the load balancer to double DS channel load over US channel load to determine
load balancing decisions.rw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.4.1.8 |
cadLoadBalExcludedOUITableThis table contains a list of OUIs that should not be
moved through dynamic load balancing. SEQUENCE OF CadLoadBalExcludedOUIEntry .1.3.6.1.4.1.4998.1.1.50.1.5 |
cadLoadBalExcludedOUIEntryAn OUI that describes a set of modems not to be moved by load balancing. CadLoadBalExcludedOUIEntry .1.3.6.1.4.1.4998.1.1.50.1.5.1 |
cadLoadBalExclOUIAddressThe OUI of the modem set to exclude from load balancing. OUIAddress (CADANT-TC) .1.3.6.1.4.1.4998.1.1.50.1.5.1.1 |
cadLoadBalExclRowStatusThe status object for adding and removing rows from this table.
The only valid values are createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.5.1.2 |
cadLoadBalSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.50.1.6 |
cadLoadBalMacDomainLoadBalanceIntervalInterval between checking the loading of the MAC domain
to determine if any modems need to be moved to different channels within a MAC domain.
A value of 0 disables checking.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.5 |
cadLoadBalAcrossMacDomainLoadBalanceIntervalInterval between checking the loading of multiple MAC domains
to determine if any modems need to be moved to the channels across different MAC domains.
A value of 0 disables checking.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.6 |
cadLoadBalStartDsUtilizationThresholdInterval to start downstream channel utilization threshold.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.7 |
cadLoadBalStartUsUtilizationThresholdInterval to start upstream channel utilization threshold.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.8 |
cadLoadBalFailedListAgeOutTimeRemove an entry from the Load-Balance failed list after it has been on the list for the specified number of hours.rw Unsigned32 UNITS "hours" .1.3.6.1.4.1.4998.1.1.50.1.6.9 |
cadLoadBalFailedListExcludeCountWhen attempting to move from one pair of DS/US channels to a target pair of DS/US channels,
a CM will be excluded from attempting to move between this set of channels after the number of failures reaches this object.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.10 |
cadLoadBalNumberModemsToCheckPerIntervalThe objects indicates the number of CMs to check for high utilization at each macdomain-check-interval.
A higher number will evaluate more CMs on the overloaded DS/US channels to find the heaviest user to
move to less loaded channels. Therefore, a higher number will cause heavy users to be load balanced more frequently.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.50.1.6.11 |
cadLoadBalChannelTableThis table contains the count information of the load balancing
group channels present in the C4. SEQUENCE OF CadLoadBalChannelEntry .1.3.6.1.4.1.4998.1.1.50.1.7 |
cadLoadBalChannelEntryLoad balancing counts for a downstream or upstream channel. CadLoadBalChannelEntry .1.3.6.1.4.1.4998.1.1.50.1.7.1 |
cadLoadBalChannelUtilizationThe downstream channel utilization snapshot captured by the
CAM during the last dynamic balancing interval. This
value is valid for both downstream and upstream channels.ro Integer32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.1 |
cadLoadBalChannelCmCountThe count of cable modems associated with the channel. This
value is valid for both downstream and upstream channels.ro Integer32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.2 |
cadLoadBalChannelDynamicTransfersInThe number of successful modem transfers from other channels
initiated by the dynamic load balancer. This
value is valid for both downstream and upstream channels.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.3 |
cadLoadBalChannelDynamicTransfersOutThe number of successful modem transfers to other channels
initiated by the dynamic load balancer. This
value is valid for both downstream and upstream channels.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.4 |
cadLoadBalChannelStaticTransfersInThe number of successful modem transfers from other channels
initiated by the static load balancer. This value is valid
for upstream channels only.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.5 |
cadLoadBalChannelStaticTransfersOutThe number of successful modem transfers to other channels
initiated by the static load balancer. This value is valid
for upstream channels only.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.6 |
cadLoadBalChannelDbcTransfersInThe number of times the particular channel has been moved into a
modem's channel-set via DBC load balancing. This value is valid
for both downstream and upstream channels.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.7 |
cadLoadBalChannelDbcTransfersOutThe number of times the particular channel has been moved out of a
modem's channel-set via DBC load balancing. This value is valid
for both downstream and upstream channels.ro Counter32 .1.3.6.1.4.1.4998.1.1.50.1.7.1.8 |
cadLoadBalControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.50.1.8 |
cadLoadBalClearCountsSetting this value to true will reset the counts associated with
load balancing. Reading this value will always return false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.50.1.8.1 |
cadLoadBalRCSControlIf set to enable(1), RCS load balancing will always be permitted.
If set to disable(2), RCS load balancing is never permittedrw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.8.2 |
cadLoadBalTCSControlIf set to enable(1), TCS load balancing will always be permitted.
If set to disable(2), TCS load balancing is never permittedrw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.8.3 |
cadLoadBalTCSMoveUsPrimaryControlIf set to enable(1), an upstream bonded CM's primary upstream
channel will be allowed
to be moved as part of registration Transmit Channel Set (TCS) load
balancing.
If set to disable(2), an upstream bonded CM's primary upstream
channel will NOT be allowed to be moved as part of registration
Transmit Channel Set (TCS) load balancing.rw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.8.4 |
cadLoadBalDbcMoveUsPrimaryControlIf set to enable(1), an upstream bonded CM's primary upstream
channel will be allowed to be moved via DBC load balancing.
If set to disable(2), an upstream bonded CM's primary upstream
channel will NOT be allowed to be moved via DBC load balancing.rw Enumeration .1.3.6.1.4.1.4998.1.1.50.1.8.5 |