CADANT-CMTS-PC-EVENTMSG-MIB
The CADANT-CMTS-PC-EVENTMSG-MIB facilitates PacketCable event message monitoring and management between Cadant C4 Cable Modem Termination Systems (CMTS) and external record-keeping or distribution servers. It provides specific MIB objects to track the status and transmission of PacketCable signaling events, enabling the validation of event delivery integrity and the auditing of session-related state changes within the CMTS infrastructure.
Imported Objects
Objects
14 total| Object Name |
|---|
cadEvMsgMIBPacketCable event message MIB. This MIB
contains objects for PacketCable Event Messaging
between the Cadant C4 CMTS and a record keeping server
or distribution function. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.115.1.5 |
cadEvMsgMibBase OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.115.1.5.1 |
cadEvMsgElementTypeElement type to be included in Event Message header.
Default value 2 = CMTS.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.1 |
cadEvMsgElementIdFive digit Element ID to be included in Event Message header.
Must be unique network-wide.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.2 |
cadEvMsgMaxAgeMaximum amount of time, in minutes, that an event message
destined for the RKS may reside in the CMTS, for UDP-based
batch mode.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.3 |
cadEvMsgRetransTimerMaximum amount of time, in milliseconds, that the CMTS will wait
for the RKS to acknowledge an event message before
attempting to retransmit the message.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.4 |
cadEvMsgMaxRetryMaximum number of retry attempts for transmitting an event
message. If this value is set to 0, then we only try
once.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.5 |
cadEvMsgMaxBatchSizeMaximum number of radius event messages that can be batched.
This value must be set to greater than 1 to allow batchingrw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.1.6 |
cadEvMsgEnableFlagBoolean for enabling/disabling Event Messagingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.5.1.7 |
cadEvMsgTransTimeTableTable of up to 24 time-of-day values for Event Messaging. SEQUENCE OF CadEvMsgTransTimeEntry .1.3.6.1.4.1.4998.1.1.115.1.5.2 |
cadEvMsgTransTimeEntryThis entry contains one row in the table. CadEvMsgTransTimeEntry .1.3.6.1.4.1.4998.1.1.115.1.5.2.1 |
cadEvMsgTransTimeIdxAn index into the cadEvMsgTransTimeTable. There can
be up to 24 entries. Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.5.2.1.1 |
cadEvMsgTransTODTime of day to transmit Event Messages, in HH:MM formatrw TimeOfDay .1.3.6.1.4.1.4998.1.1.115.1.5.2.1.2 |
cadEvMsgTransTimeStatusRow status entry for the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.5.2.1.3 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.