CADANT-CMTS-IP-VIDEO-MIB
The CADANT-CMTS-IP-VIDEO-MIB enables monitoring of IP video session parameters and operational constants on Arris C4 Cable Modem Termination Systems (CMTS). It provides access to specific metrics governing video stream delivery, including session states, bandwidth allocation, and protocol-specific constants required for managing hybrid fiber-coaxial (HFC) video services.
Imported Objects
Objects
28 total| Object Name |
|---|
cadCmtsIpVideoMibArris C4 system IP video parameters and constants MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.125.1 |
IMPORTSArris C4 system IP video parameters and constants Unknown .1.3.6.1.4.1.4998.1.1.125.1 |
cadSysIpVideoCfg OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.125.1.1 |
cadSysIpVideoAttributeMaskThis Attribute Mask provides a mechanism for the MSO to tell the
C4 CMTS which attribute bit(s) indicate a type of IP Video for the
purposes of monitoring. Only the least significant 16 bits of this mask
(the ones numbered 16-31) can be non-zero.rw AttributeMask (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.125.1.1.1 |
cadSysIpVideoVodThresholdThis threshold timer parameter sets the watermark against which
all IP Video VOD setups will be measured. When a setup exceeds
this parameter, then a counter is pegged.
For the purpose of this threshold, reception of the request message
(Gate-Set in PCMM) begins the setup time and completion of all
necessary protocol exchanges at both the CM and network side
stops the timer.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.1.2 |
cadSysIpVideoLinearThresholdThis threshold timer parameter sets the watermark against which
all IP Video Linear setups will be measured. When a setup exceeds
this parameter, then a counter is pegged.
For the purpose of this threshold, reception of the request message
(Gate-Set in PCMM) begins the setup time and completion of all
necessary protocol exchanges at both the CM and network side
stops the timer.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.1.3 |
cadSysIpVideoInterDbcDelayTimerThis object specifies the time the C4 will wait after receiving
a DBC-RSP from a single modem before the C4 launches the next DBC-REQ
to that same modem.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.1.4 |
cadSysIpVideoMulticastControlledIndicates whether IP Multicast is subject to Admission Control.
A value of true(1) indicates that all IP Multicast service flows
are subjected to a CAC check.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.125.1.1.5 |
cadSysIpVideoMulticastAllowedUsageMaximum percentage of downstream resources that may be admitted for use by
Multicast services. Unlike other similar parameters in the cadPCMibBase section, this
parameter is the actual limiting MIB parameter to be used across all downstream
channels and is not just the default value for other MIB parameters.
This value at all times must be less than or equal to 100% minus all default CAC
downstream channel parameters that reserve resources for other applications (including,
but not necessarily limited to, emergency and normal voice).rw INTEGER .1.3.6.1.4.1.4998.1.1.125.1.1.6 |
cadIpVideoMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.125.1.3 |
cadIPVideoMonitorDropsTableA circular table of historic drop counts for the downstream channels which
transport IP Video streams within a DS-SG. SEQUENCE OF CadIpVideoMonitorDropsEntry .1.3.6.1.4.1.4998.1.1.125.1.3.1 |
cadIpVideoMonitorDropsEntryThe drop counts for the downstream IP Video channels associated with a
connector.
The cadIpVideoMonitorCardId key is for the card that contains the connector.
The cadIpVideoMonitorPortConnectorId indicates which downstream port the counts are for.
The cadIpVideoMonitorCurTimeIdx is a sequence number. CadIpVideoMonitorDropsEntry .1.3.6.1.4.1.4998.1.1.125.1.3.1.1 |
cadIpVideoMonitorCurTimeIdxA unique index to identify a cadIpVideoMonitorDropsEntry. Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.1 |
cadIpVideoMonitorMulticastDropsThis object represents the total number of multicast packets dropped for DOCSIS
IP video channels in the downstream service group over a one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.2 |
cadIpVideoMonitorUnicastDropsThis object represents the total number of multicast packets dropped for DOCSIS
IP video channels in the downstream service group over a one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.3 |
cadIpVideoMonitorDropsSuspectFlagThis object indicates that the rest of the data in this row is suspected to not
correctly reflect the counts for the one-hour monitoring period. This condition
might have been caused by any scenario which might have resulted in errant
statistics (for example, a CAM failover).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.4 |
cadIpVideoMonitorCreateTimeThis object indicates the time when the row is created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.5 |
cadIpVideoMonitorCardIdThe unique id of this card within the shelf. CardId (CADANT-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.6 |
cadIpVideoMonitorPortConnectorIdFor a DOCSIS or EQAM type port, this is the rear PIC connector.rw PortId (CADANT-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.1.1.7 |
cadIpVideoMonitorDsChlTableA circular table of historic drop counts for the downstream channels which
transport IP Video streams within a DS-SG. SEQUENCE OF CadIpVideoMonitorDsChlEntry .1.3.6.1.4.1.4998.1.1.125.1.3.2 |
cadIpVideoMonitorDsChlEntryThe drop counts for a DS-SG.
The ifIndex key is for the downstream channel that carries IP Video service.
The cadIpVideoMonitorDsChlCurTimeIdx is a sequence number. CadIpVideoMonitorDsChlEntry .1.3.6.1.4.1.4998.1.1.125.1.3.2.1 |
cadIpVideoMonitorDsChlCurTimeIdxA unique index to identify a cadIpVideoMonitorDsChlEntry. Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.1 |
cadIpVideoMonitorMcastPktsThis object represents the total number of multicast IP Video packets
transmitted for DOCSIS IP video channels in the downstream service group over a
one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.2 |
cadIpVideoMonitorMcastFlowsThis object represents the total number of multicast IP Video flows created
over a one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.3 |
cadIpVideoMonitorUcastPktsThis object represents the total number of unicast IP Video packets
transmitted for DOCSIS IP video channels in the downstream service group over a
one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.5 |
cadIpVideoMonitorUcastFlowsThis object represents the total number of unicast IP Video flows created
over a one hour period.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.7 |
cadIpVideoMonitorDsChlSuspectFlagThis object indicates that the rest of the data in this row is suspected to not
correctly reflect the counts for the one-hour monitoring period. This condition
might have been caused by any scenario which might have resulted in errant
statistics (for example, a CAM failover).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.9 |
cadIpVideoMonitorDsChlCreateTimeThis object incicates when the row is created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.125.1.3.2.1.10 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.