CABH-PS-DEV-MIB
AI MIB Summary
The CABH-PS-DEV-MIB manages configuration parameters and behavioral attributes for the Portal Services logical element within CableHome-compliant Residential Gateways, primarily facilitating the download of PS device settings.
This MIB module supplies the basic management objects for the Portal Services logical element of a CableHome compliant Residential Gateway device. The PS device parameters describe general PS Device attributes and behavior characteristics. Most the PS Device MIB is needed for configuration download.
Main OID:
cabhPsDevMib.1.3.6.1.4.1.4491.2.4.1
138
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
138 total| Object Name |
|---|
cabhPsDevMibThis MIB module supplies the basic management objects for
the Portal Services logical element of a CableHome
compliant Residential Gateway device. The PS device
parameters describe general PS Device attributes and
behavior characteristics.
Most the PS Device MIB is needed for configuration
download. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.4.1 |
cabhPsDevMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1 |
cabhPsDevBase OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.1 |
cabhPsDevDateTimeThe date and time, with optional timezone information.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.1.1 |
cabhPsDevResetNowSetting this object to true(1) causes the stand-alone or
embedded PS device to reboot. Device code initializes as if
starting from a power-on reset. The CMP ensures that MIB
object values persist as specified in Appendix I of the
CableHome specification. Reading this object always
returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.1.2 |
cabhPsDevSerialNumberThe manufacturer's serial number for this PS. This
parameter is manufacturer provided and is stored in
non-volatile memory.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.1.3 |
cabhPsDevHardwareVersionThe manufacturer's hardware version for this PS. This
parameter is manufacturer provided and is stored in
non-volatile memory.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.1.4 |
cabhPsDevWanManMacAddressThe PS WAN-Man MAC address. This is the PS hardware
address to be used by the CDC to uniquely identify
the PS to the cable data network DHCP server for
the acquisition of an IP address to be used for
management messaging between the cable network
NMS and the CMP.ro PhysAddress .1.3.6.1.4.1.4491.2.4.1.1.1.5 |
cabhPsDevWanDataMacAddressThe PS WAN-Data MAC address. The PS could have multiple
WAN-Data Interfaces, which share the same hardware address.
The client identifiers will be unique so that each may be
assigned a different, unique IP address.ro PhysAddress .1.3.6.1.4.1.4491.2.4.1.1.1.6 |
cabhPsDevTypeIdentifierThis is a copy of the device type identifier used in the
DHCP option 60 exchanged between the PS and the DHCP
server.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.4.1.1.1.7 |
cabhPsDevSetToFactorySetting this object to true(1) sets all PsDev MIB objects
to the factory default values. Reading this object always
returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.1.8 |
cabhPsDevWanManClientIdThis is the client ID used for WAN-MAN DHCP requests.
The default value is the 6 byte MAC address.rwdeprecated OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.1.9 |
cabhPsDevTodSyncStatusThis object indicates whether the PS was able to
successfully synchronize with the Time of Day (ToD) Server
in the cable network. The PS sets this object to true(1) if
the PS successfully synchronizes its time with the ToD
server. The PS sets this object to false(2) if the PS does
not successfully synchronize with the ToD server.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.1.10 |
cabhPsDevProvModeThis object indicates the provisioning mode in which the
PS is operating. If the PS is operating in DHCP
Provisioning Mode as described in the CableHome
specification, the PS sets this object to dhcpmode(1).
If the PS is operating in SNMP Provisioning Mode, the PS
sets this object to snmpmode(2). If the PS is not
configured to operate in either dhcpmode or snmpmode
it will fall back to Dormant CableHome Mode and set
the value of cabhPsDevProvMode to dormantCHmode(3).ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.1.11 |
cabhPsDevLastSetToFactoryThe value of sysUpTime when cabhPsDevSetToFactory was
last set to true. Zero if never reset.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.1.12 |
cabhPsDevTrapControlThe object is used to enable PS notifications.
From left to right, the set bit indicates
the corresponding PS notification is enabled.
For example, if the first bit is set, then
cabhPsDevInitTLVUnknownTrap is enabled.
If the bit is zero, the trap is disabled.rw Bits .1.3.6.1.4.1.4491.2.4.1.1.1.13 |
cabhPsDevProv OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.2 |
cabhPsDevProvisioningTimerThis object enables the user to set the duration of the
provisioning timeout timer. The value is in minutes.
Setting the timer to 0 disables it. The default value
for the timer is 5.rw INTEGER .1.3.6.1.4.1.4491.2.4.1.1.2.1 |
cabhPsDevProvConfigFileThe URL of the TFTP host for downloading provisioning and
configuration parameters to this device. Returns NULL if
the server address is unknown.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.2.2 |
cabhPsDevProvConfigHashHash of the contents of the PS config file, which is
calculated by the NMS and sent to the PS. For the SHA-1
authentication algorithm the hash length is 160 bits. This
hash value is encoded in binary format.rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.2.3 |
cabhPsDevProvConfigFileSizeSize of the configuration file.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.4491.2.4.1.1.2.4 |
cabhPsDevProvConfigFileStatusThis object indicates the current status of the
configuration file download process. It is provided to
indicate to the management entity that the PS will reject
PS Configuration File triggers (set request to
cabhPsDevProvConfigFile) when busy.ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.2.5 |
cabhPsDevProvConfigTLVProcessedNumber of TLVs processed in config file.ro INTEGER .1.3.6.1.4.1.4491.2.4.1.1.2.6 |
cabhPsDevProvConfigTLVRejectedNumber of TLVs rejected in config file.ro INTEGER .1.3.6.1.4.1.4491.2.4.1.1.2.7 |
cabhPsDevProvSolicitedKeyTimeoutThis timeout applies only when the Provisioning Server
initiated key management (with a Wake Up message) for
SNMPv3. It is the period during which the PS will save
a number (inside the sequence number field) from the sent
out AP Request and wait for the matching AP Reply from the
Provisioning Server.rw Integer32 .1.3.6.1.4.1.4491.2.4.1.1.2.8 |
cabhPsDevProvStateThis object indicates the completion state of the
initialization process. Pass or Fail states occur after
completion of the initialization flow. InProgress occurs
from PS initialization start to PS initialization end.ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.2.9 |
cabhPsDevProvAuthStateThis object indicates the authentication state of the
configuration file.ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.2.10 |
cabhPsDevProvCorrelationIdRandom value generated by the PS for use in registration
authorization. It is for use only in the PS initialization
messages and for PS configuration file download. This value
appears in both cabhPsDevProvisioningStatus and
cabhPsDevProvisioningEnrollmentReport informs to verify the
instance of loading the configuration file.rodeprecated Integer32 .1.3.6.1.4.1.4491.2.4.1.1.2.11 |
cabhPsDevTimeServerAddrTypeThe IP address type of the Time server (RFC-868).
IP version 4 is typically used.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.2.12 |
cabhPsDevTimeServerAddrThe IP address of the Time server (RFC-868). Returns
0.0.0.0 if the time server IP address is unknown.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.2.13 |
cabhPsDevAttrib OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.3 |
cabhPsDevPsAttrib OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.3.1 |
cabhPsDevPsDeviceTypeThe type of device, as defined in the CableHome
specifications (Residential Gateway Device or CableHome
Host Device), that implements this OID.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.1.1 |
cabhPsDevPsManufacturerUrlUniversal Resource Locator to the Residential Gateway
device manufacturer's web site.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.1.3 |
cabhPsDevPsModelUrlUniversal Resource Locator to the web site describing this
CableHome compliant residential gateway device.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.1.7 |
cabhPsDevPsModelUpcUniversal Product Code of the CableHome compliant
residential gateway device.ro SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.1.8 |
cabhPsDevBpAttrib OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.3.2 |
cabhPsDevBpProfileTableThis table contains the information for the CableHome Host
Device Profiles. Attributes of a device make up a Device
Profile.obsolete SEQUENCE OF CabhPsDevBpProfileEntry .1.3.6.1.4.1.4491.2.4.1.1.3.2.1 |
cabhPsDevBpProfileEntryThe table that describes the CableHome Host Device
Profile.obsolete CabhPsDevBpProfileEntry .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1 |
cabhPsDevBpIndexInteger index into the CableHome Host Device Profile
Table.obsolete INTEGER .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.1 |
cabhPsDevBpDeviceTypeThe type of device, as defined by the CableHome
specifications (CableHome Residential Gateway or CableHome
Host Device), that passed the Device Profile whose
information is made available through this table row.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.2 |
cabhPsDevBpManufacturerThe name of the CableHome Host Device's manufacturer.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.3 |
cabhPsDevBpManufacturerUrlUniversal Resource Locator to the CableHome Host device
manufacturer's web site.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.4 |
cabhPsDevBpSerialNumberThe serial number assigned by the manufacturer for this
CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.5 |
cabhPsDevBpHardwareVersionThe hardware version number assigned by the manufacturer
for this CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.6 |
cabhPsDevBpHardwareOptionsThe hardware options implemented on this CableHome Host
Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.7 |
cabhPsDevBpModelNameThe model name assigned by the manufacturer for this
CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.8 |
cabhPsDevBpModelNumberThe model number assigned by the manufacturer for this
CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.9 |
cabhPsDevBpModelUrlThe Universal Resource Locator to the web site describing
this CableHome Host Device model.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.10 |
cabhPsDevBpModelUpcUniversal Product Code of the CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.11 |
cabhPsDevBpModelSoftwareOsSoftware operating system implemented on the CableHome
Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.12 |
cabhPsDevBpModelSoftwareVersionVersion of the operating system implemented on the
CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.13 |
cabhPsDevBpLanInterfaceTypeThe ifType for the LAN Interface implemented on the
CableHome Host Device.roobsolete IANAifType (IANAifType-MIB) .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.14 |
cabhPsDevBpNumberInterfacePrioritiesNumber of QoS priorities supported by the LAN technology
(Data Link Layer) implemented in the CableHome Host
Device.roobsolete INTEGER .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.15 |
cabhPsDevBpPhysicalLocationPhysical location of the CableHome Host Device.roobsolete SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.16 |
cabhPsDevBpPhysicalAddressThe CableHome Host Device's hardware address.roobsolete PhysAddress .1.3.6.1.4.1.4491.2.4.1.1.3.2.1.1.17 |
cabhPsDevStats OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.4 |
cabhPsDevLanIpTrafficCountersResetSetting this object to clearCounters(1) resets all the
traffic statistic counter entries to zero in the
cabhPsDevLanIpTrafficTable. Setting this object to
clearTable(2) removes all entries in the
cabhPsDevLanIpTrafficTable. Reading this object always
returns clearCounters(1).rw Enumeration .1.3.6.1.4.1.4491.2.4.1.1.4.1 |
cabhPsDevLanIpTrafficCountersLastResetThe value of sysUpTime when
cabhPsDevLanIpTrafficCountersReset was last written to.
Zero if never written to.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.4.2 |
cabhPsDevLanIpTrafficEnabledSetting this object to true(1) turns on the IP traffic
counters. Setting this object false(2) turns off the IP
traffic counters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.4.3 |
cabhPsDevLanIpTrafficTableThis table contains IP-layer Traffic Statistics for all
LAN IP Devices connected to the PS. SEQUENCE OF CabhPsDevLanIpTrafficEntry .1.3.6.1.4.1.4491.2.4.1.1.4.4 |
cabhPsDevLanIpTrafficEntryList of Traffic Statistics for LAN IP Devices. CabhPsDevLanIpTrafficEntry .1.3.6.1.4.1.4491.2.4.1.1.4.4.1 |
cabhPsDevLanIpTrafficIndexThe Index into the LAN IP Traffic Statistics Table. INTEGER .1.3.6.1.4.1.4491.2.4.1.1.4.4.1.1 |
cabhPsDevLanIpTrafficInetAddressTypeThe type of IP address assigned to the LAN IP device to
which the statistics in this table row apply. IP version
4 is typically used.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.4.4.1.2 |
cabhPsDevLanIpTrafficInetAddressThe IP address of the LAN IP device to which the
statistics in this table row apply. An IPv4 IP
address is typically used.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.4.4.1.3 |
cabhPsDevLanIpTrafficInOctetsThe total number of octets the PS forwarded from the WAN
interfaces to the LAN IP device associated with the value
of cabhPsDevLanIpTrafficInetAddress. This counter object
does not include LAN-to-LAN traffic.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.4491.2.4.1.1.4.4.1.4 |
cabhPsDevLanIpTrafficOutOctetsThe total number of octets the PS forwarded from the LAN
IP device associated with the value of
cabhPsDevLanIpTrafficInetAddress, to the WAN interfaces.
This counter object does not include LAN-to-LAN traffic.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.4491.2.4.1.1.4.4.1.5 |
cabhPsDevAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.5 |
cabhPsDevAccessControlEnableThis object specifies the interface type(s) for which the
PSDev Access Control Table access rules are enabled. If a
bit field is set to 1, the PS MUST only forward traffic
received through that interface type if the source physical
address is an entry in the cabhPsDevAccessControlTable. If
a bit field is set to 1, the PS MUST only forward traffic
destined to a device on that interface type if the
destination physical address is an entry in the
cabhPsDevAccessControlTable. If the bit field for an
interface type is not set, i.e., if it is equal to 0, the
PS MUST NOT apply forwarding restrictions for that
interface type based on the Access Control Table. The PS
MUST implement cabhPsDevAccessControlEnable for bit 1
(wireless LAN) and for bit 3 (HomePlug). If the PS does not
implement cabhPsDevAccessControlEnable for any of the other
defined bits, the PS MUST return inconsistent value error,
and not allow the bit to be set, if an attempt is made to
set a bit that is not implemented.
If the PS implements a HomePNA interface and implements the
PSDev Access Control Table enable functionality for the
HomePNA interface, then if bit 0 is set, the PS MUST apply
PSDev Access Control Table access rules to any PS interface
of IANAifType 220 (Home Phoneline Networking Alliance). If
the PS does not implement PSDev Access Control Table enable
functionality for the HomePNA interface, and an attempt is
made to set bit 0 to value '1', the PS MUST return
'Inconsistent Value' error and MUST NOT set bit 0 to value
'1'.
If bit 1 (ieee80211) is set, the PS MUST apply PSDev
Access Control Table access rules to any PS interface of
IANAifType 71 (radio spread spectrum).
If the PS implements an IEEE 802.3/CSMA-CD interface and
implements the PSDev Access Control Table enable
functionality for the IEEE 802.3/CSMA-CD interface, then
if bit 2 is set, the PS MUST apply PSDev Access Control
Table access rules to any PS interface of IANAifType 6
(ethernetCsmacd). If the PS does not implement PSDev
Access Control Table enable functionality for a IEEE
802.3/CSMA-CD interface, and an attempt is made to set
bit 2 to value '1', the PS MUST return 'Inconsistent
Value' error and MUST NOT set bit 2 to value '1'.
If bit 3 (homeplug) is set, the PS MUST apply PSDev
Access Control Table access rules to any PS HomePlug
Powerline Alliance (HomePlug) interface as defined by
HomePlug Powerline Alliance (www.homeplug.org).
If the PS implements a USB interface and implements the
PSDev Access Control Table enable functionality for the
USB interface, then if bit 4 is set, the PS MUST apply
PSDev Access Control Table access rules to any PS
interface of IANAifType 160 (USB). If the PS does not
implement PSDev Access Control Table enable functionality
for the USB interface, and an attempt is made to set bit
4 to value '1', the PS MUST return 'Inconsistent Value'
error and MUST NOT set bit 4 to value '1'.
If the PS implements an IEEE 1394 interface and
implements the PSDev Access Control Table enable
functionality for the IEEE 1394 interface, then if bit 5
is set, the PS MUST apply PSDev Access Control Table
access rules to any PS interface of IANAifType 144
(IEEE1394 High Performance Serial Bus). If the PS does
not implement PSDev Access Control Table enable
functionality for the IEEE 1394 interface, and an attempt
is made to set bit 5 to value '1', the PS MUST return
'Inconsistent Value' error and MUST NOT set bit 5 to
value '1'.
If the PS implements a SCSI interface and implements the
PSDev Access Control Table enable functionality for the
SCSI interface, then if bit 6 is set, the PS MUST apply
PSDev Access Control Table access rules to any PS SCSI-2
or SCSI-3 interface. If the PS does not implement PSDev
Access Control Table enable functionality for the SCSI
interface, and an attempt is made to set bit 6 to value
'1', the PS MUST return 'Inconsistent Value' error and
MUST NOT set bit 6 to value '1'.
If bit 7 (other) is set, the PS MAY apply PSDev Access
Control Table filter access to any PS interface of a type
other than the types defined by bits 0 6.rw Bits .1.3.6.1.4.1.4491.2.4.1.1.5.1 |
cabhPsDevAccessControlTableThis table contains a list of the physical addresses of
LAN IP Devices to and from which the PS will forward
traffic through a LAN interface if
cabhPsDevAccessControlEnable is enabled(1) for that
interface type. SEQUENCE OF CabhPsDevAccessControlEntry .1.3.6.1.4.1.4491.2.4.1.1.5.2 |
cabhPsDevAccessControlEntryList of the physical addresses for LAN IP Devices
to and from which the PS will forward traffic when
the PSDev Access Control Table is enabled. CabhPsDevAccessControlEntry .1.3.6.1.4.1.4491.2.4.1.1.5.2.1 |
cabhPsDevAccessControlIndexInteger index into the CableHome PSDev Access Control
Table. INTEGER .1.3.6.1.4.1.4491.2.4.1.1.5.2.1.1 |
cabhPsDevAccessControlPhysAddrThe physical address of the LAN IP Device for which the PS
will forward traffic when the PSDev Access Control
Table is enabled. The PS will not forward traffic
from any LAN IP Device whose physical address is
not an entry of the PSDev Access Control Table when the
PSDev Access Control Table is enabled for the
corresponding interface.rw PhysAddress .1.3.6.1.4.1.4491.2.4.1.1.5.2.1.2 |
cabhPsDevAccessControlRowStatusThe RowStatus interlock for the creation and deletion
of a cabhPsDevAccessControlTable entry. Any writable
object in each row of the cabhPsDevAccessControlTable
can be modified at any time while the row is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.5.2.1.3 |
cabhPsDevMisc OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6 |
cabhPsDevUI OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6.1 |
cabhPsDevUILoginThis parameter specifies the value of the user login name
required for access to the CableHome compliant residential
gateway device's user interface.rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.1.1 |
cabhPsDevUIPasswordThis parameter specifies the value of the user password
required for access to the CableHome compliant residential
gateway device's user interface.rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.1.2 |
cabhPsDevUISelectionIndicates the type of Web user interface (UI)
to present to the user if Web interface is supported:
manufacturerLocal:
PS uses the vendor UI shipped with the device.
cableOperatorLocal:
PS uses a cable operator defined UI interface.
To operate properly, It should require a special code
image downloaded into the PS. By default, if no cable
operator UI is being defined, selecting this option
points to 'manufacturerLocal' selection.
cableOperatorServer:
PS redirects HTTP requests to its UI to the URL specified
in cabhPsDevUIServerUrl.
disabledUI:
PS responds to HTTP requests to its UI with an HTTP page
containing the value of
cabhPsDevUISelectionDisabledBodyText as the body tag;
or with a vendor specific message or HTTP error if that
value is null.rw Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.1.3 |
cabhPsDevUIServerUrlURL used by the Indicate the UI to present to the user.
The well formed URL is resolved by the PS by querying the
DNS servers listed in cabhCdpWanDnsServerTable.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.6.1.4 |
cabhPsDevUISelectionDisabledBodyTextDefault text for the HTTP body tag to include in the
response to UI requests when the object
cabhPsDevUISelection is set to 'disabledUI'
An example of a body tag is below:
<body>Feature currently disabled by Cable Operator</body>.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.1.1.6.1.5 |
cabhPsDev802dot11 OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6.2 |
cabhPsDev802dot11BaseTableCableHome specifics controls for 80211 wireless
interfaces. SEQUENCE OF CabhPsDev802dot11BaseEntry .1.3.6.1.4.1.4491.2.4.1.1.6.2.1 |
cabhPsDev802dot11BaseEntryAn entry in cabhPsDev802dot11BaseTable associated to a
wireless interface of IANAifType ieee80211.(71) CabhPsDev802dot11BaseEntry .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1 |
cabhPsDev802dot11BaseSetToDefaultWhen set to true(1) the PS MUST reset to default values
the Mib objects of IEEE802dot11-MIB module and others under
cabhPsDev802dot11 for this entry related IfIndex.
Reading this object always return false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1.1 |
cabhPsDev802dot11BaseLastSetToDefaultThe value of sysUpTime when
cabhPsDev802dot11MIBSetToDefault was last set to true.
Zero if never reset.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1.2 |
cabhPsDev802dot11BaseAdvertiseSSIDWhen set to false(2) the PS does not advertise the BSS
SSID in a proprietary manner. To avoid interoperability
problems and service disruption it is RECOMMENDED to set
this object always to true. This feature does not provide
any security, and does not prevent Wireless Stations to
obtain the SSID by sniffing frames from other stations in
the ESS. If the device does not support the feature of
turning on/off the SSID advertisement, this object always
reports 'true(1)' and reports the error 'wrongValue' when
set to 'false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1.3 |
cabhPsDev802dot11BasePhyCapabilitiesIndicates the PHY capabilities of the wireless interface.ro Bits .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1.4 |
cabhPsDev802dot11BasePhyOperModeIndicates the PHY mode of operation being set for the
wireless interface. Setting this object will update the
value of dot11PhyType. Accordingly (if implemented), as
well as the object dot11OperationalRateSet to the 80211
mandatory rates for dot11PhyType.
It is left to vendors the option to update the values of
PS optional dot11SupportedDataRatesTxEntry and
dot11SupportedDataRatesRxEntry tables based on the
operational mode.
In the case of selecting ieee80211bg(14), dot11PhyType
reports erp(6) and dot11OperationalRateSet should report
HRDSSS and ERP mandatory rates and in addition 54 Mbps rate
if supported by PS. e.g. : (this example assumes 54 Mbps
OFDM is supported.
HR-DSSS :
Mandatory:
1 Mbps '80'H + '01'H
2 Mbps '80'H + '02'H
5.5 Mbps '80'H + '0B'H
11 Mbps '80'H + '16'H
ERP :
Mandatory:
6 Mbps '80'H + '0C'H
12 Mbps '80'H + '18'H
24 Mbps '80'H + '30'H
(if supported) 54 Mbps '80'H + '6C'
Optional:
22 Mbps '00'H + '2C'H
33 Mbps '00'H + '42'H
18 Mbps '00'H + '24'H
36 Mbps '00'H + '48'H
48 Mbps '00'H + '60'H
Combined operational rates in :
dot11OperationalRateSet value in rate order regardless
of '80'H flag and using dots for clarity :
+ means flagged '80'H, - not flagged.
Rates Mbps: +1,+2,+5.5,+6,+11,+12,-18,-22,+24,-33,-36,-48,+54
Hex: '81.82.8B.8C.96.98. 24.2C.B0.48.42. 60.EC'H
The default value of this object is left to the vendor to
accommodate the factory defaults for the device.rw Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.2.1.1.5 |
cabhPsDev802dot11SecTableCableHome specifics controls for configuring the
security mechanisms of 80211 wireless interfaces. SEQUENCE OF CabhPsDev802dot11SecEntry .1.3.6.1.4.1.4491.2.4.1.1.6.2.2 |
cabhPsDev802dot11SecEntryAn entry in cabhPsDev802dot11SecTable associated to a
wireless interface of IANAifType ieee80211(71). CabhPsDev802dot11SecEntry .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1 |
cabhPsDev802dot11SecCapabilitiesThe PS capabilities for Authentication and encryption used
to authenticate 802.11 clients.ro Bits .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.1 |
cabhPsDev802dot11SecOperModeIndicates the Authentication and encryption mechanism to
be enabled for the users and advertised in Beacon messages.
Bits set to this object and not supported by the PS in
cabhPsDev802dot11SecCapabilities are set to '0' without
failing the SNMP set. Setting two bit that the PS does not
support in combination returns an error 'wrongValue'.
In particular:
Setting to '1' both wep64(0)and wep128(1) bits returns an
error'wrongValue'.
Setting a combination of WEP bits (wep64(0) or wep128(1))
and wpaPSK bit returns is not a mandatory requirement,
therefore an error 'wrongValue' may be reported.
Setting any bit to '1' must not affect the value of object
dot11PrivacyInvoked.
If dot11PrivacyInvoked is set to 'false', the 80211 WEP
security mechanism is disabled (see dot11PrivacyInvoked
description) and the value of this object is not used.
Setting the wpaPSK(2) bit to '1' indicates the usage of
WPA-PSK TKIP.
Note that to enable the PSK security mechanism, the value
of cabhPsDev802dot11SecWPAPreSharedKey must be a non-zero
length string.rw Bits .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2 |
cabhPsDev802dot11SecPassPhraseToWEPKeyThe Password used for PS to derive WEP encryption keys.
After a successful set, the values of
dot11WEPDefaultKeyValue are populated as described below:
For wep64:
If cabhPsDev802dot11SecOperMode wep64 bit is set to '1'
This object value (x) is used as a generator of a 4 octet
seed.
seed[i%4] = XOR(seed[i%4],x[i]); i from 1 to len(x) -1
The values of the four dot11WEPDefaultKeyValue are
calculated as indicated below :
loop j 1..4
loop k 0..4
seed = seed * (((26*8+1)*256-1)*4+1) + 2531011
The value is always truncated at 32 bits.
OCTETk = (seed >> 16 )& 0xFF -lowest octet-
end loop
dot11WEPDefaultKeyValue(j) = OCTET0,OCTET1, ... OCTET4
end loop
Note that seed value is constantly re-computed when
calculating each octet of each default WEP key.
For wep128:
If cabhPsDev802dot11SecOperMode wep128 bit is set to '1'
This object value (x) fills a 64 octet buffer y :
y = x,x,x...up to 64 octets.
Calculate the 128-bit MD5 digest of y
the values of all dot11WEPDefaultKeyValue (1..4)
are calculated by truncating the first first 13 octets
of MD5y.
dot11WEPDefaultKeyValue = MD5y0,MD5y1, .. MD5y12
This object value is normally read by issuing SNMP
request PDUs. This object can be cleared with an SNMP
SET to an empty string Value and the PS MUST not update
the type of keys being set to '1' in
cabhPsDev802dot11SecOperMode.
If cabhPsDev802dot11SecUsePassPhraseToKeyAlg is set to
false(2), the behavior of a SET to this object depends
on the bits set for cabhPsDev802dot11SecOperMode as
follows:
If cabhPsDev802dot11SecOperMode bit wep64 is set to '1'
and this object value length is 5 octets, the MIB object
dot11WEPDefaultKeyValue.1 (WEP key 0) is populated with
this object value, otherwise an error 'inconsistentValue'
is reported.
If cabhPsDev802dot11SecOperMode bit wep128 is set to '1'
and this object value length is 13 octets, the MIB object
dot11WEPDefaultKeyValue.1 (WEP key 0) is populated with
this object value, otherwise an error 'inconsistentValue'
is reported.
Vector examples for wep64 and wep128 key derivation:
Note:
% refers to the module operation (reminder of the
quotient of i and 4); XOR is the OR exclusive boolean
operation.
For wep64:
passphrase:
'ABCD4321' ( hex code 0x41.42.43.44.34.33.32.31 )
First loop: (octets 0..3)
XOR (0x00,A) -> XOR(0x00,0x41) -> 0x41
XOR (0x00,B) -> XOR(0x00,0x42) -> 0x42
XOR (0x00,C) -> XOR(0x00,0x43) -> 0x43
XOR (0x00,D) -> XOR(0x00,0x44) -> 0x44
Second loop: (octets 4..7)
XOR (A,4) -> XOR(0x41,0x34) -> 0x75
XOR (B,3) -> XOR(0x42,0x33) -> 0x71
XOR (C,2) -> XOR(0x43,0x32) -> 0x71
XOR (D,1) -> XOR(0x44,0x31) -> 0x75
initial seed 0x75717175 -> 1970368885
DefaultKeys calculation
key1
seed : 0x16545E64 -> 2nd MSB byte : 0x54
seed : 0x41681397 -> 2nd MSB byte : 0x68
seed : 0x1BE77FFE -> 2nd MSB byte : 0xE7
seed : 0xAA6996C9 -> 2nd MSB byte : 0x69
seed : 0xD1523E68 -> 2nd MSB byte : 0x52
dot11WEPDefaultKeyValue.1 = 0x5468E76952
key2
seed : 0x1FFB838B -> 2nd MSB byte : 0xFb
seed : 0xF9C60022 -> 2nd MSB byte : 0xC6
seed : 0xAB43A65D -> 2nd MSB byte : 0x43
seed : 0xE9A35FAC -> 2nd MSB byte : 0xA3
seed : 0xE7AA2FBF -> 2nd MSB byte : 0xAA
dot11WEPDefaultKeyValue.2 = 0xFBC643A3AA
key3
seed : 0x6D13CB86 -> 2nd MSB byte : 0x13
seed : 0x5D8CD431 -> 2nd MSB byte : 0x8C
seed : 0xCC702630 -> 2nd MSB byte : 0x70
seed : 0xD78AEC33 -> 2nd MSB byte : 0x8A
seed : 0x24DC662A -> 2nd MSB byte : 0xDC
dot11WEPDefaultKeyValue.3 = 0x138C708ADC
key4
seed : 0x4F329445 -> 2nd MSB byte : 0x32
seed : 0x3EC035F4 -> 2nd MSB byte : 0xC0
seed : 0xF416CCE7 -> 2nd MSB byte : 0x16
seed : 0x9904940E -> 2nd MSB byte : 0x04
seed : 0x28969A99 -> 2nd MSB byte : 0x96
dot11WEPDefaultKeyValue.4 = 0x32C0160496
For wep128:
passphrase:
'ABCD4321' ( hex code 0x41.42.43.44.34.33.32.31 )
128-bit MD-5 digest 0xFECBACF05B42F7A138A5F3928E
dot11WEPDefaultKeyValue.1..4 = 0xFECBACF05B42F7A138A5rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.3 |
cabhPsDev802dot11SecUsePassPhraseToWEPKeyAlgWhen this object value is true(1) the WEP Pass Phrase to
key mechanism described in
cabhPsDev802dot11SecPassPhraseToWEPKey applies. When this
object is set to false(2) the Pass Phrase to WEP Key
mechanism is ignored and the password is used as WEP key
to populate the MIB object keydot11WEPDefaultKeyValue
object as indicated in
cabhPsDev802dot11SecPassPhraseToWEPKey description.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.4 |
cabhPsDev802dot11SecPSKPassPhraseToKeyThe Password used for PS to derive WPA PSK encryption key.
After a successful set, the values of
cabhPsDev802dot11SecWPAPreSharedKey is updated as described
below:
For wpaPSK:
If cabhPsDev802dot11SecOperMode wpaPSK bit is set to '1'
the value of cabhPsDev802dot11SecWPAPreSharedKey is updated
with the Password Base Key Derivation Function from the
Password-based Cryptographic Specification PKCS #5 v2.0
RFC 2898 (PBKDF2) with the following specific parameters:
PSK = PBKDF2(PassPhrase, ssid, ssidLength, 4096, 256)
PassPhrase is the value of this object
ssid is the PS SSID value used as the function salt
ssidLength is the number of octets of ssid
the iterations count is 4096 and the key generation length
is 256 bits (32 octets).
This object value is normally read by issuing SNMP request
PDUs. This object can be cleared with an SNMP SET to an
empty string Value and the PS MUST not update the type of
keys being set to '1' in cabhPsDev802dot11SecOperMode.
Vector examples for wpaPSK:
for wpaPSK:
passphrase:
'ABCD4321' ( hex code 0x41.42.43.44.34.33.32.31 )
SSID: 'ABCD4321' ( hex code 0x41.42.43.44.34.33.32.31 )
256 bit PBKDF2('ABCD4321', 'ABCD4321', 8, 4096, 32)
cabhPsDev802dot11SecWPAPreSharedKey =
0x7C199CF2FEF9AF206C8EE0E9703920C2
3517068B3F96B011E0F975C9131BDB58rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.5 |
cabhPsDev802dot11SecWPAPreSharedKeyThe Pre-shared key used for the PS when the bit 'wpaPSK'
is set to '1'. This object can be set directly or derived
from the password phrase set in
cabhPsDev802dot11SecPSKPassPhraseToKey. This object is
meaningful when the bit wpaPSK is set to '1'.
If the value of this object is the zero-length string, the
PS must not activate the PSK security mechanism.rw OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.6 |
cabhPsDev802dot11SecWPARekeyTimeTime interval to initiate WPA Group Keys (GTK) updates.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.7 |
cabhPsDev802dot11SecControlThe control for the indexed 80211 device configuration.
All changes to the cabhPsDev802dot11SecEntry MIB objects
are reflected when reading the value of the MIB objects;
however, those changes are NOT applied to the running
configuration of the indexed 80211 device until they are
successfully committed via use of the
cabhPsDev802dot11SecControl object.
If changes are made to the cabhPsDev802dot11SecEntry MIB
objects which are not yet successfully committed to the
indexed 80211 device, the cabhPsDev802dot11SecControl
object can be used to rollback all changes to the last
valid 80211 device configuration and discard all
intermediate changes.
restoreConfig - Setting cabhPsDev802dot11SecControl to this
value will cause any changes to the
cabhPsDev802dot11SecEntry objects not yet committed be
reset to the values from the current running
configuration of the indexed 80211 device.
commitConfig - Setting cabhPsDev802dot11SecControl to this
value will cause the indexed 80211 device to validate and
apply the valid cabhPsDev802dot11SecEntry MIB settings to
its running configuration. The
cabhPsDev802dot11SecCommitStatus object will detail the
status of this operation.rw Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.8 |
cabhPsDev802dot11SecCommitStatusIndicates the status of committing the current
cabhPsDev802dot11SecEntry MIB object values to the running
configuration of the indexed 80211 device.
commitSucceeded - indicates the current
cabhPsDev802dot11SecEntry MIB object values are valid and
have been successfully committed to the running
configuration of the indexed 80211 device.
commitNeeded - indicates that the value of one or more
objects in cabhPsDev802dot11SecEntry MIB group have been
changed but not yet committed to the running configuration
of the indexed 80211 device.
commitFailed - indicates the PS was unable to commit the
cabhPsDev802dot11SecEntry MIB object values to the running
configuration of the indexed 80211 device due to conflicts
in those values.ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.9 |
cabhPsDevUpnp OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6.3 |
cabhPsDevUpnpBase OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6.3.1 |
cabhPsDevUpnpEnabledSetting this object to false(1) disable PS UPnP
services and UPnP MIB objects related functionality.
When this object reports 'false' any set to
UPnP read-write or read-create objects returns error
'InconsistentValue'. Transitions of this object from
'true' to 'false' and viceversa does not alter the content
of persistent MIB objects and may clear dynamically UPnP
created entries. This object value persists upon system
reinitialization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.3.1.1 |
cabhPsDevUpnpCommands OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.1.6.3.2 |
cabhPsDevUpnpCommandIpTypeThe type of InetAddress for cabhPsDevUpnpCommandIp.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.1 |
cabhPsDevUpnpCommandIpThe IP address Of the device for which the UPnP
information is being requested. This may be a an IPv4 or
IPv6 prefix. When quering specific information about the
PS itself the PS router IP address 192.168.0.1
should be specified .rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.2 |
cabhPsDevUpnpCommandThe type of information to be retrieved from the Upnp
Devices in the LAN side and stored in
cabhPsDevUpnpInfoTable.
The following selections are supported:
- discoveryInfo :
PS retrieve the Discovery information of UPnP devices.
If the Ip address specified in
cabhPsDevUpnpCommandIp is 255.255.255.255
the PS executes an M-search command and then
retrieve the discovery information of the
responding devices. The data stored in
cabhPsDevUpnpInfoTable also contain UPnP
discovery data of the PS itself.
- qosDeviceCapabilities:
This command is executed for unicast address only
and will trigger the PS to retrieve the QOS device
information pertain QOS capabilities.
- qosDeviceState:
This command is executed for unicast address only
and will trigger the PS to retrieve the QOS device
information pertain QOS Device state.rw Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.3 |
cabhPsDevUpnpCommandUpdateIf set to 'true' triggers the execution of the command
indicated in cabhPsDevUpnpCommand for the host(s) in
cabhPsDevUpnpCommandIp. Setting to true this object will
return error 'wrongValie if host IP corresponds to
255.255.255.255 and cabhPsDevUpnpCommand value is not
'discoveryInfo'. Reading this value always return 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.4 |
cabhPsDevUpnpLastCommandUpdateThe sysUpTime value of the last time the object
cabhPsDevUpnpLastCommandUpdate was set to 'true'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.5 |
cabhPsDevUpnpCommandStatusThe status of cabhPsDevUpnpCommandUpdate trigger
none(1)
initial state.
inProgress(2)
the information is being acquired by the
device, PS does not change from'inProgess
to the final state (complete, failed)
until the execution has finished.
complete(3) The overall execution is finished with
no error conditions..
failed(4).
The UPnP Device has experienced a timeout. In the
case of multiple devices query
(cabhPsDevUpnpCommand set to 'discoveryInfo')
The failed devices are stored with content information
empty. At system initialization this object returns
'none'.ro Enumeration .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.6 |
cabhPsDevUpnpInfoTableThis table contains QOS related information of LAN
UPnP devices or thePS itself. SEQUENCE OF CabhPsDevUpnpInfoEntry .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7 |
cabhPsDevUpnpInfoEntryThe Indexes for this entries
Entries are created after setting to 'true' the
value of cabhPsDevUpnpCommand. CabhPsDevUpnpInfoEntry .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7.1 |
cabhPsDevUpnpInfoIpTypeThe type of InetAddress for cabhPsDevUpnpInfoIp. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7.1.1 |
cabhPsDevUpnpInfoIpThe IP address Of the device for which the UPnP
information is being stored. This may be a DNS name
(LAN Host name), an IPv4 or IPv6 prefix. Information
pertaining to the PS itself is indicated by the PS
well-known LAN IP address interface 192.168.0.1. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7.1.2 |
cabhPsDevUpnpInfoXmlFragmentIndexThe index of the sequence of entries of
cabhPsDevUpnpInfoXmlFragment for an specific
cabhPsDevUpnpInfoIp IP address starting with '1'. Unsigned32 .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7.1.3 |
cabhPsDevUpnpInfoXmlFragmentThe UPnP Device information being requested by
cabhPsDevUpnpCommand for the IP addresses specified
in cabhPsDevUpnpInfoIp for LAN host(s). If the
information is greater than 400 bytes
cabhPsDevUpnpInfoXmlFragmentIndex indicates the
sequence of the consecutive portions per host identified in
the table.ro OCTET STRING .1.3.6.1.4.1.4491.2.4.1.1.6.3.2.7.1.4 |
cabhPsNotification OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.2 |
cabhPsDevNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.2.0 |
cabhPsDevInitTLVUnknownTrapEvent due to detection of unknown TLV during the TLV
parsing process. The values of docsDevEvLevel, docsDevId,
and docsDevEvText are from the entry which logs this event
in the docsDevEventTable. The value of
cabhPsDevWanManMacAddress indicates the WAN-Man MAC address
of the PS. This part of the information is uniform across
all PS Traps. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.1 |
cabhPsDevInitTrapThis inform is issued to confirm the successful completion
of the CableHome provisioning process. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.2 |
cabhPsDevInitRetryTrapAn event to report a failure happened during the
initialization process and was detected in the PS. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.3 |
cabhPsDevDHCPFailTrapAn event to report the failure of a DHCP server. The
value of cabhCdpServerDhcpAddressis the IP address of
the DHCP server. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.4 |
cabhPsDevSwUpgradeInitTrapAn event to report a software upgrade initiated event.
The values of docsDevSwFilename, and docsDevSwServer
indicate the software image name and the IP address of the
server from which the image was downloaded. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.5 |
cabhPsDevSwUpgradeFailTrapAn event to report the failure of a software upgrade
attempt. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name and the IP
address of the server from which the image was downloaded. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.6 |
cabhPsDevSwUpgradeSuccessTrapAn event to report the Software upgrade success event.
The values of docsDevSwFilename, and docsDevSwServer
indicate the software image name and the IP address of the
server from which the image was downloaded. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.7 |
cabhPsDevSwUpgradeCVCFailTrapAn event to report the failure of the verification of code
file happened during a secure software upgrade attempt. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.8 |
cabhPsDevTODFailTrapAn event to report the failure of a time of day server.
The value of cabhPsDevTimeServerAddr indicates the server
IP address. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.9 |
cabhPsDevCdpWanDataIpTrapAn event to report the failure of PS to obtain all
needed WAN-Data Ip Addresses.
cabhCdpWanDataAddrClientId indicates the ClientId for
which the failure occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.10 |
cabhPsDevCdpThresholdTrapAn event to report that the LAN-Trans address assignment
threshold has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.11 |
cabhPsDevCspTrapTo report an event with the CableHome Security Portal. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.12 |
cabhPsDevCapTrapTo report an event with the CableHome Address Portal. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.13 |
cabhPsDevCtpTrapTo report an event with the CableHome Test Portal. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.14 |
cabhPsDevProvEnrollTrapThis notification is issued to initiate the CableHome
provisioning process for SNMP Provisioning Mode. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.15 |
cabhPsDevCdpLanIpPoolTrapAn event to report that the pool of IP addresses for LAN
clients, as defined by cabh CdpLanPoolStart and
cabhCdpLanPoolEnd, is exhausted. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.16 |
cabhPsDevUpnpMultiplePHTrapTo report that more than one active UPnP Policy Holders
have been detected.
This notification is triggered in the case the PS
has cabhPsDevUpnpEnabled true. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.4.1.2.0.17 |
cabhPsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.3 |
cabhPsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.3.1 |
cabhPsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.1.3.2 |