CABH-QOS2-MIB
AI MIB Summary
The CABH-QOS2-MIB module manages Quality of Service (QoS) policy configuration and performance monitoring for CableHome (DOCSIS) cable modems and CMTS interfaces, specifically tracking traffic class parameters, bandwidth allocation, and packet scheduling metrics.
This MIB module supplies parameters for the configuration and monitoring of CableHome QoS capabilities.
Main OID:
cabhQos2Mib.1.3.6.1.4.1.4491.2.4.8
54
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
cabhQos2MibThis MIB module supplies parameters for the configuration and monitoring of CableHome QoS capabilities. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.4.8 |
cabhQos2Mib2Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.0 |
cabhQos2MibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.1 |
cabhQos2Base OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.1.1 |
cabhQos2SetToFactoryWhen this object is set to true(1), the PS MUST clear all the entries in cabhQos2PolicyTable and cabhQos2TrafficClassTable. Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.8.1.1.1 |
cabhQos2LastSetToFactoryThe value of sysUpTime when cabhQos2SetToFactory was last set to true. Zero if never reset.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.8.1.1.2 |
cabhQos2PsIfAttributes OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.1.2 |
cabhQos2PsIfAttribTableThis table contains interface attributes. It includes the number of media access priorities and number of queues associated with each PS interface in the Residential Gateway. SEQUENCE OF CabhQos2PsIfAttribEntry .1.3.6.1.4.1.4491.2.4.8.1.2.1 |
cabhQos2PsIfAttribEntryNumber of media access priorities and number of queues for each PS interface in the Residential Gateway. PS does not need to provide support for entries associated with Aggregated LAN interfaces (ifIndex 255 and 254). The PS WAN interfaces are assigned as ifIndex 1 for Wan Management and ifIndex 2 for Wan Data; both interfaces are indicated in this table as 'WAN interface' with ifIndex 1 as the entry identifier. CabhQos2PsIfAttribEntry .1.3.6.1.4.1.4491.2.4.8.1.2.1.1 |
cabhQos2PsIfAttribNumPrioritiesThe number of media access priorities supported by this interface.ro Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.2.1.1.1 |
cabhQos2PsIfAttribNumQueuesThe number of queues associated with this interface.ro Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.2.1.1.2 |
cabhQos2PolicyHolderObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.1.3 |
cabhQos2PolicyHolderEnabledThe value true indicates that the Policy Holder entity is active and advertised in PS UPnP standard discovery mechanisms; false indicates it is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.8.1.3.1 |
cabhQos2PolicyAdmissionControlIndicates if the QoS Policy Admission Control is enabled or disabled for all the traffic requests.rw Enumeration .1.3.6.1.4.1.4491.2.4.8.1.3.2 |
cabhQos2NumActivePolicyHolderIndicates the number of active policy holders the PS have discovered in the LAN. This object includes the PS Policy Holder if active.ro Gauge32 .1.3.6.1.4.1.4491.2.4.8.1.3.3 |
cabhQos2PolicyTableThis table contains the operator and user created policies for the management of QoS for applications. PS creates non-persistent entries (of type 'upnp') for the QoS-aware applications and services discovered through UPnP actions in the user part of this table which could be converted to persistent entries by user (of type 'user' or by cable operator of type 'operatorForHomeUserOnly). SEQUENCE OF CabhQos2PolicyEntry .1.3.6.1.4.1.4491.2.4.8.1.3.4 |
cabhQos2PolicyEntryThe indices for these entries. CabhQos2PolicyEntry .1.3.6.1.4.1.4491.2.4.8.1.3.4.1 |
cabhQos2PolicyOwnerThis Index defines the policy creation owner. The entries of type 'upnp' are dynamically created by the PS for the applications, services and devices that it discovers on the LAN with UPnP QoS actions. Enumeration .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.1 |
cabhQos2PolicyOwnerRuleIdIndex for the set of rules related to an owner index. Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.2 |
cabhQos2PolicyRuleOrderThe order in which the policy rules are processed within An owner.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.3 |
cabhQos2PolicyAppDomainVendor domain name from the Vendor application name URN.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.4 |
cabhQos2PolicyAppNameText description of the application.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.5 |
cabhQos2PolicyServiceProvDomainThe service Provider Service Domain Name from the service Provider URN.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.6 |
cabhQos2PolicyServiceNameText description of the Service.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.7 |
cabhQos2PolicyPortDomainDomain name from the Port URN.rw SnmpAdminString .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.8 |
cabhQos2PolicyPortNumberWell known IP transport port of the application.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.9 |
cabhQos2PolicyIpTypeThe type of InetAddress for cabhQos2PolicySrcIp, and cabhQos2PolicyDestIp.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.10 |
cabhQos2PolicyIpProtocolThe IANA-defined IP protocol number representing the IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. '0' means no protocol is specified as matching criteria for policy determination, i.e., QoS policy is irrespective of IP protocol.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.11 |
cabhQos2PolicySrcIpThe IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.12 |
cabhQos2PolicyDestIpThe IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.13 |
cabhQos2PolicySrcPortThe value that the layer-4 source port number in the packet must have in order to match this policy entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.14 |
cabhQos2PolicyDestPortThe value that the layer-4 destination port number in the packet must have in order to match this policy entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.15 |
cabhQos2PolicyTraffImpNumThe Traffic priority being assigned to this policy. The final packet tagging is determined by 802.1D rules with the priority hierarchy order (highest to lowest priority) as defined in 802.1D-2004 table G-2: 7, 6, 5, 4, 3, 0, 2, 1. Note that traffic type '1' and '2' has lower priority than '0' (best effort).rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.16 |
cabhQos2PolicyUserImportanceThe UPnP relative value to determine the allocation or reallocation of resources to multiple streams.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.17 |
cabhQos2PolicyRowStatusThe status of this conceptual row. All writable objects in this row may be modified at any time. The PS MUST NOT allow creation of new entry or modification to an existing active entry such that the resulting entry is a duplicate entry with respect to the following MIBs in an entry: cabhQos2PolicyAppDomain, cabhQos2PolicyAppNameSnmpAdminString, cabhQos2PolicyServiceProvDomainSnmpAdminString, cabhQos2PolicyServiceName SnmpAdminString, cabhQos2PolicyPortDomain SnmpAdminString, cabhQos2PolicyPortNumber InetPortNumber, cabhQos2PolicyIpType InetAddressType, cabhQos2PolicyIpProtocol Unsigned32, cabhQos2PolicySrcIp InetAddress, cabhQos2PolicyDestIp InetAddress, cabhQos2PolicySrcPort InetPortNumber, cabhQos2PolicyDestPort InetPortNumber, The entries of type 'upnp' are not persistent while others are persistent. The user or the operator can change the 'upnp' entries and in that case the PS MUST change the entry to either 'homeUser' or 'operatorForHomeUser', respectively. The PS MUST NOT change the entries of type 'upnp' to 'operatorOnly'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.8.1.3.4.1.18 |
cabhQos2DeviceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.1.4 |
cabhQos2TrafficClassTableThis table contains the Classifiers being configured in the PS as an intermediate QOS device. For matching classifiers the PS processes entries in a sorted manner, first entries with cabhQos2TrafficClassMethod 'static' and then 'dynamic' entries. SEQUENCE OF CabhQos2TrafficClassEntry .1.3.6.1.4.1.4491.2.4.8.1.4.1 |
cabhQos2TrafficClassEntryThe conceptual row definition of this table. Only entries with cabhQos2TrafficClassMethod 'static' do persist after PS reboot. CabhQos2TrafficClassEntry .1.3.6.1.4.1.4491.2.4.8.1.4.1.1 |
cabhQos2TrafficClassMethodIndicates how this entry have been created. 'static' indicates that the entry has been provisioned via SNMP or related mechanisms like a config file. 'upnp' indicates that the entry was created via UPnP Qos actions. Enumeration .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.1 |
cabhQos2TrafficClassIdxThe index of this conceptual row entry. Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.2 |
cabhQos2TrafficClassProtocolThe IANA IP transport protocol designated for this classifier. '0' means no protocol is specified as matching criteria.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.3 |
cabhQos2TrafficClassIpTypeThe type of InetAddress for cabhQos2TrafficClassSrcIp, and cabhQos2TrafficClassDestIp.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.4 |
cabhQos2TrafficClassSrcIpThe IP address to match against the packet's source IP address for this classifier. This may not be a DNS name, but may be an IPv4 or IPv6 prefix.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.5 |
cabhQos2TrafficClassDestIpThe IP address to match against the packet's source IP address fro this classifier. This may not be a DNS name, but may be an IPv4 or IPv6 prefix.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.6 |
cabhQos2TrafficClassSrcPortThe value that the layer-4 source port number in the packet must have in order to match this classifier entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.7 |
cabhQos2TrafficClassDestPortThe value that the layer-4 destination port number in the packet must have in order to match this classifier entry.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.8 |
cabhQos2TrafficClassImpNumThe traffic priority assigned to this classifier and used for the tagging of the packet streams.rw Unsigned32 .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.9 |
cabhQos2TrafficClassRowStatusThe status of this conceptual row. All writable objects in rows with cabhQosTrafficMethod 'static' may be modified at any time. An SNMP Set to Entries with cabhQosTrafficMethod 'upnp' returns an error 'wrongValue'with the exception of the RowStatus object when set to 'destroy'. An attempt to create an entry via SNMP with cabhQosTrafficMethod UPnP returns error 'wrongValue'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.8.1.4.1.1.10 |
cabhQos2Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.2 |
cabhQos2Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.2.1 |
cabhQos2ComplianceThe compliance statement for devices that implement CableHome QOS UPnP capabilities. Unknown .1.3.6.1.4.1.4491.2.4.8.2.1.1 |
cabhQos2Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.8.2.2 |
cabhQos2GroupGroup of objects for CableHome QOS management. Unknown .1.3.6.1.4.1.4491.2.4.8.2.2.1 |
cabhQos2ClassifierGroupGroup of objects for cableHome QOS Packet classification. Unknown .1.3.6.1.4.1.4491.2.4.8.2.2.2 |