BRCD-DOT1X-MIB
Management Information for configuration /querying of 802.1x authentication It is grouped into five MIBs - 1. Global level configurable admin /status 802.1x information 2. Port level EAPOL statistics information 3. Port level configuration information 4. Different Port state information and 5. 802.1x mac session information Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
brcdDot1xAuth.1.3.6.1.4.1.1991.1.1.3.38
63
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
brcdDot1xAuthManagement Information for configuration /querying of 802.1x authentication It is grouped into five MIBs - 1. Global level configurable admin /status 802.1x information 2. Port level EAPOL statistics information 3. Port level configuration information 4. Different Port state information and 5. 802.1x mac session information Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.1991.1.1.3.38 |
brcdDot1xAuthGlobalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.1 |
brcdDot1xAuthGlobalConfigQuietperiodWhen the Brocade device is unable to authenticate a Client, the amount of time the Brocade device waits before trying again.. The allowed range is from 0 to 4294967295rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.1 |
brcdDot1xAuthGlobalConfigTxPeriodWhen a Client does not send back an EAP(Extensible Authentication Protocol)-response/identity frame, the amount of time the Brocade device waits before retransmitting the EAP-request/identity frame to a Client The allowed range is from 1 to 4294967295rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.2 |
brcdDot1xAuthGlobalConfigSuppTimeOutWhen a supplicant (Client) does not respond to an EAP-request frame, the amount of time before the Brocade device retransmits the frame The allowed range is from 1 to 4294967295rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.3 |
brcdDot1xAuthGlobalConfigAuthServerTimeOutWhen the Authentication Server (RADIUS) does not respond to a message sent from the Client, the amount of time before the Brocade device retransmits the message. The allowed range is from 1 to 4294967295rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.4 |
brcdDot1xAuthGlobalConfigMaxReqThe number of times the Brocade device retransmits an EAP-request/identity request frame if it does not receive an EAP-response/identity response frame from a Clientrw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.5 |
brcdDot1xAuthGlobalConfigReAuthMaxThe number of re-authentication attempts that are permitted before the port becomes Unauthorizedrw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.6 |
brcdDot1xAuthGlobalConfigReAuthPeriodHow often the device automatically re-authenticates clients when periodic re-authentication is enabled The allowed range is from 1 to 4294967295rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.7 |
brcdDot1xAuthGlobalConfigProtocolVersionThe EAP protocol versionro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.8 |
brcdDot1xAuthGlobalConfigTotalPortsEnabledThe total number of ports that have 802.1x enabledro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.9 |
brcdDot1xAuthGlobalConfigReauthStatusUsed to enable / disable Reauthentication globallyrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.1.10 |
brcdDot1xAuthGlobalConfigMacSessionMaxAgeThe Max-Age of the 802.1x mac session- A value between 1 and 65535rw Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.1.11 |
brcdDot1xAuthGlobalConfigNoAgingDeniedSessionsEnable / Disable Mac-Session-No Aging for Denied sessionsrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.1.12 |
brcdDot1xAuthGlobalConfigNoAgingPermittedSessionsEnable / Disable Mac-Session-No Aging for Permitted sessionsrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.1.13 |
brcdDot1xAuthGlobalConfigAuthFailActionTo Configure the action to take when the authentication failsrw Enumeration .1.3.6.1.4.1.1991.1.1.3.38.1.14 |
brcdDot1xAuthPortStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.2 |
brcdDot1xAuthPortStatTableA table that contains port EAP(Extensible Authentication Protocol) frames statistics for 802.1x authentication SEQUENCE OF BrcdDot1xAuthPortStatEntry .1.3.6.1.4.1.1991.1.1.3.38.2.1 |
brcdDot1xAuthPortStatEntryAn entry of EAP frames statistics indexed by ifIndex BrcdDot1xAuthPortStatEntry .1.3.6.1.4.1.1991.1.1.3.38.2.1.1 |
brcdDot1xAuthPortStatRxEAPFramesThe total number of EAPOL frames received on the port It includes EAP frames -ro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.1 |
brcdDot1xAuthPortStatTxEAPFramesThe no of EAPOL frames transmitted on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.2 |
brcdDot1xAuthPortStatRxEAPStartFramesThe number of EAPOL-Start frames received on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.3 |
brcdDot1xAuthPortStatRxEAPLogOffFramesThe number of EAPOL-Logoff frames received on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.4 |
brcdDot1xAuthPortStatRxEAPRespIdFramesThe number of EAP frames other than Response/Identity frames received on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.5 |
brcdDot1xAuthPortStatTxEAPReqIdFramesThe number of EAP-Request/Identity frames transmitted on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.6 |
brcdDot1xAuthPortStatRxEAPInvalidFramesThe number of invalid EAPOL frames received on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.7 |
brcdDot1xAuthPortStatEAPLastFrameVersionRxThe version of last EAP frame receivedro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.8 |
brcdDot1xAuthPortStatRxEAPRespOrIdFramesThe number of received EAP response or Id frames on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.9 |
brcdDot1xAuthPortStatRxLengthErrorFrameThe received EAP Length Error framero Integer32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.10 |
brcdDot1xAuthPortStatTxRequestFramesThe number of transmitted EAP request frames on the portro Counter32 .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.11 |
brcdDot1xAuthPortStatLastEAPFrameSourceThe MAC address of the source from which the last EAP frame camero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1991.1.1.3.38.2.1.1.12 |
brcdDot1xAuthPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.3 |
brcdDot1xAuthPortConfigTableA table that allows configuration of dot1x values for a given port SEQUENCE OF BrcdDot1xAuthPortConfigEntry .1.3.6.1.4.1.1991.1.1.3.38.3.1 |
brcdDot1xAuthPortConfigEntryAn entry of 802.1x config values BrcdDot1xAuthPortConfigEntry .1.3.6.1.4.1.1991.1.1.3.38.3.1.1 |
brcdDot1xAuthPortConfigPortControlThe configured port control type for the interface which can be 1. force-unauthorized - port's controlled port is placed unconditionally in the unauthorized state 2. control-auto - the controlled port is unauthorized until authentication takes place between client and RADIUS 3. force-authorized - the port's controlled port is placed unconditionally in the authorized staterw Enumeration .1.3.6.1.4.1.1991.1.1.3.38.3.1.1.1 |
brcdDot1xAuthPortConfigFilterStrictSecTo configure filter strict security on the interface - enable(1) or disable(2)rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.3.1.1.2 |
brcdDot1xAuthPortConfigDot1xOnPortTo Configure (enable / disable) 802.1x on an interface levelrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.3.1.1.3 |
brcdDot1xAuthPortState OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.4 |
brcdDot1xAuthPortStateTableA table that contains entries of port dot1x values SEQUENCE OF BrcdDot1xAuthPortStateEntry .1.3.6.1.4.1.1991.1.1.3.38.4.1 |
brcdDot1xAuthPortStateEntryAn entry of 802.1x config values indexed by ifIndex to be able to have port values BrcdDot1xAuthPortStateEntry .1.3.6.1.4.1.1991.1.1.3.38.4.1.1 |
brcdDot1xAuthPortStateMacSessionsNumber of 802.1x MAC sessions per portro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.1 |
brcdDot1xAuthPortStateAuthMacSessionsNumber of Authorized MAC sessions per portro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.2 |
brcdDot1xAuthPortStateOriginalPVIDOriginally configured(not dynamically assigned) PVID(port's default VLAN ID) for the portro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.3 |
brcdDot1xAuthPortStatePVIDMacTotalThe number of devices transmitting untagged traffic on the port's PVIDro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.4 |
brcdDot1xAuthPortStatePVIDMacAuthorizedThe number of devices transmitting untagged traffic on the port's PVID as a result of dynamic VLAN assignmentro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.5 |
brcdDot1xAuthPortStatePortVlanStateThe Current Vlan state the port is in, which can be RADIUS -The port's PVID was dynamically assigned by a RADIUS server Restricted - The port's PVID is the restricted VLAN Normal - The port's PVID is not set by a RADIUS server, nor is it the restricted VLANro Enumeration .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.6 |
brcdDot1xAuthPortStatePVIDThe Dot1x Authentication default Port VLAN Idro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.7 |
brcdDot1xAuthPortStateRestrictPVIDThe number of MAC sessions on the port that failed authentication and are now in the restricted VLAN (which should be the port's current PVID)ro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.8 |
brcdDot1xAuthPortStateRadiusAssignPVIDThe number of times the port has changed PVIDs due to Radius VLAN assignmentro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.4.1.1.9 |
brcdDot1xAuthMacSession OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.5 |
brcdDot1xAuthMacSessionTableA table that contains 802.1x MAC sessions SEQUENCE OF BrcdDot1xAuthMacSessionEntry .1.3.6.1.4.1.1991.1.1.3.38.5.1 |
brcdDot1xAuthMacSessionEntryAn entry containing information applicable to a particular interface and client MAC ie., dot1x-mac-session BrcdDot1xAuthMacSessionEntry .1.3.6.1.4.1.1991.1.1.3.38.5.1.1 |
brcdDot1xAuthMacSessionAuthMacMac address of the client - which basically represents the username used for RADIUS authentication MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.1 |
brcdDot1xAuthMacSessionUserNameUser name of the 802.1x mac sessionro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.2 |
brcdDot1xAuthMacSessionIncomingVlanIdIncoming VLAN IDro VlanId .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.3 |
brcdDot1xAuthMacSessionCurrentVlanIdThe VLAN to which the port is currently assignedro VlanId .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.4 |
brcdDot1xAuthMacSessionAccessStatusThe authentication state of the dot1x-mac-session - which can be permitted, denied, restricted or in the Init statero Enumeration .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.5 |
brcdDot1xAuthMacSessionMaxAgeMAX Age of the mac session in which the MAC address is authenticated.ro Unsigned32 .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.6 |
brcdDot1xAuthMacSessionAddrTypeClient(supplicant) IP address Type. Supported address types are ipv4(1) and ipv6(2)ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.7 |
brcdDot1xAuthMacSessionIpAddrThe IP Address of the clientro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.8 |
brcdDot1xAuthMacSessionAgingThe age's type - Hardware or Software aging, Ena in which case the aging hasn't started, or notapplicable when there is a fake 802.1x mac sessionro Enumeration .1.3.6.1.4.1.1991.1.1.3.38.5.1.1.9 |
brcdDot1xAuthGlobalAdminGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.38.6 |
brcdDot1xAuthGlobalAdminConfigStatusUsed to enable /disable 802.1x authentication globallyrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.1991.1.1.3.38.6.1 |