BNET-ATM-ATOM-AUG-MIB
Standard SNMP MIB module defining data structures for BNET-ATM-ATOM-AUG-MIB.
Imported Objects
Objects
13 total| Object Name |
|---|
bnetAtmAug OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.14.3 |
IMPORTS Unknown .1.3.6.1.4.1.45.1.6.14.3 |
bnetAtmDeviceAtmAddrThe ATM address which applies for this particular device.
Where multiple addresses apply, include only primary one.ro AtmAddr (ATM-TC-MIB) .1.3.6.1.4.1.45.1.6.14.3.1 |
bnetAtmLearnAddrsWhen set to learnAddrs, atmAddrVcl and atmVclAddrBind
tables will keep track of ATM Addresses.rw Enumeration .1.3.6.1.4.1.45.1.6.14.3.2 |
atmfAddressClientTableProvides additional detail about each ATM client. SEQUENCE OF AtmfAddressClientEntry .1.3.6.1.4.1.45.1.6.14.3.3 |
atmfAddressClientEntryAn entry with information about an ATM client. AtmfAddressClientEntry .1.3.6.1.4.1.45.1.6.14.3.3.1 |
atmfAddressPortUni Portro INTEGER .1.3.6.1.4.1.45.1.6.14.3.3.1.1 |
atmfAddressAtmAddressATM Addressro AtmAddr (ATM-TC-MIB) .1.3.6.1.4.1.45.1.6.14.3.3.1.2 |
atmfAddressClientTypeIndicates the type of client.ro Enumeration .1.3.6.1.4.1.45.1.6.14.3.3.1.3 |
atmfAddressClientCallCountIndicates number of calls currently up, which
involve this particular client address.ro INTEGER -- Rsyntax INTEGER .1.3.6.1.4.1.45.1.6.14.3.3.1.4 |
bnetAtmSoftPVccExtnTableThe table used to maintain Soft Permanent Virtual
Channel Connection (Soft PVCCs) circuit ids.
The Soft PVCC table is applicable only to switches. SEQUENCE OF BnetAtmSoftPVccExtnEntry .1.3.6.1.4.1.45.1.6.14.3.4 |
bnetAtmSoftPVccExtnEntryEach entry in this table represents the circuit id of a
Soft Permanent Virtual Channel Connection (Soft PVCC). BnetAtmSoftPVccExtnEntry .1.3.6.1.4.1.45.1.6.14.3.4.1 |
bnetAtmSoftPVccCircuitIdThis is the circuit id for a Soft PVCC.ro INTEGER .1.3.6.1.4.1.45.1.6.14.3.4.1.1 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.