ATM-TRAP-MIB
Standard SNMP MIB module defining data structures for ATM-TRAP-MIB.
Imported Objects
Objects
4 total| Object Name |
|---|
IMPORTSThis trap is sent when the SSCOP goes down
i.e., when the peer protocol has failed to
respond to the max number of status polls
by its peer.
atmPortCardIndex.........the ATM card id.
atmPortPortIndex.........the ATM port id.
atmPortSscopStatus ..........the status of the
SSCOP protocol. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.7.0.1 |
s5CtrAdmaLockupThis trap is sent when a ADMA lockup condition
is detected on the MCP. The MCP must be reset
to clear this condition.
atmPortCardIndex.........the ATM card id.
atmPortPortIndex.........the ATM port id. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.7.0.2 |
s5CtrAcmaLockupThis trap is sent when a ACMA queue stuck
condition is detected on the MCP. The
MCP must be reset to clear this condition.
atmPortCardIndex.........the ATM card id. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.7.0.3 |
s5CtrSscopUpThis trap is sent when the SSCOP uomes up.
atmPortCardIndex.........the ATM card id.
atmPortPortIndex.........the ATM port id.
atmPortSscopStatus ..........the status of the
SSCOP protocol. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.7.0.4 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.