ATM-ACCOUNTING-INFORMATION-MIB
AI MIB Summary
The ATM-ACCOUNTING-INFORMATION-MIB enables network management systems to retrieve accounting counters for Asynchronous Transfer Mode (ATM) virtual circuits, specifically tracking byte and packet volumes, connection durations, and traffic statistics for billing and capacity planning. This module facilitates the monitoring of ATM connection usage metrics across ATM switches and routers to support resource allocation analysis and cost recovery processes.
The MIB module for identifying items of accounting information which are applicable to ATM connections.
Main OID:
atmAccountingInformationMIB.1.3.6.1.4.1.9.10.18
38
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
atmAccountingInformationMIBThe MIB module for identifying items of accounting
information which are applicable to ATM connections. MODULE-IDENTITY .1.3.6.1.4.1.9.10.18 |
atmAcctngMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.18.1 |
atmAcctngDataObjectsThis identifier defines a subtree under which various
objects are defined such that a set of objects to be
collected as ATM accounting data can be specified as a
(subtree, list) tuple using this identifier as the subtree. OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.18.1.1 |
atmAcctngConnectionTypeThe type of connection. Enumeration .1.3.6.1.4.1.9.10.18.1.1.1 |
atmAcctngCastTypeAn indication of whether the connection is point-to-point
or point-to-multipoint. Enumeration .1.3.6.1.4.1.9.10.18.1.1.2 |
atmAcctngIfNameA textual name for the interface on which the data for the
connection was collected. If the local SNMP agent supports
the object ifName, the value of this object must be
identical that of ifName in the conceptual row of the
ifTable corresponding to this interface. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9.10.18.1.1.3 |
atmAcctngIfAliasThe 'alias' name for the interface as specified by a
network manager, e.g., via a management set operation to
modify the relevant instance of the ifAlias object. Note
that in contrast to ifIndex, ifAlias provides a non-volatile
'handle' for the interface, the value of which is retained
across agent reboots. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9.10.18.1.1.4 |
atmAcctngVpiThe VPI used for the connection. INTEGER .1.3.6.1.4.1.9.10.18.1.1.5 |
atmAcctngVciThe VCI used for the connection. INTEGER .1.3.6.1.4.1.9.10.18.1.1.6 |
atmAcctngCallingPartyThe connection's calling party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string. AtmAddr .1.3.6.1.4.1.9.10.18.1.1.7 |
atmAcctngCalledPartyThe connection's called party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string. AtmAddr .1.3.6.1.4.1.9.10.18.1.1.8 |
atmAcctngCallReferenceThe connection's call reference value (e.g., from Q.2931).
If unknown (e.g., for a PVC), then the value of this object
is the zero-length string. OCTET STRING .1.3.6.1.4.1.9.10.18.1.1.9 |
atmAcctngStartTimeThe time when the connection was established. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.10.18.1.1.10 |
atmAcctngCollectionTimeThe time at which the data in this record was collected. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.10.18.1.1.11 |
atmAcctngCollectModeThe reason why this connection data was collected. Enumeration .1.3.6.1.4.1.9.10.18.1.1.12 |
atmAcctngReleaseCauseIf the connection data was collected because of the release
of an SVC, then this is the cause code in the Release
message for the connection; otherwise, this object has the
value zero. Integer32 .1.3.6.1.4.1.9.10.18.1.1.13 |
atmAcctngServiceCategoryThe connection's service category. Enumeration .1.3.6.1.4.1.9.10.18.1.1.14 |
atmAcctngTransmittedCellsThe number of cells, including OAM cells, transmitted by
this switch on this connection. Counter64 .1.3.6.1.4.1.9.10.18.1.1.15 |
atmAcctngTransmittedClp0CellsThe number of cells with CLP=0, including OAM cells,
transmitted by this switch on this connection. Counter64 .1.3.6.1.4.1.9.10.18.1.1.16 |
atmAcctngReceivedCellsThe number of cells, including OAM cells, received by this
switch on this connection. Counter64 .1.3.6.1.4.1.9.10.18.1.1.17 |
atmAcctngReceivedClp0CellsThe number of cells with CLP=0, including OAM cells,
received by this switch on this connection. Counter64 .1.3.6.1.4.1.9.10.18.1.1.18 |
atmAcctngTransmitTrafficDescriptorTypeThe traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which the switch transmits
cells on the connection. OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.18.1.1.19 |
atmAcctngTransmitTrafficDescriptorParam1The first traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.20 |
atmAcctngTransmitTrafficDescriptorParam2The second traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.21 |
atmAcctngTransmitTrafficDescriptorParam3The third traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.22 |
atmAcctngTransmitTrafficDescriptorParam4The fourth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.23 |
atmAcctngTransmitTrafficDescriptorParam5The fifth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.24 |
atmAcctngReceiveTrafficDescriptorTypeThe traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which this switch receives
cells on this connection. OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.18.1.1.25 |
atmAcctngReceiveTrafficDescriptorParam1The first traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.26 |
atmAcctngReceiveTrafficDescriptorParam2The second traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.27 |
atmAcctngReceiveTrafficDescriptorParam3The third traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.28 |
atmAcctngReceiveTrafficDescriptorParam4The fourth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.29 |
atmAcctngReceiveTrafficDescriptorParam5The fifth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType. INTEGER .1.3.6.1.4.1.9.10.18.1.1.30 |
atmAcctngCallingPartySubAddressThe connection's calling party sub-address. If the
connection has no calling party sub-address, or it's value
is unknown, then the value of this object is the zero-length
string. AtmAddr .1.3.6.1.4.1.9.10.18.1.1.31 |
atmAcctngCalledPartySubAddressThe connection's called party sub-address. If the
connection has no called party sub-address, or it's value is
unknown, then the value of this object is the zero-length
string. AtmAddr .1.3.6.1.4.1.9.10.18.1.1.32 |
atmAcctngRecordCrc16The value of the CRC-16 checksum (as defined by ISO 3309
(HDLC) and/or ITU X.25) calculated over the accounting
record containing this object.
While the mechanism for calculating/encoding the checksum
value is specific to the method of encoding the accounting
record, an accounting record containing this object is
typically generated by initializing the value of this object
to the all-zeros string ('0000'H), with the location of
these zeros being saved. After generating the record, the
checksum is calculated over the whole connection record and
then the all-zeros value is overwritten (at the saved
location) by the calculated value of the checksum. OCTET STRING .1.3.6.1.4.1.9.10.18.1.1.33 |
atmAcctngTransmittedPeakCellsThe number of cells transmitted on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available. Integer32 .1.3.6.1.4.1.9.10.18.1.1.34 |
atmAcctngReceivedPeakCellsThe number of cells received on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available. Integer32 .1.3.6.1.4.1.9.10.18.1.1.35 |