ASCEND-MIBVDSLNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBVDSLNET-MIB.
22
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
mibvdslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.9 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.9 |
mibvdslNetworkProfileTableA list of mibvdslNetworkProfile profile entries. SEQUENCE OF MibvdslNetworkProfileEntry .1.3.6.1.4.1.4253.1.9.1 |
mibvdslNetworkProfileEntryA mibvdslNetworkProfile entry containing objects that
maps to the parameters of mibvdslNetworkProfile profile. MibvdslNetworkProfileEntry .1.3.6.1.4.1.4253.1.9.1.1 |
vdslNetworkProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.9.1.1.1 |
vdslNetworkProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.9.1.1.2 |
vdslNetworkProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.9.1.1.3 |
vdslNetworkProfile-NameFor future use. The current design does not use the name field but instead references Vdsl lines by the physical address; we may in the future support referencing Vdsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Vdsl line physical address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.9.1.1.4 |
vdslNetworkProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.11 |
vdslNetworkProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.12 |
vdslNetworkProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.9.1.1.13 |
vdslNetworkProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.14 |
vdslNetworkProfile-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.16 |
vdslNetworkProfile-SparingModePort sparing operational mode for this port.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.17 |
vdslNetworkProfile-IgnoreLineupIgnore line up value for this port.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.18 |
vdslNetworkProfile-LineConfig-NailedGroupA number that identifies the this unique physical DSL line.rw INTEGER .1.3.6.1.4.1.4253.1.9.1.1.19 |
vdslNetworkProfile-LineConfig-VpSwitchingVpiThe Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.rw INTEGER .1.3.6.1.4.1.4253.1.9.1.1.20 |
vdslNetworkProfile-LineConfig-UpStreamFixedRateThe following Up/Down stream rate relationships are supported: (0.965Mbps/19.306Mbps); (1.930Mbps/11.463Mbps); (3.861Mbps/11.463Mbps); (3.861Mbps/15.626Mbps). Up Stream range: 0.965Mbps - 3.861Mbps.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.22 |
vdslNetworkProfile-LineConfig-DownStreamFixedRateThe following Up/Down stream rate relationships are supported: (0.965Mbps/19.306Mbps); (1.930Mbps/11.463Mbps); (3.861Mbps/11.463Mbps); (3.861Mbps/15.626Mbps). Down Stream range: 11.463Mbps - 15.626Mbps.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.23 |
vdslNetworkProfile-LineConfig-ConfigLoopbackConfiguration of different modem loopbacks.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.24 |
vdslNetworkProfile-LineConfig-PsdValueConfiguration of PSD parameter. It defines the power that is allowed to be sent to the line.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.25 |
vdslNetworkProfile-LineConfig-LinkStatecmdSets the link connect state. Use this to control status of the VDSL link connect state machine. The auto-connect-cmd will train modem up to the final service. All the other commands are used to manualy operate the VDSL link connect state machine.rw Enumeration .1.3.6.1.4.1.4253.1.9.1.1.26 |