ASCEND-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIB.
182
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
ascend OBJECT IDENTIFIER .1.3.6.1.4.1.529 |
RFC1155-SMI Unknown .1.3.6.1.4.1.529 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.529.1 |
multiband OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.1 |
max OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2 |
max200 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.1 |
max1800 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.2 |
max2000 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.3 |
max4000 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.4 |
max4002 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.5 |
max4004 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.6 |
max6000 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.7 |
max800 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.8 |
max3000 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.9 |
dslmax20 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.10 |
terminator OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.11 |
cvmax100 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.2.12 |
pipeline OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3 |
pipe15 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.1 |
pipe25 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.2 |
pipe25Px OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.3 |
pipe25Fx OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.4 |
pipe50 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.5 |
pipe75 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.6 |
pipe130T1 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.7 |
pipe400 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.8 |
pipe220 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.9 |
dslPipeAcap OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.10 |
dslPipeS OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.11 |
dslPipe2S OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.12 |
dslPipeAdslCoeC OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.13 |
dslPipeSdslCoe OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.14 |
dslPipeSdslCoe2S OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.15 |
pipe85 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.16 |
pipe50LS56 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.17 |
pipe130V35 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.18 |
pipe130N56 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.19 |
dslPipeAdslCoeD OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.20 |
dslPipeAdmt OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.21 |
dslPipeAlctlDmt OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.22 |
spipe95 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.23 |
spipe155T1 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.24 |
dslPipe50SdslCell OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.25 |
dslPipeSdslHs OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.3.26 |
max-tnt OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.4 |
dslTnt OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.5 |
aqueduct OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.6 |
aq300 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.6.1 |
stinger-10 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.7 |
apx-8000 OBJECT IDENTIFIER .1.3.6.1.4.1.529.1.8 |
slots OBJECT IDENTIFIER .1.3.6.1.4.1.529.2 |
hostTypes OBJECT IDENTIFIER .1.3.6.1.4.1.529.3 |
hostTypeAny OBJECT IDENTIFIER .1.3.6.1.4.1.529.3.1 |
hostTypeDual OBJECT IDENTIFIER .1.3.6.1.4.1.529.3.2 |
hostTypeQuad OBJECT IDENTIFIER .1.3.6.1.4.1.529.3.3 |
hostTypeAim2 OBJECT IDENTIFIER .1.3.6.1.4.1.529.3.4 |
hostTypeAim6 OBJECT IDENTIFIER .1.3.6.1.4.1.529.3.5 |
advancedAgent OBJECT IDENTIFIER .1.3.6.1.4.1.529.4 |
lanTypes OBJECT IDENTIFIER .1.3.6.1.4.1.529.5 |
lanTypeAny OBJECT IDENTIFIER .1.3.6.1.4.1.529.5.1 |
lanTypeEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.529.5.2 |
lanTypeEtherData OBJECT IDENTIFIER .1.3.6.1.4.1.529.5.3 |
doGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.6 |
doTableA list of do entries. SEQUENCE OF DoEntry .1.3.6.1.4.1.529.6.1 |
doEntryAn entry containing all of the action (do) commands
and the slot and item index. DoEntry .1.3.6.1.4.1.529.6.1.1 |
doSlotIndexThe index of the slot containing the item for which
an action is desired. The valid range is 1 through
the value slotNumber.ro INTEGER .1.3.6.1.4.1.529.6.1.1.1 |
doItemIndexThe item number on the indexed slot for which an
action is desired. The valid range is 1 through
the value slotItems in the slotTable when indexed by
a value equal to doSlotIndex.ro INTEGER .1.3.6.1.4.1.529.6.1.1.2 |
doDialWhen read returns valid if the indexed slot/item
can dial a call. Writing any value will cause
a call to be placed when valid, otherwise the write
is ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.3 |
doHangUpWhen read returns valid if the indexed slot/item
can terminate a call. Writing any value will cause
the call to be terminated when valid, otherwise the
write is ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.4 |
doAnswerWhen read returns valid if the indexed slot/item
can answer a call. Writing any value will cause
the call to be answered when valid, otherwise the
write is ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.5 |
doExtendBWWhen read returns valid if the indexed slot/item
can extend bandwidth. Writing any value will cause
bandwidth to be extended when valid, otherwise the
write is ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.6 |
doContractBWWhen read returns valid if the indexed slot/item
can contract bandwidth. Writing any value will cause
bandwidth to be contracted when valid, otherwise the
write is ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.7 |
doBegEndRemoteLBWhen read returns valid if the indexed slot/item
can enter or exit remote loopback. Writing any
value will cause the current remote loopback state
to be toggled when valid, otherwise the write is
ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.8 |
doBegEndBERTWhen read returns valid if the indexed slot/item
can enter or exit BERT test mode. Writing any
value will cause the current BERT test state
to be toggled when valid, otherwise the write is
ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.9 |
doResynchronizeWhen read returns valid if the indexed slot/item
can issue a resynchronize command. Writing any
value will cause a resynchronize command to be
issued when valid, otherwise the write is
ignored.rw Enumeration .1.3.6.1.4.1.529.6.1.1.10 |
hostStatus OBJECT IDENTIFIER .1.3.6.1.4.1.529.7 |
hostStatusTableA table of host port status entries. A host port
status entry potentialy exists for every slot/item.
Host port status entries are only meaningful for
slot/items that reference a host port. When indexed
by other slot/items NO SUCH NAME will be returned. SEQUENCE OF HostStatusEntry .1.3.6.1.4.1.529.7.1 |
hostStatusEntryAn entry containing the host port status of the
indexed slot/item. HostStatusEntry .1.3.6.1.4.1.529.7.1.1 |
hostStatusSlotIndexA unique value for each slot. The slot identified
by a particular value of this index is the same slot
as identified by the same value of slotIndex.ro INTEGER .1.3.6.1.4.1.529.7.1.1.1 |
hostStatusItemIndexIndex to each item defined for each slot. Since
entries in this table are only valid for host ports
an item number is a port number within the indexed
slot.ro INTEGER .1.3.6.1.4.1.529.7.1.1.2 |
hostStatusLocalNameThe name from the current call profile of the indexed
host slot and port.ro OCTET STRING .1.3.6.1.4.1.529.7.1.1.3 |
hostStatusDialNumThe phone number from the current call profile of the
indexed host slot and port.ro OCTET STRING .1.3.6.1.4.1.529.7.1.1.4 |
hostStatusCallTypeThe type of call from the current call profile of the
indexed host slot and port.ro Enumeration .1.3.6.1.4.1.529.7.1.1.5 |
hostStatusCallMgmThe call management protocol from the current
call profile for the indexed host slot and port.
Call management is only meaningful for calls using
an inverse multiplexing protocol.ro Enumeration .1.3.6.1.4.1.529.7.1.1.6 |
hostStatusDataSvcThe type of service from the current call profile
for the indexed host slot and port.ro Enumeration .1.3.6.1.4.1.529.7.1.1.7 |
hostStatusCallStateShows the current state of the current call for the
indexed host slot and port. The returned value will
indicates the same state displayed in a call status
window for the port.ro Enumeration .1.3.6.1.4.1.529.7.1.1.8 |
hostStatusRemNameThe value displayed on the 4th line of the call
status menu. When the hostStatusCallType is aim( 1 )
this value is the name of the host port on the far
end of a connection, or the far-end system name if
the host port has not been named. An empty string
is returned when there is no call active or when
aim( 1 ) is not being used.ro OCTET STRING .1.3.6.1.4.1.529.7.1.1.9 |
hostStatusChannelsThe number of channels in use by the call as
displayed on the third line of the call status
menu for the indexed slot and port.ro INTEGER .1.3.6.1.4.1.529.7.1.1.10 |
hostStatusDurationThe duration of the call associated with the
indexed host slot and port, measured in seconds.ro INTEGER .1.3.6.1.4.1.529.7.1.1.11 |
console OBJECT IDENTIFIER .1.3.6.1.4.1.529.8 |
consoleNumberThe number of consoles supported by this device.ro INTEGER .1.3.6.1.4.1.529.8.1 |
consoleTableA list of console entries. SEQUENCE OF ConsoleEntry .1.3.6.1.4.1.529.8.2 |
consoleEntryAn entry containing objects that describe the
indexed console port. ConsoleEntry .1.3.6.1.4.1.529.8.2.1 |
consoleIndexA unique value for each console. It's value ranges
between 1 and the value consoleNumber. This is the
index into the console table to identify a
particular console.ro INTEGER .1.3.6.1.4.1.529.8.2.1.1 |
consoleIfThe interface number associated with the indexed
console. This number can be used to index into
the interface (and other) tables to obtain detailed
console status.ro INTEGER .1.3.6.1.4.1.529.8.2.1.2 |
consoleTypeThe type of console in the indexed entry. When
no console is plugged into a console port the
value inactive(5) is returned. The value remote(6)
indicates a console initiated via remote management
or TELNET session.ro Enumeration .1.3.6.1.4.1.529.8.2.1.3 |
consoleSecurityThe security profile, in the range of 1 through
the number of profiles supported by the unit, of
the indexed console. The default security profile
is profile number 1.
Note: This attribute is supported on non-TNT
platforms only.ro INTEGER .1.3.6.1.4.1.529.8.2.1.4 |
consoleSpecificA reference to MIB definitions specific to the
console port. Contains the object identifier { 0 0 }
if there is no console specific information for the
indexed console.ro OBJECT IDENTIFIER .1.3.6.1.4.1.529.8.2.1.5 |
systemStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.9 |
sysAbsoluteStartupTimeThe time system startup up in seconds since
January 1, 1990. This value in concert with
'sysSecsSinceStartup' below can be used to
compute the current time in seconds since 1/1/90.ro INTEGER .1.3.6.1.4.1.529.9.1 |
sysSecsSinceStartupThe number of seconds since system startup.ro INTEGER .1.3.6.1.4.1.529.9.2 |
sysMibVersionNumVersion number of this private MIB. Versions
numbers start at 1 and increment by 1 for
every major revision. Major revisions are
additions/deletions to this MIB.ro INTEGER (1..'7fffffff'h) SYNTAX INTEGER .1.3.6.1.4.1.529.9.3 |
sysMibMinorRevNumValue represents the minor revision number
of this MIB. Minor revision numbers start
at 0 and increment by 1 for each revision.
Minor revisions are textual or comment changes.ro INTEGER (1..'7fffffff'h) SYNTAX INTEGER .1.3.6.1.4.1.529.9.4 |
sysConfigTftp OBJECT IDENTIFIER .1.3.6.1.4.1.529.9.5 |
sysConfigTftpCmdThis variable instructs the system to perform the specified
tftp operation.
Note: loadCode( 6 ) is not supported on TNT platform.rw Enumeration .1.3.6.1.4.1.529.9.5.1 |
sysConfigTftpStatusThis variable indicates the status of a save or restore operation
through tftp.ro Enumeration .1.3.6.1.4.1.529.9.5.2 |
sysConfigTftpHostAddrThis variable indicates the host address where the configuration
file is saved to or restored from through tftp.rw IpAddress .1.3.6.1.4.1.529.9.5.3 |
sysConfigTftpFilenameThis variable indicates the file name of the configuration file to
save to or restore from a SNMP host through tftp.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.5.4 |
sysConfigTftpPortThis variable indicates the port # to use when starting a TSAVE
TRESTORE command. Normally this would be port 69, but we need
to allow the Java Console to override this in case the Console
workstation has a TFTP server already running.rw INTEGER .1.3.6.1.4.1.529.9.5.5 |
sysConfigTftpParameterThis variable indicates the list of profiles to be included or
excluded during the save operation through tftp. The snmp agent
will modify the set string to an uppercase space-separated
new string and return the changed value. This is to clarify
the case insensitive profile naming.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.5.6 |
sysConfigRadius OBJECT IDENTIFIER .1.3.6.1.4.1.529.9.6 |
sysConfigRadiusCmdThis variable instructs the system to re-read its RADIUS
configuration. This variable will return a general error if
RADIUS is not configured or if sysConfigRadiusStatus has a
value of processing(2).rw Enumeration .1.3.6.1.4.1.529.9.6.1 |
sysConfigRadiusStatusThis variable indicates the status of the last RADIUS configuration
retrieval. This includes the boot time retrieval.ro Enumeration .1.3.6.1.4.1.529.9.6.2 |
sysAbsoluteCurrentTimeThe current system time in seconds since
January 1, 1990. Changing this value may
result in a change of sysAbsoluteStartupTime
and not of sysSecsSinceStartup. The following
relationship holds:
sysAbsoluteCurrentTime - sysAbsoluteStartupTime = sysSecsSinceStartup.rw INTEGER .1.3.6.1.4.1.529.9.7 |
sysResetThe reset takes effect after 1 minute.rw Enumeration .1.3.6.1.4.1.529.9.8 |
sysLoadNameThe name of the load which is currently running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.9 |
sysAuthPreferenceAn incoming call can be authenticated using a local profile
or one from an authentication server such as RADIUS or TACACS.
local-first means authenticate from a local profile first,
and if that fails, try the authentication server.
remote-first means get a profile from the authentication
server and authenticate from that and if that fails,
try to authenticate from a local profile.
remote-no is the same as remote-first except if the external
authentication server NACKs the request, then the connection
will be denied, i.e. no search of the local profiles will be
made.rw Enumeration .1.3.6.1.4.1.529.9.10 |
sysSPROM OBJECT IDENTIFIER .1.3.6.1.4.1.529.9.11 |
sysSPROMSerialNumberThe serial number as stored in the security PROM.
The same value is also returned as part of sysName.ro INTEGER .1.3.6.1.4.1.529.9.11.1 |
sysSPROMOptions1The various bit positions are:
(2 ** 0) - rs366Enabled
(2 ** 1) - dChannelEnabled
(2 ** 2) - autoDBAEnabled
(2 ** 3) - bondingEnabled
(2 ** 4) - aimEnabled
(2 ** 5) - v25bisEnabled
(2 ** 6) - x21Enabled
(2 ** 7) - switchedEnabled
(2 ** 8) - mrateEnabled
(2 ** 9) - pbxEnabled
(2 ** 10) - pcbusEnabled
(2 ** 11) - bridgingEnabled
(2 ** 12) - pipeHxEnabled
(2 ** 13) - frameRelayEnabled
(2 ** 14) - maxLinkClientEnabled
(2 ** 15) - dataCallEnabled
(2 ** 16) - dualSlotT1Enabled
(2 ** 17) - r2SignalingEnabled
(2 ** 18) - domesticEnabled
(2 ** 19) - modemTSDialoutEnabled
(2 ** 20) - pipePxEnabled
(2 ** 21) - firewallsEnabled
(2 ** 22) - serialPortT1_CSU_Enabled
(2 ** 23) - pipePotsEnabled
(2 ** 24) - forceMultibandPlatformSimulationEnabled
(2 ** 25) - k56SlotCardOnlyEnabled
(2 ** 26) - networkManagementEnabled
(2 ** 27) - advancedAgentEnabled (DEPRECATED)
(2 ** 28) - phsSupportEnabled
(2 ** 29) - selectoolsEnabled
(2 ** 30) - routingProtocolsDisabled
(2 ** 31) - tunnelProtocolsDisabled (DEPRECATED).ro INTEGER .1.3.6.1.4.1.529.9.11.2 |
sysSPROMOptions2The various bit positions are:
(2 ** 0) - atmpEnabled
(2 ** 1) - l2tpEnabled
(2 ** 2) - pptpEnabled
(2 ** 3) - l2fEnabled
(2 ** 4) - ipinipEnabled
(2 ** 5) - vRouterEnabled
(2 ** 6) - aodiEnabled
(2 ** 7) - maddModemEnabled
(2 ** 8) - madd96DevicesEnabled
(2 ** 9) - maddHdlcEnabled
(2 ** 10) - v110Enabled
(2 ** 11) - sdtnEnabled
(2 ** 12) - restrictDSLTermEnabled
(2 ** 13) - megamaxEnabled
(2 ** 14) - maxtapEnabled
(2 ** 15) - phs21Enabled
(2 ** 16) - atmSvcEnabled
(2 ** 17) - frVcEnabled
(2 ** 18) - networkManagementVoipEnabled
(2 ** 19) - networkManagementPlusEnabled
(2 ** 20) - networkManagementPlusVoipEnabledro INTEGER .1.3.6.1.4.1.529.9.11.3 |
sysSPROMCountries1The various bit positions are:
(2 ** 0) - FranceIsdn
(2 ** 1) - UKIsdn
(2 ** 2) - BelgiumIsdn
(2 ** 3) - JapanIsdn
(2 ** 4) - AustraliaIsdn
(2 ** 5) - GermanIsdn
(2 ** 6) - UKDpnss
(2 ** 7) - SwissIsdn
(2 ** 8) - GloBandIsdnro INTEGER .1.3.6.1.4.1.529.9.11.4 |
resetStat OBJECT IDENTIFIER .1.3.6.1.4.1.529.9.12 |
resetStatEtherClear Ethernet statistics.rw INTEGER .1.3.6.1.4.1.529.9.12.1 |
resetStatWANClear specified interface's WAN statistics.rw INTEGER .1.3.6.1.4.1.529.9.12.2 |
resetStatAllClear all WAN statistics.rw INTEGER .1.3.6.1.4.1.529.9.12.3 |
sysLastRestartReasonThe error code for the previous box restart. The error codes
are identical to ones obtained via fatal-history from the
debug monitor screen.ro Enumeration .1.3.6.1.4.1.529.9.13 |
sysConfigChangeThe name and security index (if available)
of the user who changed the configuration.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.14 |
sysConfigFlash OBJECT IDENTIFIER .1.3.6.1.4.1.529.9.15 |
sysConfigFlashCmdThis variable instructs the system to copy the stored code
image from PCMCIA flash to internal flash or vice versa.rw Enumeration .1.3.6.1.4.1.529.9.15.1 |
sysConfigFlashCopyStatusThis variable indicates the status of a flash image copy.ro Enumeration .1.3.6.1.4.1.529.9.15.2 |
sysConfigInternalFlashImageVersionThe code version stored on the internal flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.15.3 |
sysConfigPCMCIAFlashImageVersionThe code version stored on the PCMCIA flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.15.4 |
fatalLogTableA list of the most recent Fatal Log entries of the
system as well as the included slot cards SEQUENCE OF FatalLogTableEntry .1.3.6.1.4.1.529.9.16 |
fatalLogTableEntryDefinition of the row entries in the Fatal Log Table FatalLogTableEntry .1.3.6.1.4.1.529.9.16.1 |
fatalLogIndexDynamic index that reflects the index used in the
Fatal LOG table, starting with the most oldest event.ro INTEGER .1.3.6.1.4.1.529.9.16.1.1 |
fatalLogSlotIndexAn index into the slotTable This has the same
value as slotIndex, it is set to 0 for systems
with one logical slot card.ro INTEGER .1.3.6.1.4.1.529.9.16.1.2 |
fatalLogSoftwareVerionThe version of the software running, when this
entry was created by the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.16.1.3 |
fatalLogUserprofileThe user responsible for reseting the card. This
will be set to the empty string if unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.16.1.4 |
fatalLogLoadNameThe name of the Load executing on the card, it gives
a textual description of the software code that was
running on the system when the entry was created.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.16.1.5 |
fatalLogLocationThe IP address from which a manual system reset was triggered.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.9.16.1.6 |
fatalLogReasonThe reason for reset as reported by the system. For a more
detailed description consult the user manual.ro Enumeration .1.3.6.1.4.1.529.9.16.1.7 |
fatalLogAbsoluteTimeThe time at which the system was reset.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.9.16.1.8 |
eventGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.10 |
callStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.11 |
sessionStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.12 |
radiusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.13 |
mCastGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.14 |
lanModemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.15 |
firewallGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.16 |
wanDialoutPkt OBJECT IDENTIFIER .1.3.6.1.4.1.529.17 |
powerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.529.18 |
multiShelf OBJECT IDENTIFIER .1.3.6.1.4.1.529.19 |
miscGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.20 |
asgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.21 |
flashGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.22 |
configuration OBJECT IDENTIFIER .1.3.6.1.4.1.529.23 |
mibinternetProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.1 |
mibframeRelayProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.2 |
mibanswerProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.3 |
mibdS3NetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.4 |
mibuds3NetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.5 |
mibcadslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.6 |
mibdadslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.7 |
mibsdslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.8 |
mibvdslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.9 |
mibdmtAlDslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.10 |
miboc3AtmNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.11 |
miblimSparingConfigProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.12 |
mibds3AtmNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.13 |
mibhdsl2NetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.14 |
mibe3AtmNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.15 |
mibredundancyProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.16 |
mibredundancyStatsProfile OBJECT IDENTIFIER .1.3.6.1.4.1.529.23.17 |
atmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.24 |
callLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.25 |
srvcMgmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.26 |
resourcesGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.27 |
voipGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.28 |
mgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.29 |
sparingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.30 |
cltmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.529.31 |