ASCEND-ADVANCED-AGENT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-ADVANCED-AGENT-MIB.
43
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
ASCEND-MIBSystem wide parameter dictating the use of trunk groups.ro Enumeration .1.3.6.1.4.1.529.4.20 |
wanLineTableThe wan line table. SEQUENCE OF WanLineEntry .1.3.6.1.4.1.529.4.21 |
wanLineEntryAn entry in the wan line table. WanLineEntry .1.3.6.1.4.1.529.4.21.1 |
wanLineIfIndexThis value for this object is equal to the
value of ifIndex from the Interfaces table of
MIB II (RFC 1213).ro INTEGER .1.3.6.1.4.1.529.4.21.1.1 |
wanLineNameA textual name of the wanLine as assigned through
the menu sytem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.21.1.2 |
wanLineTypeOne of 'wanTypes'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.529.4.21.1.3 |
wanLineChannelsThe number of ds0 channels supported.ro INTEGER .1.3.6.1.4.1.529.4.21.1.4 |
wanLineStateThe state of the line.ro Enumeration .1.3.6.1.4.1.529.4.21.1.5 |
wanLineStateStringA textual representation of the wanLineState
as displayed by the menu sytem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.21.1.6 |
wanLineActiveChannelsThe number of switched DS0 channels of the line.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-switched-channel(3) and
with any following wanLineChannelState bs-clear-pending(8),
bs-dialing(9), bs-ringing(10),and bs-connected(11) for all the
entries in its wanLineChannelEntry table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.7 |
wanLineUsageThe usage of the line. SETting values are supported only for T1/E1
links. Only lu-disabled(3), lu-trunk(5), and lu-quiesced(6) for
T1/PRI are currently supported for SETs.rw Enumeration .1.3.6.1.4.1.529.4.21.1.8 |
wanLineHuntGrpPhoneNumber1The hunt group phone number associated with
the line. This entry is manually entered in the line
configurations options.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.21.1.9 |
wanLineHuntGrpPhoneNumber2The hunt group phone number associated with
the line. This entry is manually entered in the line
configurations options.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.21.1.10 |
wanLineHuntGrpPhoneNumber3The hunt group phone number associated with
the line. This entry is manually entered in the line
configurations options.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.21.1.11 |
wanLineAvailableChannelsThe number of DS0 channels of the line configured as Switched and
available for making or accepting calls.
This variable counts the number of wanLineChannels with the
wanLineChannelState of bs-idle(7) for all the entries in its
wanLineChannelEntry table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.12 |
wanLineSwitchedChannelsThe number of DS0 channels of the line configured as switched.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-switched-channel(3) and
with wanLineChannelState not bs-disabled(18) for all the entries
in its wanLineChannelEntry table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.13 |
wanLineDisabledChannelsThe number of disabled DS0 channels of the line.
This variable counts the number of wanLineChannels with the
wanLineChannelState of bs-disabled(18) and with any
wanLineChannelUsage for all the entries in its wanLineChannelEntry
table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.14 |
wanLineNailedChannelsThe number of DS0 channels of the line configured as nailed.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-clear-64(5) and with
wanLineChannelState not bs-disabled(18) for all the entries in its
wanLineChannelEntry table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.15 |
wanLineOutOfServiceChannelsThe number of out-of-service DS0 channels of the line.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-switched-channel and
wanLineChannelState of bs-unavailable(2), bs-out-of-service(4),
bs-maintenance(16) for all the entries in its wanLineChannelEntry
table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.16 |
wanLineNet2NetChannelsThe number of NET2NET DS0 channels of the line.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-switched-channel and
wanLineChannelState of bs-net2net-dialing, bs-net2net-ringing and
bs-net2net-connected for all the entries in its wanLineChannelEntry
table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.17 |
wanLineDtptChannelsThe number of DTPT DS0 channels of the line.
This variable counts the number of wanLineChannels on an enabled
line with the wanLineChannelUsage of ds0-switched-channel and
wanLineChannelState of bs-dtpt-dialing, bs-dtpt-ringing and
bs-dtpt-connected for all the entries in its wanLineChannelEntry
table.ro INTEGER .1.3.6.1.4.1.529.4.21.1.18 |
wanLineChannelTableThe wan line table. SEQUENCE OF WanLineChannelEntry .1.3.6.1.4.1.529.4.22 |
wanLineChannelEntryAn entry in the wan line table. WanLineChannelEntry .1.3.6.1.4.1.529.4.22.1 |
wanLineChannelIfIndexThis value for this object is equal to the
value of ifIndex from the Interfaces table of
MIB II (RFC 1213).ro INTEGER .1.3.6.1.4.1.529.4.22.1.1 |
wanLineChannelIndexThe ds0 channel number with the line.ro INTEGER .1.3.6.1.4.1.529.4.22.1.2 |
wanLineChannelStateThe state of the ds0 channel.ro Enumeration .1.3.6.1.4.1.529.4.22.1.3 |
wanLineChannelStateStringA textual representation of the wanLineChannelState
as displayed by the menu sytem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.22.1.4 |
wanLineChannelErrorCountThe error count encountered on the channel.ro INTEGER .1.3.6.1.4.1.529.4.22.1.5 |
wanLineChannelUsageThe usage for this ds0 channel.ro Enumeration .1.3.6.1.4.1.529.4.22.1.6 |
wanLineChannelTrunkGroupThe trunk group assigned to this channel.
Note: This attribute returns 0 if
wanUseTrunkGroup is set to do-not-use(1).ro INTEGER .1.3.6.1.4.1.529.4.22.1.7 |
wanLineChannelPhoneNumberThe phone number of this channel. This is the number
sent to the far end in an inverse multiplexed call when
instructing the far end to add more bandwidth.
The number should contain the minimum number of digits
to identify the channel. If the channel is part
of a hunt group, the phone number should be blank.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.529.4.22.1.8 |
wanLineChannelSlotA slot number for routing incoming
calls associated with the channel. A slot-port number
zero means calls arriving on this channel can be
routed to any port.ro INTEGER .1.3.6.1.4.1.529.4.22.1.9 |
wanLineChannelPortA port number for routing incoming
calls associated with the channel. A slot-port number
zero means calls arriving on this channel can be
routed to any port.ro INTEGER .1.3.6.1.4.1.529.4.22.1.10 |
wanLineChannelNailedStateThe nailed group associated with the channel.ro Enumeration .1.3.6.1.4.1.529.4.22.1.11 |
wanAvailableChannelsThe sum of wanLineAvailableChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.23 |
wanSwitchedChannelsThe sum of wanLineSwitchedChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.24 |
wanDisabledChannelsThe sum of wanLineDisabledChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.25 |
wanActiveChannelsThe sum of wanLineActiveChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.26 |
wanNailedChannelsThe sum of wanLineNailedChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.27 |
wanOutOfServiceChannelsThe sum of wanLineOutOfChannels for all lines.ro INTEGER .1.3.6.1.4.1.529.4.28 |
wanLineChannelUsageTableTable of channel state summaries per line type. SEQUENCE OF WanLineChannelUsageEntry .1.3.6.1.4.1.529.4.29 |
wanLineChannelUsageEntryAn entry in the channel state summary table for the given
wanLineUsage and wanLineChannelState. WanLineChannelUsageEntry .1.3.6.1.4.1.529.4.29.1 |
wanLineChannelUsageCountThe count of channels in the selected wanLineChannelState for the
selected wanLineUsage.ro INTEGER .1.3.6.1.4.1.529.4.29.1.1 |