ASCEND-MIBT1NET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBT1NET-MIB.
220
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
220 total| Object Name |
|---|
mibt1NetworkProfileV1 OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.126 |
mibt1NetworkProfileV1TableA list of mibt1NetworkProfile_v1 profile entries. SEQUENCE OF Mibt1NetworkProfileV1Entry .1.3.6.1.4.1.4253.1.126.1 |
mibt1NetworkProfileV1EntryA mibt1NetworkProfile_v1 entry containing objects that
maps to the parameters of mibt1NetworkProfile_v1 profile. Mibt1NetworkProfileV1Entry .1.3.6.1.4.1.4253.1.126.1.1 |
t1NetworkProfileV1-ProfileNumberFor potential backwards compatibility. The current design consists of one line profile numbered 0.rw INTEGER .1.3.6.1.4.1.4253.1.126.1.1.1 |
t1NetworkProfileV1-NameName of DS1 line.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.1.1.2 |
t1NetworkProfileV1-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.3 |
t1NetworkProfileV1-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.4 |
t1NetworkProfileV1-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.126.1.1.5 |
t1NetworkProfileV1-BackToBackIndicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.6 |
t1NetworkProfileV1-PrimaryChannelUsageThis is the use of the first T1 interface.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.7 |
t1NetworkProfileV1-SecondaryChannelUsageThe Multiband uses the first T1 interface as the primary interface and treats the secondary interface special. This is the use of the second interface.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.8 |
t1NetworkProfileV1-TertiaryChannelUsageThis is the use of the 3rd T1 interface.rw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.9 |
t1NetworkProfileV1-Action-orw Enumeration .1.3.6.1.4.1.4253.1.126.1.1.10 |
mibt1NetworkProfileV1-LineInterfaceTableA list of mibt1NetworkProfile_v1__line_interface profile entries. SEQUENCE OF Mibt1NetworkProfileV1-LineInterfaceEntry .1.3.6.1.4.1.4253.1.126.2 |
mibt1NetworkProfileV1-LineInterfaceEntryA mibt1NetworkProfile_v1__line_interface entry containing objects that
maps to the parameters of mibt1NetworkProfile_v1__line_interface profile. Mibt1NetworkProfileV1-LineInterfaceEntry .1.3.6.1.4.1.4253.1.126.2.1 |
t1NetworkProfileV1-LineInterface-Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.1 |
t1NetworkProfileV1-LineInterface-Index-oro INTEGER .1.3.6.1.4.1.4253.1.126.2.1.2 |
t1NetworkProfileV1-LineInterface-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.3 |
t1NetworkProfileV1-LineInterface-TOnlineTypeThe tonline type of an e1 line.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.4 |
t1NetworkProfileV1-LineInterface-FrameTypeThe super-framing mode that is used on the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.5 |
t1NetworkProfileV1-LineInterface-EncodingThe layer 1 line encoding used for the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.6 |
t1NetworkProfileV1-LineInterface-ClockSourcerw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.7 |
t1NetworkProfileV1-LineInterface-ClockPriorityClock priority assigned to the T1 line. Used to select particular lines as clock source.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.8 |
t1NetworkProfileV1-LineInterface-SignalingModeInband, ISDN, ISDN_NFAS, PBX or SS7 signaling.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.9 |
t1NetworkProfileV1-LineInterface-IsdnEmulationSideSide the line will emulate: TE (user), or NT (network).rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.10 |
t1NetworkProfileV1-LineInterface-RobbedBitModeWink start, idle start, incoming wink.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.11 |
t1NetworkProfileV1-LineInterface-DefaultCallTypeSpecify the default call-type for incoming calls, for purposes of call routing and signalling.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.12 |
t1NetworkProfileV1-LineInterface-SwitchTypeThe network switch type, needed for ISDN/NFAS signaling.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.13 |
t1NetworkProfileV1-LineInterface-NfasGroupIdFor NFAS lines: the nfas group id. Not used with robbed bit signaling.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.14 |
t1NetworkProfileV1-LineInterface-NfasIdFor NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.15 |
t1NetworkProfileV1-LineInterface-IncomingCallHandlingThis parameter is used to determine the type of processing required for incoming calls from this line.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.16 |
t1NetworkProfileV1-LineInterface-DeleteDigitsNumber of digits to delete from numbers received from a PBX.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.17 |
t1NetworkProfileV1-LineInterface-AddDigitStringString of digits to prepend to phone number received from PBX.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.18 |
t1NetworkProfileV1-LineInterface-CallByCallCall-by-call value to set when routing calls from PBX to network.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.19 |
t1NetworkProfileV1-LineInterface-PbxAnswerNumberThe answer number that is the equivalent of a port answer-number used for the network to pbx routing.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.20 |
t1NetworkProfileV1-LineInterface-AnswerServiceThe switched service type (or none) that is used for routing network calls to the pbx.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.21 |
t1NetworkProfileV1-LineInterface-oPBXTypeThe PBX Class as defined in the enumeration above.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.22 |
t1NetworkProfileV1-LineInterface-DataSenseD-channel normal or inverted data. Currently unused (normal data is always selected.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.23 |
t1NetworkProfileV1-LineInterface-IdleModeD-channel mark or flag idle. Currently unused (flag idle is always selected.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.24 |
t1NetworkProfileV1-LineInterface-oFDLWho's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.25 |
t1NetworkProfileV1-LineInterface-FrontEndTypeThe front end type (CSU/DSX) of the T1 transceiver.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.26 |
t1NetworkProfileV1-LineInterface-oDSXLineLengthThe length of the physical T1 line (for DSX lines).rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.27 |
t1NetworkProfileV1-LineInterface-oCSUBuildOutLine buildout value for CSU lines.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.28 |
t1NetworkProfileV1-LineInterface-OverlapReceivingTRUE if overlap receiving procedure may be used to handle incoming call, FALSE if notrw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.29 |
t1NetworkProfileV1-LineInterface-PriPrefixNumberThe unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.30 |
t1NetworkProfileV1-LineInterface-TrailingDigitsNumber of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.31 |
t1NetworkProfileV1-LineInterface-T302TimerNumber of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.32 |
t1NetworkProfileV1-LineInterface-Layer3EndIf x-side, layer 3 favors outgoing call when a call collision occurs.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.33 |
t1NetworkProfileV1-LineInterface-Layer2EndThis parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.34 |
t1NetworkProfileV1-LineInterface-NlValueNumber of re-transmissions; default to 64.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.35 |
t1NetworkProfileV1-LineInterface-LoopAvoidanceLoop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.36 |
t1NetworkProfileV1-LineInterface-MaintenanceStateTRUE if the line is in user-requested maintenance mode, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.37 |
t1NetworkProfileV1-LineInterface-NumberCompleteThe criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.38 |
t1NetworkProfileV1-LineInterface-GroupBAnswerSignalThe group B signal to send prior to answering a call.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.39 |
t1NetworkProfileV1-LineInterface-GroupBBusySignalThe group B signal to send to reject a call.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.40 |
t1NetworkProfileV1-LineInterface-GroupBNoMatchSignalThe group B signal to send to reject a call with invalid call number.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.41 |
t1NetworkProfileV1-LineInterface-GroupBCollectSignalThe group B signal to send to answer/reject a collect call.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.42 |
t1NetworkProfileV1-LineInterface-GroupIiSignalThe group II signal to send after sending all address digits.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.43 |
t1NetworkProfileV1-LineInterface-InputSampleCountThe number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection resultrw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.44 |
t1NetworkProfileV1-LineInterface-AnswerDelayNumber of milliseconds to wait before answering an incoming R2 call.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.45 |
t1NetworkProfileV1-LineInterface-CallerIdTRUE if the caller Id is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.46 |
t1NetworkProfileV1-LineInterface-LineSignalingThe line signaling of E1 line.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.47 |
t1NetworkProfileV1-LineInterface-Timer1CollectCallAdjustable between 0 ~ 2000msrw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.48 |
t1NetworkProfileV1-LineInterface-Timer2CollectCallAdjustable between 10 ~ 2000msrw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.49 |
t1NetworkProfileV1-LineInterface-SendDiscValNumber of seconds before sending ISDN disconnect to switch. 0 means disable.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.50 |
t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.51 |
t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.52 |
t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.2.1.53 |
t1NetworkProfileV1-LineInterface-PriTypeOfNumberPRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.54 |
t1NetworkProfileV1-LineInterface-PriNumberingPlanIdPRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.55 |
t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumberThe line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.56 |
t1NetworkProfileV1-LineInterface-CollectIncomingDigitsTRUE collect incoming called/calling digits, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.57 |
t1NetworkProfileV1-LineInterface-T1InterDigitTimeoutInter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.58 |
t1NetworkProfileV1-LineInterface-R1UseAnirTRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.59 |
t1NetworkProfileV1-LineInterface-R1FirstDigitTimerThe timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.60 |
t1NetworkProfileV1-LineInterface-R1AnirDelayDelay in milliseconds between receiving ST and sending ANIR signal.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.61 |
t1NetworkProfileV1-LineInterface-R1AnirTimerTime in milliseconds of ANIR signal.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.62 |
t1NetworkProfileV1-LineInterface-R1ModifiedUse R1 modified signaling. Default is FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.63 |
t1NetworkProfileV1-LineInterface-FirstDs0When using fractional T1/E1 the first DS0 used. Default is 1rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.64 |
t1NetworkProfileV1-LineInterface-LastDs0When using fractional T1/E1 the last DS0 used. Default is 24rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.65 |
t1NetworkProfileV1-LineInterface-NailedGroupA number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.66 |
t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedureProcedure used for incoming continuity check on this line.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.67 |
t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedureProcedure used for outgoing continuity check on this line.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.68 |
t1NetworkProfileV1-LineInterface-LineProvisionLine Provision.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.69 |
t1NetworkProfileV1-LineInterface-Gr303ModeGR-303 Mode.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.70 |
t1NetworkProfileV1-LineInterface-Gr303GroupIdFor GR303 lines: the interface group id.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.71 |
t1NetworkProfileV1-LineInterface-Gr303Ds1IdFor GR303 lines: The logical DS1 id.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.72 |
t1NetworkProfileV1-LineInterface-SwitchVersionSwitch Version.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.73 |
t1NetworkProfileV1-LineInterface-GroupBNoChargeSignalThe group B signal to send if subscriber line is idle / no chargerw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.74 |
t1NetworkProfileV1-LineInterface-StatusChangeTrapEnableWhen set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.75 |
t1NetworkProfileV1-LineInterface-DownTransDelayTo control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.76 |
t1NetworkProfileV1-LineInterface-UpTransDelayTo control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.77 |
t1NetworkProfileV1-LineInterface-NetworkSpecificFacilitiesNetwork Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.rw INTEGER .1.3.6.1.4.1.4253.1.126.2.1.79 |
t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnableWhen set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.rw Enumeration .1.3.6.1.4.1.4253.1.126.2.1.80 |
mibt1NetworkProfileV1-LineInterface-ChannelConfigTableA list of mibt1NetworkProfile_v1__line_interface__channel_config profile entries. SEQUENCE OF Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry .1.3.6.1.4.1.4253.1.126.3 |
mibt1NetworkProfileV1-LineInterface-ChannelConfigEntryA mibt1NetworkProfile_v1__line_interface__channel_config entry containing objects that
maps to the parameters of mibt1NetworkProfile_v1__line_interface__channel_config profile. Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry .1.3.6.1.4.1.4253.1.126.3.1 |
t1NetworkProfileV1-LineInterface-ChannelConfig-Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.3.1.1 |
t1NetworkProfileV1-LineInterface-ChannelConfig-Index-oro INTEGER .1.3.6.1.4.1.4253.1.126.3.1.2 |
t1NetworkProfileV1-LineInterface-ChannelConfig-Index1-oro INTEGER .1.3.6.1.4.1.4253.1.126.3.1.3 |
t1NetworkProfileV1-LineInterface-ChannelConfig-ChannelUsageThe usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.rw Enumeration .1.3.6.1.4.1.4253.1.126.3.1.4 |
t1NetworkProfileV1-LineInterface-ChannelConfig-TrunkGroupThe trunk group assigned to this channel.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.5 |
t1NetworkProfileV1-LineInterface-ChannelConfig-PhoneNumberThe phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.126.3.1.6 |
t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumberrw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.7 |
t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumberTNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.8 |
t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumberrw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.9 |
t1NetworkProfileV1-LineInterface-ChannelConfig-NailedGroupA number that identifies the set of channels that makes up a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.13 |
t1NetworkProfileV1-LineInterface-ChannelConfig-ChanGroupA number that identifies the channel-group to which this channel belongs.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.14 |
t1NetworkProfileV1-LineInterface-ChannelConfig-DestChanGroupA number that identifies the channel-group to which any incoming calls on this channel will be directed.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.15 |
t1NetworkProfileV1-LineInterface-ChannelConfig-DialPlanNumberA number that identifies the dial plan from the dial plan menu.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.16 |
t1NetworkProfileV1-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigitsThe number of leading digits in the incoming phone number to use for selecting the Dial Plan.rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.17 |
t1NetworkProfileV1-LineInterface-ChannelConfig-IdlePatternThe idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)rw INTEGER .1.3.6.1.4.1.4253.1.126.3.1.18 |
mibt1NetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.127 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.127 |
mibt1NetworkProfileTableA list of mibt1NetworkProfile profile entries. SEQUENCE OF Mibt1NetworkProfileEntry .1.3.6.1.4.1.4253.1.127.1 |
mibt1NetworkProfileEntryA mibt1NetworkProfile entry containing objects that
maps to the parameters of mibt1NetworkProfile profile. Mibt1NetworkProfileEntry .1.3.6.1.4.1.4253.1.127.1.1 |
t1NetworkProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.127.1.1.1 |
t1NetworkProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.127.1.1.2 |
t1NetworkProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.127.1.1.3 |
t1NetworkProfile-NameName of DS1 line.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.4 |
t1NetworkProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.5 |
t1NetworkProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.6 |
t1NetworkProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.7 |
t1NetworkProfile-LineInterface-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.8 |
t1NetworkProfile-LineInterface-TOnlineTypeThe tonline type of an e1 line.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.9 |
t1NetworkProfile-LineInterface-FrameTypeThe super-framing mode that is used on the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.10 |
t1NetworkProfile-LineInterface-EncodingThe layer 1 line encoding used for the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.11 |
t1NetworkProfile-LineInterface-ClockSourcerw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.12 |
t1NetworkProfile-LineInterface-ClockPriorityClock priority assigned to the T1 line. Used to select particular lines as clock source.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.13 |
t1NetworkProfile-LineInterface-SignalingModeInband, ISDN, ISDN_NFAS, PBX or SS7 signaling.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.14 |
t1NetworkProfile-LineInterface-IsdnEmulationSideSide the line will emulate: TE (user), or NT (network).rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.15 |
t1NetworkProfile-LineInterface-RobbedBitModeWink start, idle start, incoming wink.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.16 |
t1NetworkProfile-LineInterface-DefaultCallTypeSpecify the default call-type for incoming calls, for purposes of call routing and signalling.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.17 |
t1NetworkProfile-LineInterface-SwitchTypeThe network switch type, needed for ISDN/NFAS signaling.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.18 |
t1NetworkProfile-LineInterface-NfasGroupIdFor NFAS lines: the nfas group id. Not used with robbed bit signaling.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.19 |
t1NetworkProfile-LineInterface-NfasIdFor NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.20 |
t1NetworkProfile-LineInterface-IncomingCallHandlingThis parameter is used to determine the type of processing required for incoming calls from this line.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.21 |
t1NetworkProfile-LineInterface-DeleteDigitsNumber of digits to delete from numbers received from a PBX.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.22 |
t1NetworkProfile-LineInterface-AddDigitStringString of digits to prepend to phone number received from PBX.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.23 |
t1NetworkProfile-LineInterface-CallByCallCall-by-call value to set when routing calls from PBX to network.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.24 |
t1NetworkProfile-LineInterface-PbxAnswerNumberThe answer number that is the equivalent of a port answer-number used for the network to pbx routing.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.25 |
t1NetworkProfile-LineInterface-AnswerServiceThe switched service type (or none) that is used for routing network calls to the pbx.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.26 |
t1NetworkProfile-LineInterface-oPBXTypeThe PBX Class as defined in the enumeration above.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.27 |
t1NetworkProfile-LineInterface-DataSenseD-channel normal or inverted data. Currently unused (normal data is always selected.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.28 |
t1NetworkProfile-LineInterface-IdleModeD-channel mark or flag idle. Currently unused (flag idle is always selected.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.29 |
t1NetworkProfile-LineInterface-oFDLWho's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.30 |
t1NetworkProfile-LineInterface-FrontEndTypeThe front end type (CSU/DSX) of the T1 transceiver.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.31 |
t1NetworkProfile-LineInterface-oDSXLineLengthThe length of the physical T1 line (for DSX lines).rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.32 |
t1NetworkProfile-LineInterface-oCSUBuildOutLine buildout value for CSU lines.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.33 |
t1NetworkProfile-LineInterface-OverlapReceivingTRUE if overlap receiving procedure may be used to handle incoming call, FALSE if notrw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.34 |
t1NetworkProfile-LineInterface-PriPrefixNumberThe unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.35 |
t1NetworkProfile-LineInterface-TrailingDigitsNumber of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.36 |
t1NetworkProfile-LineInterface-T302TimerNumber of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.37 |
t1NetworkProfile-LineInterface-Layer3EndIf x-side, layer 3 favors outgoing call when a call collision occurs.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.38 |
t1NetworkProfile-LineInterface-Layer2EndThis parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.39 |
t1NetworkProfile-LineInterface-NlValueNumber of re-transmissions; default to 64.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.40 |
t1NetworkProfile-LineInterface-LoopAvoidanceLoop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.41 |
t1NetworkProfile-LineInterface-MaintenanceStateTRUE if the line is in user-requested maintenance mode, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.42 |
t1NetworkProfile-LineInterface-NumberCompleteThe criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.43 |
t1NetworkProfile-LineInterface-GroupBAnswerSignalThe group B signal to send prior to answering a call.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.44 |
t1NetworkProfile-LineInterface-GroupBBusySignalThe group B signal to send to reject a call.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.45 |
t1NetworkProfile-LineInterface-GroupBNoMatchSignalThe group B signal to send to reject a call with invalid call number.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.46 |
t1NetworkProfile-LineInterface-GroupBCollectSignalThe group B signal to send to answer/reject a collect call.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.47 |
t1NetworkProfile-LineInterface-GroupIiSignalThe group II signal to send after sending all address digits.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.48 |
t1NetworkProfile-LineInterface-InputSampleCountThe number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection resultrw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.49 |
t1NetworkProfile-LineInterface-AnswerDelayNumber of milliseconds to wait before answering an incoming R2 call.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.50 |
t1NetworkProfile-LineInterface-CallerIdTRUE if the caller Id is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.51 |
t1NetworkProfile-LineInterface-LineSignalingThe line signaling of E1 line.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.52 |
t1NetworkProfile-LineInterface-Timer1CollectCallAdjustable between 0 ~ 2000msrw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.53 |
t1NetworkProfile-LineInterface-Timer2CollectCallAdjustable between 10 ~ 2000msrw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.54 |
t1NetworkProfile-LineInterface-SendDiscValNumber of seconds before sending ISDN disconnect to switch. 0 means disable.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.55 |
t1NetworkProfile-LineInterface-HuntGrpPhoneNumber1The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.56 |
t1NetworkProfile-LineInterface-HuntGrpPhoneNumber2The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.57 |
t1NetworkProfile-LineInterface-HuntGrpPhoneNumber3The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.1.1.58 |
t1NetworkProfile-LineInterface-PriTypeOfNumberPRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.59 |
t1NetworkProfile-LineInterface-PriNumberingPlanIdPRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.60 |
t1NetworkProfile-LineInterface-SuperFrameSrcLineNumberThe line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.61 |
t1NetworkProfile-LineInterface-CollectIncomingDigitsTRUE collect incoming called/calling digits, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.62 |
t1NetworkProfile-LineInterface-T1InterDigitTimeoutInter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.63 |
t1NetworkProfile-LineInterface-R1UseAnirTRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.64 |
t1NetworkProfile-LineInterface-R1FirstDigitTimerThe timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.65 |
t1NetworkProfile-LineInterface-R1AnirDelayDelay in milliseconds between receiving ST and sending ANIR signal.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.66 |
t1NetworkProfile-LineInterface-R1AnirTimerTime in milliseconds of ANIR signal.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.67 |
t1NetworkProfile-LineInterface-R1ModifiedUse R1 modified signaling. Default is FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.68 |
t1NetworkProfile-LineInterface-FirstDs0When using fractional T1/E1 the first DS0 used. Default is 1rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.69 |
t1NetworkProfile-LineInterface-LastDs0When using fractional T1/E1 the last DS0 used. Default is 24rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.70 |
t1NetworkProfile-LineInterface-NailedGroupA number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.71 |
t1NetworkProfile-LineInterface-Ss7Continuity-IncomingProcedureProcedure used for incoming continuity check on this line.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.72 |
t1NetworkProfile-LineInterface-Ss7Continuity-OutgoingProcedureProcedure used for outgoing continuity check on this line.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.73 |
t1NetworkProfile-LineInterface-LineProvisionLine Provision.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.74 |
t1NetworkProfile-LineInterface-Gr303ModeGR-303 Mode.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.75 |
t1NetworkProfile-LineInterface-Gr303GroupIdFor GR303 lines: the interface group id.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.76 |
t1NetworkProfile-LineInterface-Gr303Ds1IdFor GR303 lines: The logical DS1 id.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.77 |
t1NetworkProfile-LineInterface-SwitchVersionSwitch Version.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.78 |
t1NetworkProfile-BackToBackIndicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.79 |
t1NetworkProfile-ChannelUsageThis is the use of the first T1 interface.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.80 |
t1NetworkProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.81 |
t1NetworkProfile-LineInterface-GroupBNoChargeSignalThe group B signal to send if subscriber line is idle / no chargerw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.82 |
t1NetworkProfile-LineInterface-StatusChangeTrapEnableWhen set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.83 |
t1NetworkProfile-LineInterface-DownTransDelayTo control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.84 |
t1NetworkProfile-LineInterface-UpTransDelayTo control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.85 |
t1NetworkProfile-LineInterface-NetworkSpecificFacilitiesNetwork Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.rw INTEGER .1.3.6.1.4.1.4253.1.127.1.1.87 |
t1NetworkProfile-LineInterface-CauseCodeVerificationEnableWhen set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.rw Enumeration .1.3.6.1.4.1.4253.1.127.1.1.88 |
mibt1NetworkProfile-LineInterface-ChannelConfigTableA list of mibt1NetworkProfile__line_interface__channel_config profile entries. SEQUENCE OF Mibt1NetworkProfile-LineInterface-ChannelConfigEntry .1.3.6.1.4.1.4253.1.127.2 |
mibt1NetworkProfile-LineInterface-ChannelConfigEntryA mibt1NetworkProfile__line_interface__channel_config entry containing objects that
maps to the parameters of mibt1NetworkProfile__line_interface__channel_config profile. Mibt1NetworkProfile-LineInterface-ChannelConfigEntry .1.3.6.1.4.1.4253.1.127.2.1 |
t1NetworkProfile-LineInterface-ChannelConfig-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.127.2.1.1 |
t1NetworkProfile-LineInterface-ChannelConfig-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.127.2.1.2 |
t1NetworkProfile-LineInterface-ChannelConfig-Item-oro INTEGER .1.3.6.1.4.1.4253.1.127.2.1.3 |
t1NetworkProfile-LineInterface-ChannelConfig-Index-oro INTEGER .1.3.6.1.4.1.4253.1.127.2.1.4 |
t1NetworkProfile-LineInterface-ChannelConfig-ChannelUsageThe usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.rw Enumeration .1.3.6.1.4.1.4253.1.127.2.1.5 |
t1NetworkProfile-LineInterface-ChannelConfig-TrunkGroupThe trunk group assigned to this channel.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.6 |
t1NetworkProfile-LineInterface-ChannelConfig-PhoneNumberThe phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.127.2.1.7 |
t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumberrw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.8 |
t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumberTNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.9 |
t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumberrw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.10 |
t1NetworkProfile-LineInterface-ChannelConfig-NailedGroupA number that identifies the set of channels that makes up a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.14 |
t1NetworkProfile-LineInterface-ChannelConfig-ChanGroupA number that identifies the channel-group to which this channel belongs.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.15 |
t1NetworkProfile-LineInterface-ChannelConfig-DestChanGroupA number that identifies the channel-group to which any incoming calls on this channel will be directed.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.16 |
t1NetworkProfile-LineInterface-ChannelConfig-DialPlanNumberA number that identifies the dial plan from the dial plan menu.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.17 |
t1NetworkProfile-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigitsThe number of leading digits in the incoming phone number to use for selecting the Dial Plan.rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.18 |
t1NetworkProfile-LineInterface-ChannelConfig-IdlePatternThe idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)rw INTEGER .1.3.6.1.4.1.4253.1.127.2.1.19 |