Home/Catalog/ASCEND-MIBXAUTH-MIB

ASCEND-MIBXAUTH-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

155
Objects
Active
Status
3
Dependencies

Imported Objects

ASCEND-MIB
RFC1155-SMI
RFC-1212

Objects

155 total
Object Name
mibradStatProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.4253.1.141
mibradStatProfileTableA list of mibradStatProfile profile entries.
SEQUENCE OF MibradStatProfileEntry
.1.3.6.1.4.1.4253.1.141.1
mibradStatProfileEntryA mibradStatProfile entry containing objects that maps to the parameters of mibradStatProfile profile.
MibradStatProfileEntry
.1.3.6.1.4.1.4253.1.141.1.1
radStatProfile-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.141.1.1.1
radStatProfile-CurrentAuthServerThe index of the current RADIUS authentication server.ro
INTEGER
.1.3.6.1.4.1.4253.1.141.1.1.2
radStatProfile-CurrentAcctServerThe index of the current RADIUS accounting server.ro
INTEGER
.1.3.6.1.4.1.4253.1.141.1.1.3
radStatProfile-Action-orw
Enumeration
.1.3.6.1.4.1.4253.1.141.1.1.4
mibexternalAuthProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.4253.1.142
RFC1155-SMI
Unknown
.1.3.6.1.4.1.4253.1.142
mibexternalAuthProfileTableA list of mibexternalAuthProfile profile entries.
SEQUENCE OF MibexternalAuthProfileEntry
.1.3.6.1.4.1.4253.1.142.1
mibexternalAuthProfileEntryA mibexternalAuthProfile entry containing objects that maps to the parameters of mibexternalAuthProfile profile.
MibexternalAuthProfileEntry
.1.3.6.1.4.1.4253.1.142.1.1
externalAuthProfile-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.1
externalAuthProfile-AuthTypeThe type of authentication to perform.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.2
externalAuthProfile-AcctTypeThe type of accounting to perform.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.3
externalAuthProfile-RadServEnableWhether or not the on-board RADIUS server is enabled.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.4
externalAuthProfile-RadAuthClient-AuthPortThe UDP destination port to use for RADIUS authentication.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.8
externalAuthProfile-RadAuthClient-AuthSrcPortThe UDP source port to use for RADIUS authentication. If zero, the source port is selected from the non-privileged port range (1024-2000).rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.9
externalAuthProfile-RadAuthClient-AuthKeyThe RADIUS authentication access key shared with the RADIUS server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.10
externalAuthProfile-RadAuthClient-AuthPoolIf TRUE an IP address is allocated from the default pool and passed to the RADIUS server during RADIUS authentication. This address may be assigned to the dial-in user for the duration of the connection.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.11
externalAuthProfile-RadAuthClient-AuthTimeoutNumber of seconds between retries to the authentication host.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.12
externalAuthProfile-RadAuthClient-AuthRspRequiredWhen set to Yes, entry is allowed only if the authentication server responds with an authentication of the login information. When set to No, entry is also allowed if there is no response from the authentication server. This field is used only for CLID or DNIS authentication.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.13
externalAuthProfile-RadAuthClient-AuthIdFailReturnBusyReturn busy instead of normal call clearing when id authentication fails.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.14
externalAuthProfile-RadAuthClient-AuthIdTimeoutReturnBusyReturn busy instead of normal call clearing when external id authentication fails.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.15
externalAuthProfile-RadAuthClient-AuthSessIntervalSend the number-of-sessions-per-Class Attribute to the authentication server every auth-sess-interval seconds.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.16
externalAuthProfile-RadAuthClient-AuthTSSecureAllow access to terminal server when RADIUS Login-Host is not specify when authTSsecure is set norw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.17
externalAuthProfile-RadAuthClient-AuthSend67If Yes, default attributes 6,7 of Radius and send them in the authentication request.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.18
externalAuthProfile-RadAuthClient-AuthFrmAdrStartSet Yes to send a second Radius accounting start record when the Framed-Address is assigned. Default No for backward compatibility.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.19
externalAuthProfile-RadAuthClient-AuthBootHostThe IP address of the authentication boot host.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.20
externalAuthProfile-RadAuthClient-AuthBootHost2The IP address of the secondary authentication boot host.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.21
externalAuthProfile-RadAuthClient-AuthBootPortThe UDP port to use for RADIUS authentication.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.22
externalAuthProfile-RadAuthClient-AuthResetTimeThe time to reset to the primary server after it has failed.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.23
externalAuthProfile-RadAuthClient-AuthIdMaxRetryTimeMaximum time limit to spend retrying RADIUS servers when in id authentication, a value of 0 sets the limit to the internal default value.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.24
externalAuthProfile-RadAuthClient-AuthRadiusCompatAuthentication RADIUS compatibility mode.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.25
externalAuthProfile-RadAuthClient-AuthKeepUserNameAction if the Access-Accept packet from Radius server contains a User-Name attribute.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.26
externalAuthProfile-RadAuthClient-AuthRealmDelimitersCharacters that delimit a realm and user name (used only if auth-keep-user-name=keep-realm-name or radius-delim_count>0)rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.27
externalAuthProfile-RadAuthClient-IdAuthPrefixA short text string prepended to the username portion of a CLID or DNIS authentication request.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.28
externalAuthProfile-RadAuthClient-AllowAuthConfigRqstsSet Yes to send External Config Requests. Default is set to Yes.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.29
externalAuthProfile-RadAuthClient-AuthReqDelimCountNumber of delimiters to strip from a username in Radius Auth request.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.30
externalAuthProfile-RadAuthClient-AuthReqStripSideSide to strip chars from a username in a Radius Auth request if delim-count is > 0.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.31
externalAuthProfile-RadAcctClient-AcctPortThe UDP destination port to use for RADIUS accounting.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.35
externalAuthProfile-RadAcctClient-AcctSrcPortThe UDP source port to use for RADIUS accounting. If zero, the source port is selected from the non-privileged port range (1024-2000).rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.36
externalAuthProfile-RadAcctClient-AcctKeyThe RADIUS accounting access key shared with the RADIUS server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.37
externalAuthProfile-RadAcctClient-AcctTimeoutNumber of seconds to wait for a response to previous accounting request.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.38
externalAuthProfile-RadAcctClient-AcctSessIntervalSend the number-of-sessions-per-Class Attribute to the accounting server every acct-sess-interval seconds.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.39
externalAuthProfile-RadAcctClient-AcctIdBaseThe base value to use in reporting Account ID.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.40
externalAuthProfile-RadAcctClient-AcctResetTimeThe elapsed time to reset to the primary server, after failing to reach the primary server.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.41
externalAuthProfile-RadAcctClient-AcctCheckpointInterval at which to send checkpoint packets to the daemon in minutes.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.42
externalAuthProfile-RadAcctClient-AcctCheckpointTimerSets the scope of the checkpoint timer to individual sessions or all-sessions.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.43
externalAuthProfile-RadAcctClient-AcctStopOnlySend to RADIUS Accounting Stop packets that have username=0. These are caused by connections that are dropped before authentication is done.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.44
externalAuthProfile-RadAcctClient-AcctLimitRetryNumber of retries before removing RADIUS Acct packet. 0 means leave on retry list until maximum retry entries are exceeded.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.45
externalAuthProfile-RadAcctClient-AcctDropStopOnAuthFailIf Yes, do not send RADIUS Accounting Stop/Checkpoint packets for users that failed authentication.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.46
externalAuthProfile-RadAcctClient-AcctRadiusCompatAccounting RADIUS compatibility mode.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.47
externalAuthProfile-RadAcctClient-TunnelAccountingPerform RFC2867 Radius Tunnel Accounting ( L2F, L2TP ).rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.48
externalAuthProfile-RadAuthServer-AuthPortThe UDP port to use for the on-board RADIUS server.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.49
externalAuthProfile-RadAuthServer-AuthSessionKeyEnables Session key assignments.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.50
externalAuthProfile-RadAuthServer-AuthAttributeTypeThe type of attributes required for session matching.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.51
externalAuthProfile-RadAuthServer-AuthRadiusCompatRADIUS server RADIUS compatibility mode.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.52
externalAuthProfile-TacAuthClient-AuthServer1The IP address of the first TACACS authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.53
externalAuthProfile-TacAuthClient-AuthServer2The IP address of the second TACACS authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.54
externalAuthProfile-TacAuthClient-AuthServer3The IP address of the third TACACS authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.55
externalAuthProfile-TacAuthClient-AuthPortThe UDP port to use for TACACS authentication.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.56
externalAuthProfile-TacAuthClient-AuthSrcPortThe UDP source port to use for TACACS authentication. If zero, the source port is selected from the non-privileged port range (1024-2000).rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.57
externalAuthProfile-TacAuthClient-AuthKeyThe RADIUS authentication access key shared with the RADIUS server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.58
externalAuthProfile-TacAuthClient-AuthTimeoutNumber of seconds between retries to the authentication host.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.59
externalAuthProfile-TacplusAuthClient-AuthServer1The IP address of the first TACACS+ authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.60
externalAuthProfile-TacplusAuthClient-AuthServer2The IP address of the second TACACS+ authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.61
externalAuthProfile-TacplusAuthClient-AuthServer3The IP address of the third TACACS+ authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.62
externalAuthProfile-TacplusAuthClient-AuthPortThe TCP destination port to use for TACACS+ authentication.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.63
externalAuthProfile-TacplusAuthClient-AuthSrcPortThe TCP source port to use for TACACS+ authentication. If zero, the source port is selected from the non-privileged port range (1024-2000).rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.64
externalAuthProfile-TacplusAuthClient-AuthKeyThe Tacacs+ authentication access key shared with the TACACS+ server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.65
externalAuthProfile-TacplusAuthClient-AuthTimeoutTimeThe time to reset to the primary server after it has failed.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.66
externalAuthProfile-TacplusAuthClient-AuthRetriesThe number of times to retry the auth hosts before giving up.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.67
externalAuthProfile-TacplusAcctClient-AcctServer1The IP address of the first TACACS+ accounting server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.68
externalAuthProfile-TacplusAcctClient-AcctServer2The IP address of the second TACACS+ accounting server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.69
externalAuthProfile-TacplusAcctClient-AcctServer3The IP address of the third TACACS+ accounting server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.70
externalAuthProfile-TacplusAcctClient-AcctPortThe TCP destination port to use for TACACS+ accounting.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.71
externalAuthProfile-TacplusAcctClient-AcctSrcPortThe TCP source port to use for TACACS+ accounting. If zero, the source port is selected from the non-privileged port range (1024-2000).rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.72
externalAuthProfile-TacplusAcctClient-AcctKeyThe TACACS+ accounting access key shared with the TACACS+ server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.73
externalAuthProfile-SecureidAuthClient-AuthServer1The IP address of the first authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.74
externalAuthProfile-SecureidAuthClient-AuthServer2The IP address of the second authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.75
externalAuthProfile-SecureidAuthClient-AuthServer3The IP address of the third authentication server.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.1.1.76
externalAuthProfile-SecureidAuthClient-AuthPortThe UDP destination port to use for authentication.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.77
externalAuthProfile-SecureidAuthClient-AuthTimeoutNumber of seconds between retries to the authentication host.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.78
externalAuthProfile-SecureidAuthClient-AuthRetrycountNumber of times to retry an authentication attempt.rw
INTEGER
.1.3.6.1.4.1.4253.1.142.1.1.79
externalAuthProfile-SecureidAuthClient-AuthDesUse DES encryption instead of native encryption.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.80
externalAuthProfile-SecureidAuthClient-AuthNodeSecretnode secret assigned to this router, hexadecimal notation.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.81
externalAuthProfile-PasswordProfile-ClidThis is the password for the CLID pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.82
externalAuthProfile-PasswordProfile-DnisThis is the password for the DNIS pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.83
externalAuthProfile-PasswordProfile-BannerThis is the password for the Banner pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.84
externalAuthProfile-PasswordProfile-InitBannerAuthenticate DNIS using this password.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.85
externalAuthProfile-PasswordProfile-PoolThis is the password for the POOLs pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.86
externalAuthProfile-PasswordProfile-FrdlThis is the password for the Frame Relay pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.87
externalAuthProfile-PasswordProfile-DialoutThis is the password for the Dialout pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.88
externalAuthProfile-PasswordProfile-DialoutRoutesThis is the password for the Dialout Routes pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.89
externalAuthProfile-PasswordProfile-DialoutIpxRoutesThis is the password for the Dialout IPX pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.90
externalAuthProfile-PasswordProfile-DialoutAtalkRoutesThis is the password for the Dialout Appletalk pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.91
externalAuthProfile-PasswordProfile-SourceAuthThis is the password for the Source Auth pseudo user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.92
externalAuthProfile-LocalProfilesFirstAuthenticate using local profiles first.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.93
externalAuthProfile-Noattr6UseTermsrvUsing terminal server if attribute 6 is missing from RADIUS authentication.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.94
externalAuthProfile-ClidAuthenticate CLID using this password.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.95
externalAuthProfile-DnisAuthenticate DNIS using this password.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.96
externalAuthProfile-Action-orw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.97
externalAuthProfile-RadAuthClient-AuthNetworkRouteServerDetermines whether Radius server supports multiple profiles with the same user-name. Otherwise destination IP address is appended to user-name.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.98
externalAuthProfile-RadAuthClient-IdAuthPrefixX25A short text string prepended to the username portion of a DNIS authentication request for X25 calls.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.99
externalAuthProfile-CliUserAuthAuthenticate the user Locally or Externally in the sequence specified by this filed.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.100
externalAuthProfile-RadAuthClient-AllowUnencryptedTunnelPasswordWhen set to 'YES', unencrypted as well as encrypted Tunnel-Password, from RADIUS, is accepted. When set to 'NO' only encrypted Tunnel-Password, from RADIUS, is accepted. But as per RFC 2868 the Tunnel-Password MUST be encrypted by RADIUS before sending out.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.101
externalAuthProfile-RadAuthClient-AuthCliUserDnisPseudo DNIS number for CLI users. If set, this number is sent to RADIUS as DNIS. If not set, DNIS is not sent to RADIUS.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.102
externalAuthProfile-RadAuthClient-AllowNasPortTypeInCliUserAuthWhen set to 'NO', NAS_Port_Type attribute is NOT sent in the RADIUS authentication request packet while authenticating CLI users. Default is set to Yes.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.103
externalAuthProfile-RadAuthClient-AuthHost1The IP address/hostname of the first RADIUS authentication serverrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.104
externalAuthProfile-RadAuthClient-AuthHost2The IP address/hostname of the second RADIUS authentication serverrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.105
externalAuthProfile-RadAuthClient-AuthHost3The IP address/hostname of the third RADIUS authentication serverrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.106
externalAuthProfile-RadAcctClient-AcctHost1The IP address/hostname of the first RADIUS accounting server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.107
externalAuthProfile-RadAcctClient-AcctHost2The IP address/hostname of the second RADIUS accounting server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.108
externalAuthProfile-RadAcctClient-AcctHost3The IP address/hostname of the third RADIUS accounting server.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.1.1.109
externalAuthProfile-RadAcctClient-VoipAccountingTo Enable/Disable radius accounting for VOIP calls.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.110
externalAuthProfile-RadAcctClient-AcctOnSwitchoverDetermines whether Accounting-on packet with event Ascend-Controller-Switchover should be sent or not during switchover when syncing is enabled.rw
Enumeration
.1.3.6.1.4.1.4253.1.142.1.1.111
mibexternalAuthProfile-RadAuthServer-AuthKeyTableA list of mibexternalAuthProfile__rad_auth_server__auth_key profile entries.
SEQUENCE OF MibexternalAuthProfile-RadAuthServer-AuthKeyEntry
.1.3.6.1.4.1.4253.1.142.2
mibexternalAuthProfile-RadAuthServer-AuthKeyEntryA mibexternalAuthProfile__rad_auth_server__auth_key entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_key profile.
MibexternalAuthProfile-RadAuthServer-AuthKeyEntry
.1.3.6.1.4.1.4253.1.142.2.1
externalAuthProfile-RadAuthServer-AuthKey-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.2.1.1
externalAuthProfile-RadAuthServer-AuthKey-Index1-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.2.1.2
externalAuthProfile-RadAuthServer-AuthKeyThe on-board RADIUS server key, shared with the RADIUS clients.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.142.2.1.3
mibexternalAuthProfile-RadAuthServer-AuthNetmaskTableA list of mibexternalAuthProfile__rad_auth_server__auth_netmask profile entries.
SEQUENCE OF MibexternalAuthProfile-RadAuthServer-AuthNetmaskEntry
.1.3.6.1.4.1.4253.1.142.3
mibexternalAuthProfile-RadAuthServer-AuthNetmaskEntryA mibexternalAuthProfile__rad_auth_server__auth_netmask entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_netmask profile.
MibexternalAuthProfile-RadAuthServer-AuthNetmaskEntry
.1.3.6.1.4.1.4253.1.142.3.1
externalAuthProfile-RadAuthServer-AuthNetmask-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.3.1.1
externalAuthProfile-RadAuthServer-AuthNetmask-Index1-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.3.1.2
externalAuthProfile-RadAuthServer-AuthNetmaskThe IP netmask of the RADIUS clients.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.3.1.3
mibexternalAuthProfile-RadAuthServer-AuthClientTableA list of mibexternalAuthProfile__rad_auth_server__auth_client profile entries.
SEQUENCE OF MibexternalAuthProfile-RadAuthServer-AuthClientEntry
.1.3.6.1.4.1.4253.1.142.4
mibexternalAuthProfile-RadAuthServer-AuthClientEntryA mibexternalAuthProfile__rad_auth_server__auth_client entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_client profile.
MibexternalAuthProfile-RadAuthServer-AuthClientEntry
.1.3.6.1.4.1.4253.1.142.4.1
externalAuthProfile-RadAuthServer-AuthClient-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.4.1.1
externalAuthProfile-RadAuthServer-AuthClient-Index1-oro
INTEGER
.1.3.6.1.4.1.4253.1.142.4.1.2
externalAuthProfile-RadAuthServer-AuthClientThe IP address of the RADIUS clients.rw
IpAddress
.1.3.6.1.4.1.4253.1.142.4.1.3
mibradAcctCallLogProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.4253.1.143
mibradAcctCallLogProfileTableA list of mibradAcctCallLogProfile profile entries.
SEQUENCE OF MibradAcctCallLogProfileEntry
.1.3.6.1.4.1.4253.1.143.1
mibradAcctCallLogProfileEntryA mibradAcctCallLogProfile entry containing objects that maps to the parameters of mibradAcctCallLogProfile profile.
MibradAcctCallLogProfileEntry
.1.3.6.1.4.1.4253.1.143.1.1
radAcctCallLogProfile-Index-oro
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.1
radAcctCallLogProfile-CallLogEnableEnable call log support.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.2
radAcctCallLogProfile-CallLogHost1The IP address of the first (RADIUS_ACCT) call log host.rw
IpAddress
.1.3.6.1.4.1.4253.1.143.1.1.3
radAcctCallLogProfile-CallLogHost2The IP address of the second (RADIUS_ACCT) call log host.rw
IpAddress
.1.3.6.1.4.1.4253.1.143.1.1.4
radAcctCallLogProfile-CallLogHost3The IP address of the third (RADIUS_ACCT) call log host.rw
IpAddress
.1.3.6.1.4.1.4253.1.143.1.1.5
radAcctCallLogProfile-CallLogPortThe UDP port to use for (RADIUS_ACCT) call log accounting.rw
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.6
radAcctCallLogProfile-CallLogKeyThe (RADIUS_ACCT) call log accounting key.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4253.1.143.1.1.7
radAcctCallLogProfile-CallLogTimeoutNumber of seconds to wait for a response to previous call log accounting request.rw
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.8
radAcctCallLogProfile-CallLogIdBaseThe Base to use in reporting Account ID.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.9
radAcctCallLogProfile-CallLogResetTimeThe timer to reset to the primary server(host-1) after current host is changed to host-2 or host-3. Value is in seconds. If value is 0, no timer is run.rw
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.10
radAcctCallLogProfile-CallLogStopOnlySend call log Stop packets that have username=0. These are caused by connections that are dropped before authentication is done.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.11
radAcctCallLogProfile-CallLogLimitRetryNumber of retries before removing call log packet. 0 means leave on retry list until maximum retry entries are exceeded.rw
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.12
radAcctCallLogProfile-CallLogRadiusCompatCall Logging RADIUS compatibility mode.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.13
radAcctCallLogProfile-CallLogServerIndexThe currently active call Logging server Index. The default factory setting is host-1.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.14
radAcctCallLogProfile-CallLogMultiPacketCall Logging MultiPacket Enable.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.15
radAcctCallLogProfile-CallLogStreamPeriodNumber of minutes between snapshots for stream pkts.rw
INTEGER
.1.3.6.1.4.1.4253.1.143.1.1.16
radAcctCallLogProfile-CallLogConnectionPacketsEnableEnable/Disable call logging START/STOP pkts when connection comes up or goes down. This is opposed to line statistics call logging which is always enabled.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.17
radAcctCallLogProfile-CallLogCsmModemDiagEnable CSM Modem diagnostics in Call Loggingrw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.18
radAcctCallLogProfile-Action-orw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.19
radAcctCallLogProfile-VoipCallLoggingTo Enable/Disable call logging for VOIP calls.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.20
radAcctCallLogProfile-CallLogSwitchoverDetermines whether Accounting-on packet with event Ascend-Control-Module-Switchover should be sent or not during switchover when syncing is enabled.rw
Enumeration
.1.3.6.1.4.1.4253.1.143.1.1.21