ASCEND-MIBTS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBTS-MIB.
92
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
mibtermSrvProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.133 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.133 |
mibtermSrvProfileTableA list of mibtermSrvProfile profile entries. SEQUENCE OF MibtermSrvProfileEntry .1.3.6.1.4.1.4253.1.133.1 |
mibtermSrvProfileEntryA mibtermSrvProfile entry containing objects that
maps to the parameters of mibtermSrvProfile profile. MibtermSrvProfileEntry .1.3.6.1.4.1.4253.1.133.1.1 |
termSrvProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.133.1.1.1 |
termSrvProfile-EnabledTerminal server availability flag. When set to no all terminal server functions are disabled.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.2 |
termSrvProfile-SecurityModeIndicates the type of terminal server security (if any).rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.3 |
termSrvProfile-ModemConfiguration-V42-mnpDescribes the modem error correction mode. Error correction can be required, not used, or optional.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.4 |
termSrvProfile-ModemConfiguration-MaxBaudRateDescribes the maximum connection baud rate the modems should try.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.5 |
termSrvProfile-ModemConfiguration-ModemTransmitLevelThe transmit attenuate level the modems should try.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.6 |
termSrvProfile-ModemConfiguration-CellModeFirstIf yes, the modem attempts cellular connection first - then land connection. If no, land based is attempted first, then cellular.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.7 |
termSrvProfile-ModemConfiguration-CellLevelThe modem cellular communications transmit and receive level. Valid values are -10 db .. -18 db.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.8 |
termSrvProfile-ModemConfiguration-o7EvenIf set to yes, all incoming data has its parity bit cleared and all outgoing data is forced to 7 bits with even parity.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.9 |
termSrvProfile-ModemConfiguration-ModemModThe modulation protocol to be attempted by the modems.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.10 |
termSrvProfile-ModemConfiguration-oATAnswerStringAllows the user to enter any additional AT commands in the modem answer string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.11 |
termSrvProfile-TerminalModeConfiguration-SilentModeDon't generate any status messages upon connection.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.12 |
termSrvProfile-TerminalModeConfiguration-ClearScreenClear the screen at terminal server startup.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.13 |
termSrvProfile-TerminalModeConfiguration-SystemPasswordGlobal terminal server system access password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.14 |
termSrvProfile-TerminalModeConfiguration-BannerThe terminal server login banner.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.15 |
termSrvProfile-TerminalModeConfiguration-LoginPromptThe string used to prompt for user name when authentication is in use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.16 |
termSrvProfile-TerminalModeConfiguration-PasswordPromptThe string used to prompt for password when authentication is in use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.17 |
termSrvProfile-TerminalModeConfiguration-ThirdLoginPromptAn optional third prompt for a terminal server login. If this value is null no third prompt is used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.18 |
termSrvProfile-TerminalModeConfiguration-ThirdPromptSequenceSelect where the third prompt should appear in the login sequence: either before or after user name & password.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.19 |
termSrvProfile-TerminalModeConfiguration-PromptThe current terminal server prompt.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.20 |
termSrvProfile-TerminalModeConfiguration-TerminalTypeThe default terminal type for telnet and rlogin sessions.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.21 |
termSrvProfile-TerminalModeConfiguration-ClearCallSelect operation when a telnet/rlogin/tcp session terminates. When set to yes, the dial-in session will also terminate.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.22 |
termSrvProfile-TerminalModeConfiguration-BufferCharsWhether to buffer termserv characters or to forward them without buffering. Buffering provides better throughput at a slight increase in latency.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.23 |
termSrvProfile-TerminalModeConfiguration-PingEnable/disable the ping command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.24 |
termSrvProfile-TerminalModeConfiguration-TracerouteEnable/disable the traceroute command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.25 |
termSrvProfile-TerminalModeConfiguration-TcpEnable/disable the tcp command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.26 |
termSrvProfile-TerminalModeConfiguration-TsAraEnabledTRUE if terminal server users are allowed to intiate async ARA sessions.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.27 |
termSrvProfile-TerminalModeConfiguration-RloginOptions-RloginEnable/disable the rlogin command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.28 |
termSrvProfile-TerminalModeConfiguration-RloginOptions-MaxSourcePortA highest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.29 |
termSrvProfile-TerminalModeConfiguration-RloginOptions-MinSourcePortA lowest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.30 |
termSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetEnable/disable the use of the telnet terminal server command.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.31 |
termSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetModeSelects default Telnet mode: ASCII, Binary, or Transparent.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.32 |
termSrvProfile-TerminalModeConfiguration-TelnetOptions-AutoTelnetIf set to 'yes' unknown terminal server commands will be treated as the name of a host to telnet to.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.33 |
termSrvProfile-TerminalModeConfiguration-TelnetOptions-LocalEchoDefines the default echo mode for telnet sessions. The default mode can be overridded on the command line.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.34 |
termSrvProfile-TerminalModeConfiguration-TelnetOptions-SecurityLevel of security used to authenticate telnet sessions.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.35 |
termSrvProfile-TerminalModeConfiguration-IpAddMsgThis is a text field that will be printed in front of the IP address in the terminal server when going into PPP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.36 |
termSrvProfile-TerminalModeConfiguration-PromptFormatTRUE if the terminal server prompt should interpret \\n.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.37 |
termSrvProfile-TerminalModeConfiguration-IpNetmaskMsgThis is a text field that will be printed in front of the IP Netmask in the terminal server when going into SLIP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.38 |
termSrvProfile-TerminalModeConfiguration-IpGwAddMsgThis is a text field that will be printed in front of the IP Gateway address in the terminal server when going into SLIP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.39 |
termSrvProfile-TerminalModeConfiguration-LoginTimeoutThe number of seconds to wait at the login prompt for the user to login. A value of 0 disables the timeout.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.40 |
termSrvProfile-TerminalModeConfiguration-PacketizeWaitTimeThe number of milliseconds to accumulate modem data in a packet.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.41 |
termSrvProfile-TerminalModeConfiguration-PacketizeCharsThe number of characters to accumulate modem data in a packet.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.42 |
termSrvProfile-ImmediateModeOptions-Serviceenable/disable immediate mode and specify the service type. Immediate mode is where a user is automatically connected to a remote host using the specified service.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.43 |
termSrvProfile-ImmediateModeOptions-TelnetHostAuthOption defines if telnet is started directly bypassing the local authentication process. When enabled, authentication is the responsibility of the telnet host.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.44 |
termSrvProfile-ImmediateModeOptions-HostName or IP address or X.121 address of the immediate TELNET, TCP, or X.25/Pad host to connect to.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.45 |
termSrvProfile-ImmediateModeOptions-PortTCP port to which the TELNET or TCP stream is to be redirected to.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.46 |
termSrvProfile-MenuModeOptions-StartWithMenusTerminal server interface will start in menu mode when this field is 'yes'.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.47 |
termSrvProfile-MenuModeOptions-ToggleScreenWhen enabled, users are able to toggle between menu mode and the normal terminal server command line.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.48 |
termSrvProfile-MenuModeOptions-RemoteConfigurationWhen enabled, the text and host addresses that make up the menu will be retrieved from RADIUS (if RADIUS is enabled).rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.49 |
termSrvProfile-MenuModeOptions-Text1The text to put in the terminal server menu for the first login host when remote configuration isn't available.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.50 |
termSrvProfile-MenuModeOptions-Host1The address of the first host to access when terminal server menu mode is being used without remote configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.51 |
termSrvProfile-MenuModeOptions-Service1Type of service required for this selection.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.52 |
termSrvProfile-MenuModeOptions-Port1The port for contacting host. Used only for telnet service.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.53 |
termSrvProfile-MenuModeOptions-User1The user name for this selection. Used only for rlogin service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.54 |
termSrvProfile-MenuModeOptions-Text2The text to put in the terminal server menu for the second login host when remote configuration isn't available.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.55 |
termSrvProfile-MenuModeOptions-Host2The address of the second host to access when terminal server menu mode is being used without remote configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.56 |
termSrvProfile-MenuModeOptions-Service2Type of service required for this selection.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.57 |
termSrvProfile-MenuModeOptions-Port2The port for contacting host. Used only for telnet service.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.58 |
termSrvProfile-MenuModeOptions-User2The user name for this selection. Used only for rlogin service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.59 |
termSrvProfile-MenuModeOptions-Text3The text to put in the terminal server menu for the third login host when remote configuration isn't available.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.60 |
termSrvProfile-MenuModeOptions-Host3The address of the third host to access when terminal server menu mode is being used without remote configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.61 |
termSrvProfile-MenuModeOptions-Service3Type of service required for this selection.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.62 |
termSrvProfile-MenuModeOptions-Port3The port for contacting host. Used only for telnet service.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.63 |
termSrvProfile-MenuModeOptions-User3The user name for this selection. Used only for rlogin service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.64 |
termSrvProfile-MenuModeOptions-Text4The text to put in the terminal server menu for the forth login host when remote configuration isn't available.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.65 |
termSrvProfile-MenuModeOptions-Host4The address of the forth host to access when terminal server menu mode is being used without remote configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.66 |
termSrvProfile-MenuModeOptions-Service4Type of service required for this selection.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.67 |
termSrvProfile-MenuModeOptions-Port4The port for contacting host. Used only for telnet service.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.68 |
termSrvProfile-MenuModeOptions-User4The user name for this selection. Used only for rlogin service.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.69 |
termSrvProfile-MenuModeOptions-MenuSelectionStringThe selection string for the menu mode.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.70 |
termSrvProfile-PppModeConfiguration-PppEnable/disable the PPP terminal server command.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.71 |
termSrvProfile-PppModeConfiguration-DelayThe number of seconds to wait for PPP before putting up the login banner and converting to telnet mode.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.72 |
termSrvProfile-PppModeConfiguration-DirectOption defines if PPP negotiation is started directly after 'PPP' Term Server command is received or, not. When disabled, we wait to receive a PPP packet before sending.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.73 |
termSrvProfile-PppModeConfiguration-InfoEnable/Disable the PPP/SLIP start up message.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.74 |
termSrvProfile-SlipModeConfiguration-SlipEnable/disable the SLIP command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.75 |
termSrvProfile-SlipModeConfiguration-SlipBootpEnable/disable the SLIP command from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.76 |
termSrvProfile-SlipModeConfiguration-InfoLevel of information displayed in SLIP start up message.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.77 |
termSrvProfile-SlipModeConfiguration-CslipAutoDetectEnable/disbale auto detecting of SLIP header compression. This feature will try to auto-detect if the caller is using Van Jacobson header compression, and if so, the box will automatically switch to CSLIP mode.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.78 |
termSrvProfile-DialoutConfiguration-EnabledAllow/disallow modem outdial from the terminal server.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.79 |
termSrvProfile-DialoutConfiguration-DirectAccessAllows direct connection to a modem by TELNETing to a configurable modem port.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.80 |
termSrvProfile-DialoutConfiguration-PortForDirectAccessThe telnet port number for direct access to a modem.rw INTEGER .1.3.6.1.4.1.4253.1.133.1.1.81 |
termSrvProfile-DialoutConfiguration-PasswordForDirectAccessThe password that must be used to gain direct access to a modemrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.133.1.1.82 |
termSrvProfile-DialoutConfiguration-SecurityForDirectAccessThe security method used to control direct modem access.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.83 |
termSrvProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.84 |
termSrvProfile-ModemConfiguration-ModemOnHoldTimeoutThe allowable Modem-on-Hold timeout values.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.85 |
termSrvProfile-ModemConfiguration-QuickConnectEnabledIf set to yes, Quick-Connect will be enabled.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.86 |
termSrvProfile-ModemConfiguration-MaxV92ReceiveBaudRateThe maximum V.92 receive baud rate to be attempted by the modems.rw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.87 |
termSrvProfile-ModemConfiguration-V44EnabledIf set to yes, allow V.44 compression to be negotiatedrw Enumeration .1.3.6.1.4.1.4253.1.133.1.1.88 |