ASCEND-MIBSYS1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBSYS1-MIB.
68
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
mibsystemProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.125 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.125 |
mibsystemProfileTableA list of mibsystemProfile profile entries. SEQUENCE OF MibsystemProfileEntry .1.3.6.1.4.1.4253.1.125.1 |
mibsystemProfileEntryA mibsystemProfile entry containing objects that
maps to the parameters of mibsystemProfile profile. MibsystemProfileEntry .1.3.6.1.4.1.4253.1.125.1.1 |
systemProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.125.1.1.1 |
systemProfile-NameThe name of the system given by the user, a standard null terminated ASCII string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.2 |
systemProfile-ContactThe name of the contact for this device. SNMP readable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.3 |
systemProfile-LocationThe location of this device. SNMP readable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.4 |
systemProfile-TermRateThe bit rate of the management terminal port, as given above.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.5 |
systemProfile-ConsoleA MenuType specifying the type of interface to use on the console port.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.6 |
systemProfile-ConsoleSecuritySerial console security for the control port.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.7 |
systemProfile-SystemRmtMgmtSet true if this system allows remote management.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.8 |
systemProfile-SubAddressModeSelects system wide sub-address support. See mibglob.mdf for details.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.9 |
systemProfile-SerialSubaddresssub-address assigned to serial port connections.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.10 |
systemProfile-LanSubaddresssub-address assigned to sync lan connections.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.11 |
systemProfile-DmSubaddresssub-address assigned to digital modem connections.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.12 |
systemProfile-V110Subaddresssub-address assigned to V.110 rate adaption connectionsrw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.13 |
systemProfile-UseTrunkGroupsEnables TrunkGroups for all network lines.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.14 |
systemProfile-NumDigitsTrunkGroupsSpecify number of digits TrunkGroups support.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.15 |
systemProfile-AutoLogoutWhen TRUE select the default security profile on loss of CD/DTR from the main console port.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.16 |
systemProfile-IdleLogoutWhen non-zero select the default security profile after this value of minutes with no keyboard activity.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.17 |
systemProfile-P50SwitchUsageWhat the P50 switch does.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.18 |
systemProfile-oDS0MinRstHas three choices: Off, 24Hr or Monthly. When enabled, the following maxSystemDS0Mins is the high water mark at which all switched connections originating on the system will be taken down.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.19 |
systemProfile-MaxSystemDS0MinsSets the high water billing mark at which all originating switched connections are brought down.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.20 |
systemProfile-MaxDialoutTimeThe max time in Sec, system will wait for Call Setup Completerw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.21 |
systemProfile-ParallelDialingThe number of simultaneous DS0 channel outdials the switch allows.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.22 |
systemProfile-SingleFileIncomingShould the calls be treated as a single-file list, or in parallel. PictureTel wants parallel others want single-file.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.23 |
systemProfile-DelayDualPortDialingTRUE if we should delay between dual port calls, FALSE if they should be placed at the same time.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.24 |
systemProfile-EditNumberThe menu number of the default edit screen.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.25 |
systemProfile-AnalogEncodingSets the encoding standard for digitized analog data to either u-Law or A-Law. Universally sets all codecs on the unit to the value selected. Defaults to u-Law for T1, A-Law for E1 interfaces.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.26 |
systemProfile-SessionidBaseThe base session ID valuerw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.27 |
systemProfile-TOnlineTRUE if we should route calls to T-Online, FALSE if not.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.28 |
systemProfile-TOnlineMostAvailChanTRUE if T-Online calls are to be routed to NT line with the most available B-channels FALSE if it is based on circular basis.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.29 |
systemProfile-T302TimerNumber of milliseconds to wait for additional called number information elements for an incoming T-Online call. Defaults to 1500.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.30 |
systemProfile-CallRoutingSortMethodHow to sort the Call Routing table for analog calls.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.31 |
systemProfile-DigitalCallRoutingSortMethodHow to sort the Call Routing table for digital calls.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.32 |
systemProfile-ExactMatchCallRoutingIf yes, the system will search for an exact match of call-route profile parameters when selecting devices. Wildcard matches will be accepted only after all 4 quadrants have been searched. (APX only)rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.33 |
systemProfile-ShelfControllerTypeUsed to define the role of this controller in a single-shelf or multi-shelf system. Note: This variable is not applicable to the APX 8000.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.34 |
systemProfile-MasterShelfControllerMaster shelf controller number. This attribute exists only when the shelf-controller-type is SLAVE. Note: This variable is not applicable to the APX 8000.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.35 |
systemProfile-NewNasPortIdFormatField is deprecated; use the 'nas-port-format' field to specify the NAS port format. Will be used only if 'nas-port-format' is set to 'not-applicable'. TRUE if new NAS port ID format is used, FALSE if old NAS Port ID is used. On the TNT product family the new NAS port ID format is used by default. The old format cannot be used for multi-shelf systems or if any line cards are in a slot greater than the twelfth position.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.36 |
systemProfile-ModemPriTypeOfNumberPRI Called Party element's Type-Of-Number value for outgoing modem calls.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.37 |
systemProfile-ModemPriNumberingPlanIdPRI Called Party element's Numbering-Plan-ID value for outgoing modem calls.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.38 |
systemProfile-WanInterfaceSets the type of WAN interface supported: T1-CSU or Serial WAN.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.39 |
systemProfile-PermConnUpdModeEnables nonintrusive remote update of permanent connections' configurations. 'Changed' means that only changed connections will be torn down and reestablished, 'All' means all existing permanent connections will be turn down and then reestablished only if they are fetched from the RADIUS server againrw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.40 |
systemProfile-UserstatFormatDefines the output format of the session listing command 'userstat' and the remote user information protocol 'finger'. The following special characters will be converted to their values for each listed session. The width of each field is indicated in []. %i [10] SessionID, Unique ID assigned to the session. %l [10] Line/Chan, Physical address (shelf.slot.line/chan). %s [11] Slot:Item, shelf:slot:item/logical-item of the host port. %r [11] Tx/Rx Rate, Transmit and receive rates. %d [ 3] Svc, A three-letter code showing the type of service. %a [15] Address, IP address. %u [14] Username, Connection profile name. %c [10] ConnTime, Ammount of time connected in hours:minutes:seconds. %t [10] IdleTime, Ammount of time idle in hours:minutes:seconds. %n [24] Dialed#, Number dialed if known. %f [24] Calling#, Number calling from if known. For example set userstat-format = '%i %l %s %r %d %a %u %c %t %n' would set the format to the factory default value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.41 |
systemProfile-ControlBusTypeHow to send control bus messages. This attribute exists only when the shelf-controller-type is not SLAVE.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.42 |
systemProfile-BootSrVersionPlace for tntsrb, the shelf controller boot loader, to provide its version. Boot loader updates the field with its version on every system resetro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.43 |
systemProfile-SysModemProfile-oATAnswerStringAllows the user to enter any additional AT commands in the modem answer string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.44 |
systemProfile-CallByCallPRI Called Party element's Network Specific Facility for Call-by-Call.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.45 |
systemProfile-CountryCountry in which the system is located.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.46 |
systemProfile-PotsDigitTimeoutPOTS interdigit timeout.rw INTEGER .1.3.6.1.4.1.4253.1.125.1.1.47 |
systemProfile-System8kClock8KHz clock source for Stinger-10.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.48 |
systemProfile-SupportDbcsTRUE if we should support DBCS character set, FALSE if not.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.49 |
systemProfile-IncCallDistribRoute incoming calls to first available valid port or the least used among a set of ports.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.50 |
systemProfile-IgnoreLineupIf ignore-lineup in line config profile is set to SYSTEM DEFINED, then this will take precedence.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.51 |
systemProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.52 |
systemProfile-JamFileComponents-JamFile1File name of the first JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.53 |
systemProfile-JamFileComponents-JamFile2File name of the second JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.54 |
systemProfile-JamFileComponents-JamFile3File name of the third JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.55 |
systemProfile-JamFileComponents-JamFile4File name of the fourth JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.56 |
systemProfile-JamFileComponents-JamFile5File name of the fifth JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.57 |
systemProfile-JamFileComponents-JamFile6File name of the sixth JAM file's componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.1.1.58 |
systemProfile-NasPortFormatSpecifies NAS-Port-Format used to calculate the NAS-Port-ID. When set to 'not-applicable', indicates that the NAS Port Format is determined by the settings in the 'new-nas-port-id-format' field. Defaults to 'not-applicable'.rw Enumeration .1.3.6.1.4.1.4253.1.125.1.1.59 |
mibsystemProfile-StatusNumberTableA list of mibsystemProfile__status_number profile entries. SEQUENCE OF MibsystemProfile-StatusNumberEntry .1.3.6.1.4.1.4253.1.125.2 |
mibsystemProfile-StatusNumberEntryA mibsystemProfile__status_number entry containing objects that
maps to the parameters of mibsystemProfile__status_number profile. MibsystemProfile-StatusNumberEntry .1.3.6.1.4.1.4253.1.125.2.1 |
systemProfile-StatusNumber-Index-oro INTEGER .1.3.6.1.4.1.4253.1.125.2.1.1 |
systemProfile-StatusNumber-Index1-oro INTEGER .1.3.6.1.4.1.4253.1.125.2.1.2 |
systemProfile-StatusNumberAn array of status screen number entries used to specify the default status screen layout.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.125.2.1.3 |