ASCEND-MIBSWITCHCONFIG-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
mibswitchConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.151 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.151 |
mibswitchConfigTableA list of mibswitchConfig profile entries. SEQUENCE OF MibswitchConfigEntry .1.3.6.1.4.1.4253.1.151.1 |
mibswitchConfigEntryA mibswitchConfig entry containing objects that
maps to the parameters of mibswitchConfig profile. MibswitchConfigEntry .1.3.6.1.4.1.4253.1.151.1.1 |
switchConfig-SwitchNameName of Switch configuration profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.151.1.1.1 |
switchConfig-Action-orw Enumeration .1.3.6.1.4.1.4253.1.151.1.1.2 |
mibswitchConfig-AtmParameters-OutgoingShaperTableA list of mibswitchConfig__atm_parameters__outgoing_shaper profile entries. SEQUENCE OF MibswitchConfig-AtmParameters-OutgoingShaperEntry .1.3.6.1.4.1.4253.1.151.2 |
mibswitchConfig-AtmParameters-OutgoingShaperEntryA mibswitchConfig__atm_parameters__outgoing_shaper entry containing objects that
maps to the parameters of mibswitchConfig__atm_parameters__outgoing_shaper profile. MibswitchConfig-AtmParameters-OutgoingShaperEntry .1.3.6.1.4.1.4253.1.151.2.1 |
switchConfig-AtmParameters-OutgoingShaper-SwitchNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.151.2.1.1 |
switchConfig-AtmParameters-OutgoingShaper-Index-oro INTEGER .1.3.6.1.4.1.4253.1.151.2.1.2 |
switchConfig-AtmParameters-OutgoingShaper-QueueIndex0: this shaper is inactive. Non-0: identifies the queue (of an outgoing trunk port) whose bandwidth with the specified VPI will be shaped by this shaper. Condition: queue must have already been properly configured. Limit: at most 1 shaper per VPI.rw INTEGER .1.3.6.1.4.1.4253.1.151.2.1.3 |
switchConfig-AtmParameters-OutgoingShaper-VpiDesignate the VPI whose bandwidth to be shaped.rw INTEGER .1.3.6.1.4.1.4253.1.151.2.1.4 |
switchConfig-AtmParameters-OutgoingShaper-BandwidthBandwidth (in KBits/sec) to shape.rw INTEGER .1.3.6.1.4.1.4253.1.151.2.1.5 |
mibswitchConfig-AtmParameters-OutgoingQueueTableA list of mibswitchConfig__atm_parameters__outgoing_queue profile entries. SEQUENCE OF MibswitchConfig-AtmParameters-OutgoingQueueEntry .1.3.6.1.4.1.4253.1.151.3 |
mibswitchConfig-AtmParameters-OutgoingQueueEntryA mibswitchConfig__atm_parameters__outgoing_queue entry containing objects that
maps to the parameters of mibswitchConfig__atm_parameters__outgoing_queue profile. MibswitchConfig-AtmParameters-OutgoingQueueEntry .1.3.6.1.4.1.4253.1.151.3.1 |
switchConfig-AtmParameters-OutgoingQueue-SwitchNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.151.3.1.1 |
switchConfig-AtmParameters-OutgoingQueue-Index-oro INTEGER .1.3.6.1.4.1.4253.1.151.3.1.2 |
switchConfig-AtmParameters-OutgoingQueue-Activeyes: this queue (of outgoing ATM cells) is active.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.3 |
switchConfig-AtmParameters-OutgoingQueue-NameFor future use. The current design does not use this name attribute but instead references a LIM slot, CM, or trunk port by its physical-address. We may in the future support referencing a LIM slot, CM, or trunk port by its name as well as by its physical-address. This name attribute consists of a null-terminated ASCII string; is read-only; and defaults to the ASCII form of physical-address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.151.3.1.4 |
switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.5 |
switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.6 |
switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.151.3.1.7 |
switchConfig-AtmParameters-OutgoingQueue-Cbryes: this queue supports ATM constant-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.8 |
switchConfig-AtmParameters-OutgoingQueue-RealTimeVbryes: this queue supports ATM real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.9 |
switchConfig-AtmParameters-OutgoingQueue-NonRealTimeVbryes: this queue supports ATM non-real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.10 |
switchConfig-AtmParameters-OutgoingQueue-Ubryes: this queue supports ATM unspecified-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.11 |
switchConfig-AtmParameters-OutgoingQueue-HighPriorityWeightSets the weight of this queue on the high-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128.rw INTEGER .1.3.6.1.4.1.4253.1.151.3.1.12 |
switchConfig-AtmParameters-OutgoingQueue-LowPriorityWeightSets the weight of this queue on the low-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128.rw INTEGER .1.3.6.1.4.1.4253.1.151.3.1.13 |
switchConfig-AtmParameters-OutgoingQueue-SourcePort-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.14 |
switchConfig-AtmParameters-OutgoingQueue-SourcePort-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.15 |
switchConfig-AtmParameters-OutgoingQueue-SourcePort-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.151.3.1.16 |
switchConfig-AtmParameters-OutgoingQueue-HopLevelIt specifies this queue can be used only by those VCs that originated 'hop-level' hops from this Stinger. The default value any-level means that data from permissible source ports at any hop level can be permitted into this queue.rw Enumeration .1.3.6.1.4.1.4253.1.151.3.1.17 |