ASCEND-MIBSS7NMI-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBSS7NMI-MIB.
47
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
mibsS7Profile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.121 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.121 |
mibsS7ProfileTableA list of mibsS7Profile profile entries. SEQUENCE OF MibsS7ProfileEntry .1.3.6.1.4.1.4253.1.121.1 |
mibsS7ProfileEntryA mibsS7Profile entry containing objects that
maps to the parameters of mibsS7Profile profile. MibsS7ProfileEntry .1.3.6.1.4.1.4253.1.121.1.1 |
sS7Profile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.121.1.1.1 |
sS7Profile-EnabledWhen set to 'no', interface to the SS7 gateway is disabled.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.2 |
sS7Profile-ControlProtocolControl protocol between the access server and the signaling gateway.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.3 |
sS7Profile-PrimaryIpAddressIP address of the primary SS7 gateway.rw IpAddress .1.3.6.1.4.1.4253.1.121.1.1.4 |
sS7Profile-PrimaryTcpPortTCP port on primary SS7 gateway.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.5 |
sS7Profile-SecondaryIpAddressIP address of the secondary SS7 gateway.rw IpAddress .1.3.6.1.4.1.4253.1.121.1.1.6 |
sS7Profile-SecondaryTcpPortTCP port on the secondary SS7 gateway.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.7 |
sS7Profile-BayIdBay ID defines the bay this device belongs to. Used for registration purposes only. The content of this field is reported to the gateway during the device registration process.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.121.1.1.8 |
sS7Profile-SystemTypeModel ID and/or type of equipment. Used for device registration only. Must be listed in the database on the Gateway.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.121.1.1.9 |
sS7Profile-TransportOptions-TypeThe type of transport layer that is to be usedrw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.10 |
sS7Profile-TransportOptions-DeviceIdA code that uniquely identifies this device to the Gateway. If multiple remote access servers are configured to use the same signaling gateway, every one of those servers must be assigned an identifier that is unique within the group.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.11 |
sS7Profile-TransportOptions-T1DurationValue of the ACK delay timer in milliseconds. This timer specifies the maximum delay for an acknowledgement when an I-frame is received. Default value is 1000 (1 second). The value must be less than T2 on the peer.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.12 |
sS7Profile-TransportOptions-T2DurationValue of the transmission timeout timer in milliseconds. This timer specifies how long this endpoint should wait for an acknowledgement. Default value is 3000 (3 seconds). The value must be greater than T1 on the peer.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.13 |
sS7Profile-TransportOptions-T3DurationValue of the persistent error timer in milliseconds. This timer specifies the maximum duration of attempts to re-establish a link before the transport layer flushes the data queues and sends an error indication up. Default value is 30000 (30 seconds).rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.14 |
sS7Profile-TransportOptions-WindowSizeMaximum number of sequentially numbered data packets that can be sent while pending acknowledgement at any given time. Default value is 7.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.15 |
sS7Profile-TransportOptions-AckThresholdThe threshold for triggering an acknowledgement while receiving data packets. As soon as the specified number of packets is received, an ACK is sent back regardless of the value of T1 timer. The value of this parameter may not be greater than the window size. Default value is 6.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.16 |
sS7Profile-TransportOptions-HeartBeatWhen set to 'no', layer 2 heartbeat mechanism is not enabled.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.17 |
sS7Profile-UseSystemIpAddressAsSourceWhen set to 'yes', use configured System IP Address as source ip address. When set to 'no', use IP Address of outgoing interface as source ip address.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.18 |
sS7Profile-CongestionControl-CongestionControlTypeType of the congestion control algorithm to use.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.19 |
sS7Profile-CongestionControl-Cl1LevelThe level at which 'congestion level 1' indication will be issued. The value is interpreted according to the configured congestion control 'type'.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.20 |
sS7Profile-CongestionControl-Cl1ActionAction taken when congestion level 1 (defined by the value of cl1-level) is reached.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.21 |
sS7Profile-CongestionControl-Cl2LevelThe level at which 'congestion level 2' indication will be issued. The value is interpreted according to the configured congestion control 'type'.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.22 |
sS7Profile-CongestionControl-Cl2ActionAction taken when congestion level 2 (defined by the value of cl2-level) is reached.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.23 |
sS7Profile-SignalingHeartbeat-EnabledWhen set to yes, TNT will generate signaling heartbeat to MGC based on the interval configured in signaling-heartbeat interval.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.24 |
sS7Profile-SignalingHeartbeat-IntervalThe time interval in seconds for layer 3 heartbeat messages.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.25 |
sS7Profile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.26 |
sS7Profile-ResilienceOptions-TypeThe type of resilience action required when line state changes.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.27 |
sS7Profile-ResilienceOptions-DurationThe duration in milli seconds for which calls should be maintained when line state changes. Valid only if the type is configured as timed-release.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.28 |
sS7Profile-PriTunnelingOptions-EnabledWhen set to yes, we will synchronize the d-channel status with the IPDC signaling link state.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.29 |
sS7Profile-PriTunnelingOptions-DurationThe duration in milliseconds after which bringing down D-channel of tunneled-pri-signaling lines will be initiated.rw INTEGER .1.3.6.1.4.1.4253.1.121.1.1.30 |
sS7Profile-IpdcSourceAdddressIP address to be used on the private networkrw IpAddress .1.3.6.1.4.1.4253.1.121.1.1.32 |
sS7Profile-VrouterSpecifies the virtual router to be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.121.1.1.33 |
sS7Profile-TransportOptions-Tos-ActiveActivate type of service for this connection.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.34 |
sS7Profile-TransportOptions-Tos-PrecedenceTag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.35 |
sS7Profile-TransportOptions-Tos-TypeOfServiceTag the type of service field in the TOS octet of IP datagram header with this value when match occurs.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.36 |
sS7Profile-TransportOptions-Tos-ApplyToDefine how the type-of-service applies to data flow for this connection.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.37 |
sS7Profile-TransportOptions-Tos-MarkingTypeSelect type of packet marking.rw Enumeration .1.3.6.1.4.1.4253.1.121.1.1.38 |
sS7Profile-TransportOptions-Tos-DscpDSCP tag to be used in marking of the packets (if marking-type = dscp).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.121.1.1.39 |
mibpRITunlStatProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.158 |
mibpRITunlStatProfileTableA list of mibpRITunlStatProfile profile entries. SEQUENCE OF MibpRITunlStatProfileEntry .1.3.6.1.4.1.4253.1.158.1 |
mibpRITunlStatProfileEntryA mibpRITunlStatProfile entry containing objects that
maps to the parameters of mibpRITunlStatProfile profile. MibpRITunlStatProfileEntry .1.3.6.1.4.1.4253.1.158.1.1 |
pRITunlStatProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.158.1.1.1 |
pRITunlStatProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.158.1.1.2 |