ASCEND-MIBSNMP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBSNMP-MIB.
59
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
mibsnmpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.114 |
mibsnmpProfileTableA list of mibsnmpProfile profile entries. SEQUENCE OF MibsnmpProfileEntry .1.3.6.1.4.1.4253.1.114.1 |
mibsnmpProfileEntryA mibsnmpProfile entry containing objects that
maps to the parameters of mibsnmpProfile profile. MibsnmpProfileEntry .1.3.6.1.4.1.4253.1.114.1.1 |
snmpProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.114.1.1.1 |
snmpProfile-EnabledWhen set to `no' (its default value), the unit cannot be accessed via SNMP.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.2 |
snmpProfile-ReadCommunityThe SNMP community name for read access.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.114.1.1.3 |
snmpProfile-ReadWriteEnabledWhen set to `no' (its default value), the write community cannot be accessed via SNMP.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.4 |
snmpProfile-ReadWriteCommunityThe SNMP community name for read/write access.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.114.1.1.5 |
snmpProfile-EnforceAddressSecurityWhen set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `yes', we will check the source IP address against the ones that are defined in the SNMP-MANAGER profiles before allowing access.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.6 |
snmpProfile-ContactThe name of the contact for this device. SNMP readable and settable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.114.1.1.7 |
snmpProfile-LocationThe location of this device. SNMP readable and settable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.114.1.1.8 |
snmpProfile-QueueDepthThe maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus SNMP retries (only when the box is busy and gets behind on servicing the SNMP packets). Zero indicates there is no limit.rw INTEGER .1.3.6.1.4.1.4253.1.114.1.1.9 |
snmpProfile-CsmModemDiagWhen set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.10 |
snmpProfile-SnmpMessageTypeIndicate the message type that the SNMP agent should handle.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.11 |
snmpProfile-SecurityLevelIndicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabledrw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.12 |
snmpProfile-EnableVacmIf set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.13 |
snmpProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.14 |
snmpProfile-NotificationLogAgeOutThe number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out.rw INTEGER .1.3.6.1.4.1.4253.1.114.1.1.15 |
snmpProfile-EarlyQueueDiscardIf this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the SNMP UDP port 161. If this parameter is set to no, the system will queue all incoming SNMP requests to SNMP layer which will discard the requests later if they are from unauthorized host.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.16 |
snmpProfile-BitStringsAllowedIf enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format.rw Enumeration .1.3.6.1.4.1.4253.1.114.1.1.17 |
snmpProfile-AlarmClearTableLimitThe maximum number of alarmCleared entries that can be held in the alarmCleared table.rw INTEGER .1.3.6.1.4.1.4253.1.114.1.1.18 |
mibusmUserProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.115 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.115 |
mibusmUserProfileTableA list of mibusmUserProfile profile entries. SEQUENCE OF MibusmUserProfileEntry .1.3.6.1.4.1.4253.1.115.1 |
mibusmUserProfileEntryA mibusmUserProfile entry containing objects that
maps to the parameters of mibusmUserProfile profile. MibusmUserProfileEntry .1.3.6.1.4.1.4253.1.115.1.1 |
usmUserProfile-NameThe user (principal) on whose behalf the message is being exchange.ro OCTET STRING .1.3.6.1.4.1.4253.1.115.1.1.1 |
usmUserProfile-ActiveEnabledTRUE if this user is enabled for message exchange.rw Enumeration .1.3.6.1.4.1.4253.1.115.1.1.2 |
usmUserProfile-ReadWriteAccessTRUE if this user is configured for read-write access to MIB view.rw Enumeration .1.3.6.1.4.1.4253.1.115.1.1.3 |
usmUserProfile-AuthProtocolIndicate whether messages sent on behalf of this user to/from the SNMP engine can be authenticated and,if so, the type of authentication protocol to be used.rw Enumeration .1.3.6.1.4.1.4253.1.115.1.1.4 |
usmUserProfile-PrivProtocolIndicate whether messages sent on behalf of this user to/from the SNMP engine can be protected by encryption and,if so, the type of privacy protocol to be used.rw Enumeration .1.3.6.1.4.1.4253.1.115.1.1.5 |
usmUserProfile-AuthKeyThe user's authkey: calculated based on password and auth protocol. This can be set using snmpAuthPass commandrw OCTET STRING .1.3.6.1.4.1.4253.1.115.1.1.6 |
usmUserProfile-PrivKeyThe user's privacy: key calculated based on priv-password and auth protocol. This can be set using snmpPrivPass commandrw OCTET STRING .1.3.6.1.4.1.4253.1.115.1.1.7 |
usmUserProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.115.1.1.8 |
mibsnmpv3TargetParamProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.116 |
mibsnmpv3TargetParamProfileTableA list of mibsnmpv3TargetParamProfile profile entries. SEQUENCE OF Mibsnmpv3TargetParamProfileEntry .1.3.6.1.4.1.4253.1.116.1 |
mibsnmpv3TargetParamProfileEntryA mibsnmpv3TargetParamProfile entry containing objects that
maps to the parameters of mibsnmpv3TargetParamProfile profile. Mibsnmpv3TargetParamProfileEntry .1.3.6.1.4.1.4253.1.116.1.1 |
snmpv3TargetParamProfile-NameAny arbitrary, but unique identifier associated with this profilero OCTET STRING .1.3.6.1.4.1.4253.1.116.1.1.1 |
snmpv3TargetParamProfile-ActiveEnabledTRUE if this profile is enabled for generation of SNMP messagesrw Enumeration .1.3.6.1.4.1.4253.1.116.1.1.2 |
snmpv3TargetParamProfile-MsgProcModelMessage processing model used when generating SNMP messages using this entryrw Enumeration .1.3.6.1.4.1.4253.1.116.1.1.3 |
snmpv3TargetParamProfile-SecurityModelSecurity model to be used when generating SNMP messages using this entryrw Enumeration .1.3.6.1.4.1.4253.1.116.1.1.4 |
snmpv3TargetParamProfile-SecurityNameSecurity name which identifies the principal on whose behalf SNMP messages will be generated using this entry. This name should be a valid snmpv3-usm-userrw OCTET STRING .1.3.6.1.4.1.4253.1.116.1.1.5 |
snmpv3TargetParamProfile-SecurityLevelLevel of security to be used when generating messages using this entry.rw Enumeration .1.3.6.1.4.1.4253.1.116.1.1.6 |
snmpv3TargetParamProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.116.1.1.7 |
mibsnmpv3NotifyProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.117 |
mibsnmpv3NotifyProfileTableA list of mibsnmpv3NotifyProfile profile entries. SEQUENCE OF Mibsnmpv3NotifyProfileEntry .1.3.6.1.4.1.4253.1.117.1 |
mibsnmpv3NotifyProfileEntryA mibsnmpv3NotifyProfile entry containing objects that
maps to the parameters of mibsnmpv3NotifyProfile profile. Mibsnmpv3NotifyProfileEntry .1.3.6.1.4.1.4253.1.117.1.1 |
snmpv3NotifyProfile-NameAny arbitrary, but unique identifier associated with this profilero OCTET STRING .1.3.6.1.4.1.4253.1.117.1.1.1 |
snmpv3NotifyProfile-ActiveEnabledTRUE if this profile is enabled for generation of SNMP messagesrw Enumeration .1.3.6.1.4.1.4253.1.117.1.1.2 |
snmpv3NotifyProfile-TagSingle tag value that is used to select entries in the snmpTargetAddrTable ( 'trap' profile). If this contains a string of zero length, no entries are selected.rw OCTET STRING .1.3.6.1.4.1.4253.1.117.1.1.3 |
snmpv3NotifyProfile-TypeType of notification to be generated, i.e., Trap (unconfirmed class) or Inform (confirmed class). This field is for future use. Agent does not generate INFORM pdus.ro Enumeration .1.3.6.1.4.1.4253.1.117.1.1.4 |
snmpv3NotifyProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.117.1.1.5 |
mibsnmpManagerProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.118 |
mibsnmpManagerProfileTableA list of mibsnmpManagerProfile profile entries. SEQUENCE OF MibsnmpManagerProfileEntry .1.3.6.1.4.1.4253.1.118.1 |
mibsnmpManagerProfileEntryA mibsnmpManagerProfile entry containing objects that
maps to the parameters of mibsnmpManagerProfile profile. MibsnmpManagerProfileEntry .1.3.6.1.4.1.4253.1.118.1.1 |
snmpManagerProfile-NameThe name or the ip-address in dot format of the SNMP Manager (host) to send SNMP requests to the TAOS SNMP Agent. When DNS or YP/NIS is supported this name will be used to look up the LAN address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.118.1.1.1 |
snmpManagerProfile-ActiveTRUE if SNMP messages from a particular SNMP Manager should be processed. This implies read-access for SNMPv1.rw Enumeration .1.3.6.1.4.1.4253.1.118.1.1.2 |
snmpManagerProfile-WriteAccessWhen set to `no' (its default value), the SNMP agent only allows read requests. When set to 'yes', the SNMP agent allows write requests in addition to read requests.rw Enumeration .1.3.6.1.4.1.4253.1.118.1.1.3 |
snmpManagerProfile-SnmpMessageTypeIndicate the message type that the SNMP agent should allow for this SNMP Manager.rw Enumeration .1.3.6.1.4.1.4253.1.118.1.1.4 |
snmpManagerProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.118.1.1.5 |