Home/Catalog/ASCEND-MIBSHDSLSTAT-MIB

ASCEND-MIBSHDSLSTAT-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for ASCEND-MIBSHDSLSTAT-MIB.

Objects

Active

Status

Dependencies

Imported Objects

ASCEND-MIB

RFC1155-SMI

RFC-1212

Objects

47 total

Object Name	Syntax	OID
mibshdslDslLineStatus OBJECT IDENTIFIER `.1.3.6.1.4.1.4253.1.157`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4253.1.157`
RFC1155-SMI Unknown `.1.3.6.1.4.1.4253.1.157`	Unknown	`.1.3.6.1.4.1.4253.1.157`
mibshdslDslLineStatusTableA list of mibshdslDslLineStatus profile entries. SEQUENCE OF MibshdslDslLineStatusEntry `.1.3.6.1.4.1.4253.1.157.1`	SEQUENCE OF MibshdslDslLineStatusEntry	`.1.3.6.1.4.1.4253.1.157.1`
mibshdslDslLineStatusEntryA mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile. MibshdslDslLineStatusEntry `.1.3.6.1.4.1.4253.1.157.1.1`	MibshdslDslLineStatusEntry	`.1.3.6.1.4.1.4253.1.157.1.1`
shdslDslLineStatus-Shelf-oro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.1`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.1`
shdslDslLineStatus-Slot-oro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.2`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.2`
shdslDslLineStatus-Item-oro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.3`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.3`
shdslDslLineStatus-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.4`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.4`
shdslDslLineStatus-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.5`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.5`
shdslDslLineStatus-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.6`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.6`
shdslDslLineStatus-LineStateThe overall state of the line.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.7`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.7`
shdslDslLineStatus-SparePhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.8`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.8`
shdslDslLineStatus-SparePhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.9`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.9`
shdslDslLineStatus-SparePhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.10`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.10`
shdslDslLineStatus-SparingStateThe sparing state of the line.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.11`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.11`
shdslDslLineStatus-SparingChangeReasonThe reson for the last sparing state change.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.12`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.12`
shdslDslLineStatus-SparingChangeTimeThe time of the last sparing state change.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.13`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.13`
shdslDslLineStatus-SparingChangeCounterThe number of sparing state changes.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.14`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.14`
shdslDslLineStatus-VpiVciRangeThe valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.15`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.15`
shdslDslLineStatus-VpSwitchingVpiVPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.16`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.16`
shdslDslLineStatus-PhysicalStatus-IfGroupIndexInterface groups index assigned to this physical port.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.17`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.17`
shdslDslLineStatus-PhysicalStatus-UnitTypeUnit types defines if the node is operating Central Office or Customer Premise equipment software.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.18`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.18`
shdslDslLineStatus-PhysicalStatus-InterfaceTypeInterface type defines if the node is operating on SHDSL or GSHDSLro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.19`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.19`
shdslDslLineStatus-PhysicalStatus-DevLineStateDisplay of current interface state.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.20`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.20`
shdslDslLineStatus-PhysicalStatus-OperationalRateOperational up and down stream rate. Zero means unknown.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.21`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.21`
shdslDslLineStatus-PhysicalStatus-FirmwareVerFirmware version ID.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.4253.1.157.1.1.22`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.4253.1.157.1.1.22`
shdslDslLineStatus-PhysicalStatus-HardwareVerHardware chip version.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.23`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.23`
shdslDslLineStatus-PhysicalStatistic-LineUpTimer-DaysNumber of days that the DSL line has been up.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.24`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.24`
shdslDslLineStatus-PhysicalStatistic-LineUpTimer-HoursNumber of hours that the DSL line has been up.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.25`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.25`
shdslDslLineStatus-PhysicalStatistic-LineUpTimer-MinutesNumber of minutes that the DSL line has been up.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.26`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.26`
shdslDslLineStatus-PhysicalStatistic-RxSignalPresentState if the receive signal is present or not.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.27`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.27`
shdslDslLineStatus-PhysicalStatistic-LineQualityWhile the port is in the up state, this parameter displays the line quality.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.28`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.28`
shdslDslLineStatus-PhysicalStatistic-UpDwnCntrInterface Up Down counter value displays the number of times the interface trasitions from a down to up state.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.29`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.29`
shdslDslLineStatus-PhysicalStatistic-SelfTestHardware/firmware self test results.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.30`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.30`
shdslDslLineStatus-PhysicalStatistic-TransmitPowerTransmit power in DB.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.31`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.31`
shdslDslLineStatus-PhysicalStatistic-FramerSyncStatusFramer sync statusro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.32`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.32`
shdslDslLineStatus-PhysicalStatistic-CodeViolationsLine is defined as a count of SHDSL CRC anomalies occuring during the accumuation period.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.33`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.33`
shdslDslLineStatus-PhysicalStatistic-ErroredSecondErrored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.34`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.34`
shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecondLine is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.35`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.35`
shdslDslLineStatus-PhysicalStatistic-LoswSecondLine is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.36`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.36`
shdslDslLineStatus-PhysicalStatistic-UnavailableSecondLine is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the SHDSL line becomes available at the onset of 10 contiguous seconds with no SES-L's.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.37`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.37`
shdslDslLineStatus-PhysicalStatistic-LoopAttenuationCurrent loop attenuation in DB.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.38`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.38`
shdslDslLineStatus-Action-orw Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.39`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.39`
shdslDslLineStatus-PhysicalStatistic-SnrWhile the port is in the up state, this parameter displays the Signal to Noise Ratio.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.40`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.40`
shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuationCurrent loop attenuation in DB from the STU-R.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.41`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.41`
shdslDslLineStatus-PhysicalStatistic-SturSnrWhile the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R.ro INTEGER `.1.3.6.1.4.1.4253.1.157.1.1.42`	INTEGER	`.1.3.6.1.4.1.4253.1.157.1.1.42`
shdslDslLineStatus-PhysicalStatus-NetworkTypeCurrent Standard Network type. Either Annex A, Annex B or Annex B ANFP.ro Enumeration `.1.3.6.1.4.1.4253.1.157.1.1.43`	Enumeration	`.1.3.6.1.4.1.4253.1.157.1.1.43`