ASCEND-MIBSDSLNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBSDSLNET-MIB.
34
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
mibsdslNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.8 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.8 |
mibsdslNetworkProfileTableA list of mibsdslNetworkProfile profile entries. SEQUENCE OF MibsdslNetworkProfileEntry .1.3.6.1.4.1.4253.1.8.1 |
mibsdslNetworkProfileEntryA mibsdslNetworkProfile entry containing objects that
maps to the parameters of mibsdslNetworkProfile profile. MibsdslNetworkProfileEntry .1.3.6.1.4.1.4253.1.8.1.1 |
sdslNetworkProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.8.1.1.1 |
sdslNetworkProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.8.1.1.2 |
sdslNetworkProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.8.1.1.3 |
sdslNetworkProfile-NameFor future use. The current design does not use the name field but instead references Sdsl lines by the physical address; we may in the future support referencing Sdsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Sdsl line physical address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.8.1.1.4 |
sdslNetworkProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.5 |
sdslNetworkProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.6 |
sdslNetworkProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.7 |
sdslNetworkProfile-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.8 |
sdslNetworkProfile-ProfileNumberFor potential backwards compatibility. The current design consists of one line profile numbered 0.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.9 |
sdslNetworkProfile-LineConfig-TrunkGroupThe trunk group to which this line is assigned. 0 means this line is not part of a trunk group.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.10 |
sdslNetworkProfile-LineConfig-NailedGroupA number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.11 |
sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumberrw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.12 |
sdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumberTNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.13 |
sdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumberrw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.14 |
sdslNetworkProfile-LineConfig-ActivationLine activation mode.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.15 |
sdslNetworkProfile-LineConfig-DataRateModeThe data rate mode defines the mode for modem training. This parameter does not pertain to the old 16 port sdsl card.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.19 |
sdslNetworkProfile-LineConfig-MaxRateThe symetrical interface rate. This parameter does not pertain to the old 16 port sdsl card.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.20 |
sdslNetworkProfile-LineConfig-UnitTypeThe Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the remote unit needs to be configured opposite to this configureation. This parameter does not pertain to the old 16 port sdsl card.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.21 |
sdslNetworkProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.22 |
sdslNetworkProfile-LineConfig-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.24 |
sdslNetworkProfile-LineConfig-AutoBaseRateWhen the Rate Mode is set to auto. This parameter defines the base rate that the auto rate mechanism uses to start its initial training with.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.25 |
sdslNetworkProfile-LineConfig-DataSenseIf this value is set to Inverted, the Tx data will be inverted and the Rx data will be expected to be inverted. Otherwise the Tx and Rx data will be non-inverted.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.26 |
sdslNetworkProfile-LineConfig-VpSwitchingVpiThe Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.27 |
sdslNetworkProfile-DhcpConfig-IpAddressThe static address to be assigned to dhcp client.rw IpAddress .1.3.6.1.4.1.4253.1.8.1.1.28 |
sdslNetworkProfile-DhcpConfig-MaxLeaseA number representing maximum number lease requests that would be granted.rw INTEGER .1.3.6.1.4.1.4253.1.8.1.1.29 |
sdslNetworkProfile-LineConfig-SdslDataFormatIf this value is set to Mag bit 1st, the sdsl-data-format outputs the magnitude before the sign bit. Otherwise with value set to sign bit 1st, the sdsl-data-format outputs the sign before the magnitude bit. This is our default.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.30 |
sdslNetworkProfile-SparingModePort sparing operational mode for this port.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.31 |
sdslNetworkProfile-LineConfig-LineModeThis line can be configured to run in ATM or HDLC serial mode.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.32 |
sdslNetworkProfile-LineConfig-LoopBackConfiguration of different modem loopbacks.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.33 |
sdslNetworkProfile-IgnoreLineupIgnore line up value for this port.rw Enumeration .1.3.6.1.4.1.4253.1.8.1.1.34 |