ASCEND-MIBREDHM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBREDHM-MIB.
18
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
mibredHealthMonitoringProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.179 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.179 |
mibredHealthMonitoringProfileTableA list of mibredHealthMonitoringProfile profile entries. SEQUENCE OF MibredHealthMonitoringProfileEntry .1.3.6.1.4.1.4253.1.179.1 |
mibredHealthMonitoringProfileEntryA mibredHealthMonitoringProfile entry containing objects that
maps to the parameters of mibredHealthMonitoringProfile profile. MibredHealthMonitoringProfileEntry .1.3.6.1.4.1.4253.1.179.1.1 |
redHealthMonitoringProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.179.1.1.1 |
redHealthMonitoringProfile-HmEnabledIndicates whether health monitoring feature is enabled. Redundancy feature has to be enabled prior to this featurerw Enumeration .1.3.6.1.4.1.4253.1.179.1.1.2 |
redHealthMonitoringProfile-MaxWarningPrimaryMaximum of total warnings allowed for primary, When the total warnings exceeds this maximum, controller will reset.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.3 |
redHealthMonitoringProfile-MaxWarningSecondaryMaximum of total warnings allowed for secondary, When the total warnings exceeds this maximum, controller will reset. Secondary should have a more stringent value than primary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.4 |
redHealthMonitoringProfile-MaxWarningPerMinutePrimaryMaximum of total warning per minute allowed for primary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.5 |
redHealthMonitoringProfile-MaxWarningPerMinuteSecondaryMaximum of total warning per minute allowed for secondary. Secondary should have a more stringent value than primary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.6 |
redHealthMonitoringProfile-MemoryThresholdPrimaryPercent threshold for available memory on primary, controller resets when memory is lower than the threshold.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.7 |
redHealthMonitoringProfile-MemoryThresholdSecondaryPercent threshold for available memory on secondary, controller resets when memory is lower than the threshold. Secondary should have a more stringent value than primary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.8 |
redHealthMonitoringProfile-MemoryAlertThresholdPrimaryPercent threshold for memory alert polling on primary, when memory level is lower than the threshold, log message will be sent out.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.9 |
redHealthMonitoringProfile-MemoryAlertThresholdSecondaryPercent threshold for memory alert polling on secondary, when memory level is lower than the threshold, log message will be sent out.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.10 |
redHealthMonitoringProfile-MemoryAlertTimeoutPrimaryMaximum time (in sec) allowed for memory level stays continuously below memory-alert-threshold-primary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.11 |
redHealthMonitoringProfile-MemoryAlertTimeoutSecondaryMaximum time (in sec) allowed for memory level stays continuously below memory-alert-threshold-secondary.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.12 |
redHealthMonitoringProfile-ResetStuckPrimaryTimeoutsecondary resets primary if no response from primary exceeds this timeout (in seconds). Minimum is 3 seconds.rw INTEGER .1.3.6.1.4.1.4253.1.179.1.1.13 |
redHealthMonitoringProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.179.1.1.14 |