ASCEND-MIBPORT1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBPORT1-MIB.
31
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
mibportProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.102 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.102 |
mibportProfileTableA list of mibportProfile profile entries. SEQUENCE OF MibportProfileEntry .1.3.6.1.4.1.4253.1.102.1 |
mibportProfileEntryA mibportProfile entry containing objects that
maps to the parameters of mibportProfile profile. MibportProfileEntry .1.3.6.1.4.1.4253.1.102.1.1 |
portProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.102.1.1.1 |
portProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.102.1.1.2 |
portProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.102.1.1.3 |
portProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.4 |
portProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.5 |
portProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.6 |
portProfile-NamePorts can be named, e.g. CODEC, Router, etc. The name is provided by the user. It is a standard null terminated ASCII string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.7 |
portProfile-LastModificationTimerw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.8 |
portProfile-PortAnswerNumber1The way in which calls are answered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.9 |
portProfile-PortAnswerNumber2The way in which calls are answered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.10 |
portProfile-PortAnswerNumber3The way in which calls are answered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.11 |
portProfile-PortAnswerNumber4The way in which calls are answered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.12 |
portProfile-oIdleWhat to do when a port goes idle.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.13 |
portProfile-oDialThe way in which calls are originated.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.14 |
portProfile-PortAnswerrw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.15 |
portProfile-oClearThe way in which calls are cleared, as given above.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.16 |
portProfile-PortMinPriBwMinimum priority bandwidth allocated to this port. Part of IDBM.rw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.17 |
portProfile-PortTerminalTimingTerminal timing enabled for this port?rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.18 |
portProfile-oRS366EscRS-366 dialing escape character.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.19 |
portProfile-oEarlyCDIf and when to perform early DCD on the host port.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.20 |
portProfile-PortDs0MinResetFor billing-cap features related to this port, the duration for the billing cap reset or disabled if apprpriate.rw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.21 |
portProfile-MaxPortDs0MinsThe maximum number of minutes that can be billed to this port in the duration set above. If the number exceeds the value set, all switched-calls will be cleared by the system.rw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.22 |
portProfile-MaxCallDurationTimerThe maximum length of time for a call to be active on this port. If a call is up longer than this time, the call is cleared automatically. This is all part of the no-surprises phone bill feature set.rw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.23 |
portProfile-DialPlanrw INTEGER .1.3.6.1.4.1.4253.1.102.1.1.24 |
portProfile-TrunkGroupsNarw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.25 |
portProfile-PortPasswordPort password used to authenticate DBA call's password. Authentication is automatic if port password is not defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.102.1.1.26 |
portProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.102.1.1.27 |