ASCEND-MIBLSMS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBLSMS-MIB.
12
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
12 total| Object Name |
|---|
miblsmsProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.150 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.150 |
miblsmsProfileTableA list of miblsmsProfile profile entries. SEQUENCE OF MiblsmsProfileEntry .1.3.6.1.4.1.4253.1.150.1 |
miblsmsProfileEntryA miblsmsProfile entry containing objects that
maps to the parameters of miblsmsProfile profile. MiblsmsProfileEntry .1.3.6.1.4.1.4253.1.150.1.1 |
lsmsProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.150.1.1.1 |
lsmsProfile-ActiveThis field is used to control whether Communications with the LSMS should be active or not (Yes/No). More specifically, if the router should start to listen for requests from the LSMS.rw Enumeration .1.3.6.1.4.1.4253.1.150.1.1.2 |
lsmsProfile-LsmsIpAddrIP address of the LSMS. It is used in validating requests from the LSMS and to communicate in an in-secure fashion directly with the LSMS.rw IpAddress .1.3.6.1.4.1.4253.1.150.1.1.3 |
lsmsProfile-NocGatewayIpAddrIP address of NOC Gateway to the LSMS. This is the Tunnel Endpoint address of the Secure Communications Channel. It is essentially the address of the device that terminates the tunnel with the router and sits between the LSMS and router.rw IpAddress .1.3.6.1.4.1.4253.1.150.1.1.4 |
lsmsProfile-SpiSecurity Parameter Index that is used for Encrypting Secure Communications Channel (IPsec Tunnel) traffic between the Router and LSMS. The SPI is used to distinguish among different security associations terminating at the same destination and using the same IPsec protocol.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.150.1.1.5 |
lsmsProfile-PresharedKeyPreshared Key used to create Authentication and Encryption keys that are used to create the IPsec tunnel for the Secure Communications Channel.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.150.1.1.6 |
lsmsProfile-AllowInsecureThis field is used to permit insecure communications. Insecure communications allows data to be sent in clear outside of an IPsec tunnel (Yes/No).rw Enumeration .1.3.6.1.4.1.4253.1.150.1.1.7 |
lsmsProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.150.1.1.8 |