ASCEND-MIBL2TUNNEL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBL2TUNNEL-MIB.
63
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
mibl2TunnelGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.90 |
mibl2TunnelGlobalTableA list of mibl2TunnelGlobal profile entries. SEQUENCE OF Mibl2TunnelGlobalEntry .1.3.6.1.4.1.4253.1.90.1 |
mibl2TunnelGlobalEntryA mibl2TunnelGlobal entry containing objects that
maps to the parameters of mibl2TunnelGlobal profile. Mibl2TunnelGlobalEntry .1.3.6.1.4.1.4253.1.90.1.1 |
l2TunnelGlobal-Index-oro INTEGER .1.3.6.1.4.1.4253.1.90.1.1.1 |
l2TunnelGlobal-PptpEnabledEnables or disables support for the Point to Point Tunneling Protocol (PPTP).rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.2 |
l2TunnelGlobal-ServerProfileRequiredWhen set to 'YES', it requires that an enabled TUNNEL-SERVER profile exists before a tunnel is created. When set to 'NO', if a matching profile can't be found, the server is assumed enabled and the tunnel can be created.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.3 |
l2TunnelGlobal-L2tpModeLayer 2 Tunneling Protocol operating mode.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.4 |
l2TunnelGlobal-L2tpAuthEnabledEnables or disables L2TP tunnel authentication.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.5 |
l2TunnelGlobal-L2tpRxWindowThis value is the advertised L2TP receive window size for the data channel. A value of zero indicates that this box will ask for no flow control for inbound L2TP payloads.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.6 |
l2TunnelGlobal-MaxLnsClientsThe maximum number of clients that this box is allowed to support in LNS mode.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.7 |
l2TunnelGlobal-L2tpSystemNameSent to the remote tunnel endpoint during L2TP session establishment. An empty string indicates that the actual system name plus domain name will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.90.1.1.8 |
l2TunnelGlobal-L2tpConfig-FirstRetryTimerThe first interval before the L2TP Control Channel Transport Layer retransmits a control packet, in milliseconds. Subsequent retransmissions will increase the interval.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.9 |
l2TunnelGlobal-L2tpConfig-RetryCountThe maximum number of times the L2TP Control Channel Transport Layer will retransmit a control packet.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.10 |
l2TunnelGlobal-L2tpConfig-HelloTimerThe number of seconds that an L2TP Control Channel will be idle before sending a HELLO packet. If set to 0, HELLO packets will not be sent.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.11 |
l2TunnelGlobal-L2tpConfig-ControlConnectEstablishTimerThe timeout interval for L2TP to establish a control connection session with its peer, in seconds.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.12 |
l2TunnelGlobal-L2tpConfig-LacIncomingCallTimerThe timeout interval for the LAC to setup an incoming call with the LNS, in seconds.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.13 |
l2TunnelGlobal-L2tpConfig-LnsIncomingCallTimerThe timeout interval for the LNS to setup an incoming call with the LAC, in seconds.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.14 |
l2TunnelGlobal-L2tpConfig-BaseUdpPortThis value defines the base L2TP udp port to use for a card. A value of zero (the default) means that a non private port will be allocated dynamically.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.15 |
l2TunnelGlobal-L2tpConfig-DialoutAuthLnsRestricts the LAC to accept dialout requests only from the LNS which has authenticated during the tunnel setup.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.16 |
l2TunnelGlobal-L2tpConfig-DialoutSendProfileNameEnables the LNS to send the Connection Profile Name VSA along with the Dialout Request.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.17 |
l2TunnelGlobal-L2tpConfig-AcctTunnelConnectionEncodingEncoding of the Acct-Tunnel-Connection radius attributerw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.18 |
l2TunnelGlobal-L2fModeLayer Two Forwarding operating mode.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.20 |
l2TunnelGlobal-L2fSystemNameSent to the remote tunnel endpoint during L2F tunnel establishment. An empty string indicates that the actual system name plus domain name will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.90.1.1.21 |
l2TunnelGlobal-L2fRetryCountThe number of times L2F will resend control packets. The standard value as outlined in RFC2341 is 4.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.22 |
l2TunnelGlobal-L2fRetryIntervalThe interval between retries in seconds. A value of 0 (zero) means that an adaptative retry interval based on the retry number is used.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.23 |
l2TunnelGlobal-L2fTunnelSecretThe authentication method used on the NAS to authenticate the home Gateway during L2F Tunnel establishment.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.24 |
l2TunnelGlobal-L2fIgnoreMidSequenceDetermines whether a common sequence number is used for the L2F_PROTO PDUs for both the tunnel (MID=0) and the client connection.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.25 |
l2TunnelGlobal-Action-orw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.26 |
l2TunnelGlobal-L2tpConfig-VerifyRemoteHostNameIf Tunnel Authentication is enabled, also verify the remote peer HostName AVP.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.27 |
l2TunnelGlobal-L2tpConfig-DefaultTunnelServerDefault tunnel server profile name. Used for dialout only.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.90.1.1.28 |
l2TunnelGlobal-L2tpConfig-TunnelServerPreSccrqLookupWhen Tunnel Authentication is enabled, this parameter controls whether a lookup is to be done for the Tunnel-Server profile before sending of the SCCRQ.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.29 |
l2TunnelGlobal-L2tpConfig-SuppressEndpointDiscriminatorWhen set to 'yes', in the absence of a MRRU LCP option, the LAC will suppress the Endpoint Discriminator LCP option from the LCP AVPs sent to the LNS.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.30 |
l2TunnelGlobal-L2tpConfig-LnsNasPortTypeLNS NAS Port Type reporting. If Virtual, report virtual. If PortTypeAvp, report as specified by LAC.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.31 |
l2TunnelGlobal-L2tpConfig-DigitalAsyncNasPortTypeIf LNS Acct NPT is set to PortTypeAvp but the LAC did not supply the NAS Port Type, report digital-async calls as specified here.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.32 |
l2TunnelGlobal-L2tpConfig-RetryTimerModeThe mode in which the L2TP Control Channel Transport Layer retry timer operates. The default is Linear.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.33 |
l2TunnelGlobal-L2tpConfig-MaxRetryTimerThe maximum timeout interval used by the L2TP Control Channel Transport Layer before retransmitting a packet, in milliseconds. 0 indicates no limit.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.34 |
l2TunnelGlobal-L2tpConfig-DataPktUdpCksumIf IP-GLOBAL:udp-cksum is set to TRUE, setting this field to 'no' disables the locally originated UDP checksum calculation for L2TP data packets.rw Enumeration .1.3.6.1.4.1.4253.1.90.1.1.35 |
l2TunnelGlobal-L2tpConfig-MaxCallsPerTunnelThis value restricts the maximum number of calls that a tunnel can have at a given instance of time. When set to 0 the limit is removed.rw INTEGER .1.3.6.1.4.1.4253.1.90.1.1.36 |
mibtunnelServer OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.91 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.91 |
mibtunnelServerTableA list of mibtunnelServer profile entries. SEQUENCE OF MibtunnelServerEntry .1.3.6.1.4.1.4253.1.91.1 |
mibtunnelServerEntryA mibtunnelServer entry containing objects that
maps to the parameters of mibtunnelServer profile. MibtunnelServerEntry .1.3.6.1.4.1.4253.1.91.1.1 |
tunnelServer-ServerEndpointThe name of the remote tunnel endpoint. It should be the hostname or IP address that identifies the remote tunnel server, as required by the specific tunnel protocol. Usually, it matches the 'Tunnel-Server-Endpoint' RADIUS attribute but it may be different.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.1 |
tunnelServer-EnabledA tunnel server can be disabled by setting this field to 'no'.rw Enumeration .1.3.6.1.4.1.4253.1.91.1.1.2 |
tunnelServer-SharedSecretThe shared secret (password) needed to bring up an L2TP Control Channel or an L2F tunnel with this server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.3 |
tunnelServer-MaxClientsThe maximum number of clients that this tunnel may carry.rw INTEGER .1.3.6.1.4.1.4253.1.91.1.1.4 |
tunnelServer-ValidCallTypesThe valid call types that can be carried on this tunnel.rw Enumeration .1.3.6.1.4.1.4253.1.91.1.1.5 |
tunnelServer-IpsecProfileName of the ipsec profile which should be used to build the IPSec Scheme for the IP Packets sent and received from this server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.6 |
tunnelServer-ClientAuthIdThe system name used by the Tunnel Initiator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. In L2TP, this name is sent on the SCCRQ command. Used on L2TP and L2F.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.7 |
tunnelServer-ServerAuthIdThe system name used by the Tunnel Terminator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. In L2TP, this name is sent on the SCCRP command. Used on L2TP and L2F.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.8 |
tunnelServer-DialoutOptions-EnabledEnables/Disables L2TP Dialout from this tunnel-server.rw Enumeration .1.3.6.1.4.1.4253.1.91.1.1.9 |
tunnelServer-Action-orw Enumeration .1.3.6.1.4.1.4253.1.91.1.1.16 |
tunnelServer-DialoutOptions-DialNumberLookupIf enabled, uses the dial number passed by the LNS to lookup a connection profile.rw Enumeration .1.3.6.1.4.1.4253.1.91.1.1.17 |
tunnelServer-DialoutOptions-LookupPrefixA short text string prepended to the username portion of a RADIUS L2TP dial number lookup request. It is used to distinguish between DNIS and CLID authentication requests and L2TP lookup request.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.18 |
tunnelServer-DialoutOptions-DialNumberPrefixA number to be prepended to the dialout number when placing the call. It can be used to provide locally required prefixes such as trunk numbers.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.1.1.19 |
mibtunnelServer-DialoutOptions-DefaultCallMappingTableA list of mibtunnelServer__dialout_options__default_call_mapping profile entries. SEQUENCE OF MibtunnelServer-DialoutOptions-DefaultCallMappingEntry .1.3.6.1.4.1.4253.1.91.2 |
mibtunnelServer-DialoutOptions-DefaultCallMappingEntryA mibtunnelServer__dialout_options__default_call_mapping entry containing objects that
maps to the parameters of mibtunnelServer__dialout_options__default_call_mapping profile. MibtunnelServer-DialoutOptions-DefaultCallMappingEntry .1.3.6.1.4.1.4253.1.91.2.1 |
tunnelServer-DialoutOptions-DefaultCallMapping-ServerEndpointro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.91.2.1.1 |
tunnelServer-DialoutOptions-DefaultCallMapping-Index-oro INTEGER .1.3.6.1.4.1.4253.1.91.2.1.2 |
tunnelServer-DialoutOptions-DefaultCallMapping-ValidEntryWhen FALSE, this entry should be skipped when mapping calls.rw Enumeration .1.3.6.1.4.1.4253.1.91.2.1.3 |
tunnelServer-DialoutOptions-DefaultCallMapping-BearerTypeThe bearer type used for the outgoing call.rw Enumeration .1.3.6.1.4.1.4253.1.91.2.1.4 |
tunnelServer-DialoutOptions-DefaultCallMapping-FramingTypeThe framing type used for the outgoing call.rw Enumeration .1.3.6.1.4.1.4253.1.91.2.1.5 |
tunnelServer-DialoutOptions-DefaultCallMapping-DataServiceThe type of data service used for outgoing call for this bearer and framing type combination.rw Enumeration .1.3.6.1.4.1.4253.1.91.2.1.6 |