ASCEND-MIBINTEGRITY-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBINTEGRITY-MIB.
18
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
mibsystemIntegrityProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.81 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.81 |
mibsystemIntegrityProfileTableA list of mibsystemIntegrityProfile profile entries. SEQUENCE OF MibsystemIntegrityProfileEntry .1.3.6.1.4.1.4253.1.81.1 |
mibsystemIntegrityProfileEntryA mibsystemIntegrityProfile entry containing objects that
maps to the parameters of mibsystemIntegrityProfile profile. MibsystemIntegrityProfileEntry .1.3.6.1.4.1.4253.1.81.1.1 |
systemIntegrityProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.81.1.1.1 |
systemIntegrityProfile-EnableCentralizedDetectionMaster can also do cetralized integrity for the whole system on the top of all cards doing their own distributed integrity testing. The recommended value is no. By default all LIMs do correction every few hours and that should be enough for LIMs.rw Enumeration .1.3.6.1.4.1.4253.1.81.1.1.2 |
systemIntegrityProfile-RatioCentralizedDetectionIf centralized detection is enabled then the ratio of problem detection between the Master and all other cards. For example if ratio is 5 then master CM would do 5 self tests before triggering centralized LIM test.rw INTEGER .1.3.6.1.4.1.4253.1.81.1.1.3 |
systemIntegrityProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.81.1.1.4 |
mibsystemIntegrityProfile-IntegrityConfigTableA list of mibsystemIntegrityProfile__integrity_config profile entries. SEQUENCE OF MibsystemIntegrityProfile-IntegrityConfigEntry .1.3.6.1.4.1.4253.1.81.2 |
mibsystemIntegrityProfile-IntegrityConfigEntryA mibsystemIntegrityProfile__integrity_config entry containing objects that
maps to the parameters of mibsystemIntegrityProfile__integrity_config profile. MibsystemIntegrityProfile-IntegrityConfigEntry .1.3.6.1.4.1.4253.1.81.2.1 |
systemIntegrityProfile-IntegrityConfig-Index-oro INTEGER .1.3.6.1.4.1.4253.1.81.2.1.1 |
systemIntegrityProfile-IntegrityConfig-Index1-oro INTEGER .1.3.6.1.4.1.4253.1.81.2.1.2 |
systemIntegrityProfile-IntegrityConfig-EnableContinuousDetectionMAGIC testing, detection and correction enabled in continous mode? It is recommended yes for the CMs and no for all LIMs.rw Enumeration .1.3.6.1.4.1.4253.1.81.2.1.3 |
systemIntegrityProfile-IntegrityConfig-DetectionIntervalDetection interval in miliseconds for continuous detection. The system tries to detect any abnormality at defined miliseconds interval. The recommended value is 100 ms for CMs.rw INTEGER .1.3.6.1.4.1.4253.1.81.2.1.4 |
systemIntegrityProfile-IntegrityConfig-OnlyOneCorrectionIf yes then apply MAGIC correction only once. If no then apply MAGIC correction multiple times in a row. Only one correction is recommended.rw Enumeration .1.3.6.1.4.1.4253.1.81.2.1.5 |
systemIntegrityProfile-IntegrityConfig-CorrectionFactorMAGIC correction factor. How many detection of problems result in to a correction. The system keeps history of past 20 tests. If correction-factor is 1 then only one failure out of past 20 tests would result in a correction. If correction-factor is 5 then 5 failure out of 20 would result in a correction.rw INTEGER .1.3.6.1.4.1.4253.1.81.2.1.6 |
systemIntegrityProfile-IntegrityConfig-AutoCorrectionEnableIf auto correction is enabled for this card or not. Applicable only for LIM cards. LIM tries to correct problem every few hours automatically.rw Enumeration .1.3.6.1.4.1.4253.1.81.2.1.7 |
systemIntegrityProfile-IntegrityConfig-IntervalAutoCorrectionAll slot cards (LIM) automatically tries to correct themselves at specified interval in mili seconds. Some LIMs are capable of doing detection before correction. Those LIMs would try to detect the problem and then correct it.rw INTEGER .1.3.6.1.4.1.4253.1.81.2.1.8 |