ASCEND-MIBINET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBINET-MIB.
67
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
67 total| Object Name |
|---|
mibinternetProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.1 |
mibinternetProfileTableA list of mibinternetProfile profile entries. SEQUENCE OF MibinternetProfileEntry .1.3.6.1.4.1.4253.1.1.1 |
mibinternetProfileEntryA mibinternetProfile entry containing objects that
maps to the parameters of mibinternetProfile profile. MibinternetProfileEntry .1.3.6.1.4.1.4253.1.1.1.1 |
internetProfile-StationThe name of the host we will be communicating with. This name is used as part of the authentication process when authentication is being used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.1 |
internetProfile-ActiveA profile can be disabled by setting this field to no. There is no difference between an inactive profile and no profile at all to the remainder of the code.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.2 |
internetProfile-EncapsulationProtocolThe encapsulation protocol to be used when communicating with the named station.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.3 |
internetProfile-CalledNumberTypeIndication of whether national number, international number, etc. is specified.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.4 |
internetProfile-DialNumberThe phone number of the named station.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.5 |
internetProfile-ClidThe calling line number for authentication.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.6 |
internetProfile-IpOptions-IpRoutingEnabledEnable/disable IP routing for this connection.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.7 |
internetProfile-IpOptions-VjHeaderPredictionEnable/disable Van Jacabson TCP Header prediction processing on this connection if supported by the selected encapsulation protocol.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.8 |
internetProfile-IpOptions-RemoteAddressThe remote address with netmask of the named host.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.9 |
internetProfile-IpOptions-NetmaskRemoteThe netmask of the remote address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.10 |
internetProfile-IpOptions-LocalAddressThe interface address with netmask, if required, of the local end. If left zero the interface is assumed to be an unnumbered interface.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.11 |
internetProfile-IpOptions-NetmaskLocalThe netmask of the local interface address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.12 |
internetProfile-IpOptions-RoutingMetricThe routing metric, typically measured in number of hops, to be used in the routing table entry created for this connection when the connection is active.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.13 |
internetProfile-IpOptions-PreferenceThe preference used for comparing this route to other routes. Preference has a higher priority than metric. As with the metric field, the lower the number, the higher the preference.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.14 |
internetProfile-IpOptions-DownPreferenceThe preference used for comparing the down-metric route to other routes. Preference has a higher priority than metric. As with the metric field, the lower the number, the higher the preference.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.15 |
internetProfile-IpOptions-PrivateRouteEnable/disable distribution of the route created for this connection via routing protocols. Private routes are used internally, but never advertized to the outside world.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.16 |
internetProfile-IpOptions-MulticastAllowedEnable this connection as a multicast traffic client.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.17 |
internetProfile-IpOptions-AddressPoolThe number of the address pool from which an address for this host should be obtained when using assigned addresses.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.18 |
internetProfile-IpOptions-IpDirectThe address of the next-hop when IP direct routing is used.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.19 |
internetProfile-IpOptions-RipSpecify if RIP or RIP-2 should be used over this connection and if used in both directions or not.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.20 |
internetProfile-IpOptions-RouteFilterThe name of this filter. All filters are referenced by name so a name must be assigned to active filters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.21 |
internetProfile-IpOptions-SourceIpCheckEnable/disable source ip checking. Packets with source ip address which doesn't match with negotiated remote ip address will be dropped.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.22 |
internetProfile-IpOptions-OspfOptions-ActiveIs OSPF active on this interface.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.23 |
internetProfile-IpOptions-OspfOptions-AreaThe area that this interface belongs to.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.24 |
internetProfile-IpOptions-OspfOptions-AreaTypeThe type of Area. Normal, Stub, NSSArw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.25 |
internetProfile-IpOptions-OspfOptions-HelloIntervalThe hello interval (seconds).rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.26 |
internetProfile-IpOptions-OspfOptions-DeadIntervalThe dead interval (seconds).rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.27 |
internetProfile-IpOptions-OspfOptions-PriorityThe priority of this router in DR elections.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.28 |
internetProfile-IpOptions-OspfOptions-AuthenTypeThe type of OSPF authentication in effect.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.29 |
internetProfile-IpOptions-OspfOptions-AuthKeyThe authentication key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.30 |
internetProfile-IpOptions-OspfOptions-KeyIdThe key identifier for MD5 authentication.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.31 |
internetProfile-IpOptions-OspfOptions-CostThe output cost.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.32 |
internetProfile-IpOptions-OspfOptions-DownCostThe output cost when the link is physically down but virtually up.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.33 |
internetProfile-IpOptions-OspfOptions-AseTypeThe OSPF ASE type of this LSA.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.34 |
internetProfile-IpOptions-OspfOptions-AseTagThe OSPF ASE tag of this link.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.35 |
internetProfile-IpOptions-OspfOptions-TransitDelayThe estimated transit delay (seconds).rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.36 |
internetProfile-IpOptions-OspfOptions-RetransmitIntervalThe retransmit time (seconds).rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.37 |
internetProfile-IpOptions-OspfOptions-NonMulticastUse direct addresses instead of multicast addresses.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.38 |
internetProfile-IpOptions-MulticastRateLimitThe multicast rate limit in seconds.rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.39 |
internetProfile-IpOptions-MulticastGroupLeaveDelayThe multicast group leave in seconds. This is only for IGMP Version 2rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.40 |
internetProfile-IpOptions-ClientDnsPrimaryAddrUser specific DNS Primary Address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.41 |
internetProfile-IpOptions-ClientDnsSecondaryAddrUser specific DNS Secondary Address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.42 |
internetProfile-IpOptions-ClientDnsAddrAssignA flag to control assigning user specific DNS Addresses.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.43 |
internetProfile-IpOptions-ClientDefaultGatewayThe default gateway to be used for traffic from this connection, if no specific route is found in the routing table. If left zero, the system's default route will be used.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.44 |
internetProfile-IpOptions-TosOptions-ActiveActivate type of service for this connection.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.45 |
internetProfile-IpOptions-TosOptions-PrecedenceTag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.46 |
internetProfile-IpOptions-TosOptions-TypeOfServiceTag the type of service field in the TOS octet of IP datagram header with this value when match occurs.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.47 |
internetProfile-IpOptions-TosOptions-ApplyToDefine how the type-of-service applies to data flow for this connection.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.48 |
internetProfile-IpOptions-TosFilterThe name of type-of-service filter. All filters are referenced by name so a name must be assigned to active filters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.49 |
internetProfile-IpOptions-OspfOptions-NetworkTypeThe type of network attachment.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.250 |
internetProfile-IpOptions-OspfOptions-PollIntervalThe poll interval for non-broadcast multi-access network (seconds).rw INTEGER .1.3.6.1.4.1.4253.1.1.1.1.251 |
internetProfile-IpOptions-OspfOptions-Md5AuthKeyThe MD5 authentication key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.252 |
internetProfile-SubAddressThe sub-address extension to the dialed number of the station.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.292 |
internetProfile-IpOptions-ClientWinsPrimaryAddrUser specific WINS Primary Address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.293 |
internetProfile-IpOptions-ClientWinsSecondaryAddrUser specific WINS Secondary Address.rw IpAddress .1.3.6.1.4.1.4253.1.1.1.1.294 |
internetProfile-IpOptions-ClientWinsAddrAssignA flag to control assigning user specific WINS Addresses.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.295 |
internetProfile-IpOptions-PrivateRouteTablePrivate route table ID for this connectionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.296 |
internetProfile-IpOptions-PrivateRouteProfileRequiredParameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private route profile cannot be found. If set to no, the call will be allowed to complete, even if the private route profile cannot be found.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.297 |
internetProfile-IpOptions-NatProfileNameThe profile to use for NAT translations on this connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.419 |
internetProfile-AutoProfilesThis parameter enables or disables automatic profile creation. Currently only the Stinger IDSL provides this capability for PPP Circuits and Frame Relay Circuits.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.420 |
internetProfile-IpOptions-TosOptions-MarkingTypeSelect type of packet marking.rw Enumeration .1.3.6.1.4.1.4253.1.1.1.1.459 |
internetProfile-IpOptions-TosOptions-DscpDSCP tag to be used in marking of the packets (if marking-type = dscp).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.1.1.1.460 |
internetProfile-IpOptions-AddressRealmUsed to determine which interfaces and WANs are connected to the same address space
::= { mibinternetProfileEntry 421 }
internetProfile-IpxOptions-IpxRoutingEnabled OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw INTEGER .mibinternetProfile-IpxOptions-IpxSapHsProxyNetEntry.3 |