ASCEND-MIBIMAGROUP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBIMAGROUP-MIB.
28
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
mibimaGroupConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.23 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.23 |
mibimaGroupConfigTableA list of mibimaGroupConfig profile entries. SEQUENCE OF MibimaGroupConfigEntry .1.3.6.1.4.1.4253.1.23.1 |
mibimaGroupConfigEntryA mibimaGroupConfig entry containing objects that
maps to the parameters of mibimaGroupConfig profile. MibimaGroupConfigEntry .1.3.6.1.4.1.4253.1.23.1.1 |
imaGroupConfig-NameName of IMA Group Config profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.23.1.1.1 |
imaGroupConfig-ActiveTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.2 |
imaGroupConfig-NailedGroupThe nailed group to which this IMA group belongs torw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.3 |
imaGroupConfig-GroupSymmetryModeSymmetry mode of group to which this link belongs torw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.4 |
imaGroupConfig-VersionIMA spec versionrw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.5 |
imaGroupConfig-DoVersionFallbackAutomatically fall back to v 1.0 if FE is detected to be v 1.0, otherwise move to configAborted staterw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.6 |
imaGroupConfig-Lasrenable/disable LASR (Link addition and slow recovery) proceduresrw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.7 |
imaGroupConfig-NeTxClkModeGroup Clocking moderw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.8 |
imaGroupConfig-TxMinNumLinksMinimum Number of Tx Links to be active for group to remain in operational staterw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.9 |
imaGroupConfig-RxMinNumLinksMinimum Number of Rx Links to be active for group to remain in operational staterw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.10 |
imaGroupConfig-ImaIdIMA ID of the grouprw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.11 |
imaGroupConfig-FrameLengthFrame length for the group (M)rw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.12 |
imaGroupConfig-DiffDelayMaxMaximum differential delay of group in msecrw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.13 |
imaGroupConfig-CheckFarEndImaIdcheck/compare the expected-far-end-ima-id with the far-end IMA ID during group start uprw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.14 |
imaGroupConfig-ExpectedFarEndImaIdif check-far-end-ima-id set to yes, then the far-end IMA ID is compared against this number during group startup, GSM moves to ConfigAborted if it does not matchrw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.15 |
imaGroupConfig-FarEndCheckFrameLengthcheck/compare the Expected frame length with the far-end frame length during group start uprw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.16 |
imaGroupConfig-ExpectedFarEndFrameLengthIf far-end-check-frame-length is set to yes, then the far-end frame length is compared against this number during group startup, GSM moves to ConfigAborted, if it does not match.rw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.17 |
imaGroupConfig-AtmIfDelayminimum time (in seconds) between the subsequent ATM layer (ie IDCR changes) indicationsrw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.18 |
imaGroupConfig-TppTestLinkDesignate a link index as the test link for use in the Test Pattern Procedure.rw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.19 |
imaGroupConfig-TppTestPatternThe test pattern transmitted in the ICP cell (octet 17) on the link during the IMA Test Pattern Procedure.rw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.20 |
imaGroupConfig-TppStateEnable or disable the Test Pattern Procedure.rw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.21 |
imaGroupConfig-VpSwitchingVpiThe Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.rw INTEGER .1.3.6.1.4.1.4253.1.23.1.1.22 |
imaGroupConfig-Action-orw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.23 |
imaGroupConfig-IgnoreLineupIgnore line up value for this IMA Group.rw Enumeration .1.3.6.1.4.1.4253.1.23.1.1.24 |