Home/Catalog/ASCEND-MIBETHER-MIB

ASCEND-MIBETHER-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for ASCEND-MIBETHER-MIB.

Objects

Active

Status

Dependencies

Imported Objects

ASCEND-MIB

RFC1155-SMI

RFC-1212

Objects

29 total

Object Name	Syntax	OID
mibethernetInterfaceProfile OBJECT IDENTIFIER `.1.3.6.1.4.1.4253.1.76`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4253.1.76`
RFC1155-SMI Unknown `.1.3.6.1.4.1.4253.1.76`	Unknown	`.1.3.6.1.4.1.4253.1.76`
mibethernetInterfaceProfileTableA list of mibethernetInterfaceProfile profile entries. SEQUENCE OF MibethernetInterfaceProfileEntry `.1.3.6.1.4.1.4253.1.76.1`	SEQUENCE OF MibethernetInterfaceProfileEntry	`.1.3.6.1.4.1.4253.1.76.1`
mibethernetInterfaceProfileEntryA mibethernetInterfaceProfile entry containing objects that maps to the parameters of mibethernetInterfaceProfile profile. MibethernetInterfaceProfileEntry `.1.3.6.1.4.1.4253.1.76.1.1`	MibethernetInterfaceProfileEntry	`.1.3.6.1.4.1.4253.1.76.1.1`
ethernetInterfaceProfile-Shelf-oro INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.1`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.1`
ethernetInterfaceProfile-Slot-oro INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.2`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.2`
ethernetInterfaceProfile-Item-oro INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.3`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.3`
ethernetInterfaceProfile-InterfaceAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.4`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.4`
ethernetInterfaceProfile-InterfaceAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.5`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.5`
ethernetInterfaceProfile-InterfaceAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.6`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.6`
ethernetInterfaceProfile-LinkStateEnabledTRUE if the link state is honored, otherwise FALSE.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.7`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.7`
ethernetInterfaceProfile-EnabledTRUE if the interface is enabled, otherwise FALSE.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.8`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.8`
ethernetInterfaceProfile-EtherIfTypeThe type of phyical interrface, UTP, COAX, AUIro Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.9`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.9`
ethernetInterfaceProfile-FilterThis field is for non-tnt onlyrw INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.10`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.10`
ethernetInterfaceProfile-BridgingEnabledTRUE if this interface is to support bridging.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.11`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.11`
ethernetInterfaceProfile-FilterNameThe name of this filter. All filters are referenced by name so a name must be assigned to active filters.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.4253.1.76.1.1.12`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.4253.1.76.1.1.12`
ethernetInterfaceProfile-DuplexModeSet the 100BaseT physical interface to full or half duplex mode. Only valid for the 100BaseT port.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.13`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.13`
ethernetInterfaceProfile-PppoeOptions-PppoeEnable or disable the ability to establish PPP over Ethernet session over this interface.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.14`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.14`
ethernetInterfaceProfile-PppoeOptions-BridgeNonPppoeStates wheather to bridge all other protocols except PPPoE on this interface or not.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.15`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.15`
ethernetInterfaceProfile-BridgingOptions-BridgingGroupSelect the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces belonging to the same group.rw INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.16`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.16`
ethernetInterfaceProfile-BridgingOptions-DialOnBroadcastEnable/disable outdial when broadcast frames are received.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.17`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.17`
ethernetInterfaceProfile-BridgingOptions-IpxSpoofingSelects the IPX spoofing mode when bridging.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.18`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.18`
ethernetInterfaceProfile-BridgingOptions-SpoofingTimeoutIPX NetWare connection timeout value.rw INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.19`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.19`
ethernetInterfaceProfile-BridgingOptions-Fill2filler to get to 32 bit boundaryro INTEGER `.1.3.6.1.4.1.4253.1.76.1.1.20`	INTEGER	`.1.3.6.1.4.1.4253.1.76.1.1.20`
ethernetInterfaceProfile-BridgingOptions-BridgeTypeFor the P25 user interface.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.21`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.21`
ethernetInterfaceProfile-BridgingOptions-EgressEnable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.22`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.22`
ethernetInterfaceProfile-MediaSpeedMbitSet the BaseT physical interface media speed to 100mb or 10mb. Only valid for the BaseT port on an ether3-card.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.23`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.23`
ethernetInterfaceProfile-AutoNegotiateSet the auto-negotiation option. Only valid for enet3nd-card.rw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.24`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.24`
ethernetInterfaceProfile-Action-orw Enumeration `.1.3.6.1.4.1.4253.1.76.1.1.25`	Enumeration	`.1.3.6.1.4.1.4253.1.76.1.1.25`