ASCEND-MIBE3ATMNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBE3ATMNET-MIB.
58
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
mibe3AtmNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.15 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.15 |
mibe3AtmNetworkProfileTableA list of mibe3AtmNetworkProfile profile entries. SEQUENCE OF Mibe3AtmNetworkProfileEntry .1.3.6.1.4.1.4253.1.15.1 |
mibe3AtmNetworkProfileEntryA mibe3AtmNetworkProfile entry containing objects that
maps to the parameters of mibe3AtmNetworkProfile profile. Mibe3AtmNetworkProfileEntry .1.3.6.1.4.1.4253.1.15.1.1 |
e3AtmNetworkProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.15.1.1.1 |
e3AtmNetworkProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.15.1.1.2 |
e3AtmNetworkProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.15.1.1.3 |
e3AtmNetworkProfile-NameFor future use. The current design does not use the name field but instead references E3-ATM lines by the physical address; we may in the future support referencing E3-ATM lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the E3-ATM line physical address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.15.1.1.4 |
e3AtmNetworkProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.5 |
e3AtmNetworkProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.6 |
e3AtmNetworkProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.15.1.1.7 |
e3AtmNetworkProfile-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.8 |
e3AtmNetworkProfile-LineConfig-TrunkGroupThe trunk group to which this line is assigned. 0 means this line is not part of a trunk group.rw INTEGER .1.3.6.1.4.1.4253.1.15.1.1.9 |
e3AtmNetworkProfile-LineConfig-NailedGroupA number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.rw INTEGER .1.3.6.1.4.1.4253.1.15.1.1.10 |
e3AtmNetworkProfile-LineConfig-LoopbackLoopback mode.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.14 |
e3AtmNetworkProfile-LineConfig-HighTxOutputTRUE if the E3 cable length is more than 300 ft, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.15 |
e3AtmNetworkProfile-LineConfig-FramerModeThe E3 ATM framer mode.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.16 |
e3AtmNetworkProfile-LineConfig-VpiVciRangeThe E3 ATM valid VPI/VCI value range.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.17 |
e3AtmNetworkProfile-LineConfig-CellPayloadScrambleTRUE if the cell payload scrambling is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.18 |
e3AtmNetworkProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.19 |
e3AtmNetworkProfile-LineConfig-ReceiveEqualizationTRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 300 ft.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.20 |
e3AtmNetworkProfile-LineConfig-ClockSourceDetermine whether the 8KHz clock from the E3-ATM board is eligible to be used as the system-wide TDM clock source.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.21 |
e3AtmNetworkProfile-LineConfig-ClockPriorityClock priority assigned to the E3-ATM line. Used to select a particular E3 line as clock source.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.22 |
e3AtmNetworkProfile-SparePhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.23 |
e3AtmNetworkProfile-SparePhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.24 |
e3AtmNetworkProfile-SparePhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.15.1.1.25 |
e3AtmNetworkProfile-SparingModeTrunk port sparing operational mode for this port.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.26 |
e3AtmNetworkProfile-IgnoreLineupIgnore line up value for this port.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.27 |
e3AtmNetworkProfile-LineConfig-StatusChangeTrapEnableWhen set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No.rw Enumeration .1.3.6.1.4.1.4253.1.15.1.1.28 |
mibe3AtmNetworkProfile-LineConfig-TrafficShapersTableA list of mibe3AtmNetworkProfile__line_config__traffic_shapers profile entries. SEQUENCE OF Mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry .1.3.6.1.4.1.4253.1.15.2 |
mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntryA mibe3AtmNetworkProfile__line_config__traffic_shapers entry containing objects that
maps to the parameters of mibe3AtmNetworkProfile__line_config__traffic_shapers profile. Mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry .1.3.6.1.4.1.4253.1.15.2.1 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.15.2.1.1 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.15.2.1.2 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-Item-oro INTEGER .1.3.6.1.4.1.4253.1.15.2.1.3 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-Index-oro INTEGER .1.3.6.1.4.1.4253.1.15.2.1.4 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-EnabledTRUE if the shaper is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.15.2.1.5 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-BitRateWhat is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.rw INTEGER .1.3.6.1.4.1.4253.1.15.2.1.6 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRateWhat is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.rw INTEGER .1.3.6.1.4.1.4253.1.15.2.1.7 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSizeWhat is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper.rw INTEGER .1.3.6.1.4.1.4253.1.15.2.1.8 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-AggregateIf FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally.rw Enumeration .1.3.6.1.4.1.4253.1.15.2.1.9 |
e3AtmNetworkProfile-LineConfig-TrafficShapers-PriorityA number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest.rw INTEGER .1.3.6.1.4.1.4253.1.15.2.1.10 |
mibe3AtmNetworkProfile-LineConfig-IncomingVCCsTableA list of mibe3AtmNetworkProfile__line_config__incomingVCCs profile entries. SEQUENCE OF Mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry .1.3.6.1.4.1.4253.1.15.3 |
mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntryA mibe3AtmNetworkProfile__line_config__incomingVCCs entry containing objects that
maps to the parameters of mibe3AtmNetworkProfile__line_config__incomingVCCs profile. Mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry .1.3.6.1.4.1.4253.1.15.3.1 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.15.3.1.1 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.15.3.1.2 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-oro INTEGER .1.3.6.1.4.1.4253.1.15.3.1.3 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-oro INTEGER .1.3.6.1.4.1.4253.1.15.3.1.4 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-EnabledTRUE if the item is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.15.3.1.5 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-VpiA number that identifies the Virtual Path Identifier of this item.rw INTEGER .1.3.6.1.4.1.4253.1.15.3.1.6 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVciA number that identifies the starting Virtual Channel Identifier of this item.rw INTEGER .1.3.6.1.4.1.4253.1.15.3.1.7 |
e3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVciA number that identifies the ending Virtual Channel Identifier of this item.rw INTEGER .1.3.6.1.4.1.4253.1.15.3.1.8 |
mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiTableA list of mibe3AtmNetworkProfile__line_config__vc_switching_vpi profile entries. SEQUENCE OF Mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry .1.3.6.1.4.1.4253.1.15.4 |
mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntryA mibe3AtmNetworkProfile__line_config__vc_switching_vpi entry containing objects that
maps to the parameters of mibe3AtmNetworkProfile__line_config__vc_switching_vpi profile. Mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry .1.3.6.1.4.1.4253.1.15.4.1 |
e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.15.4.1.1 |
e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.15.4.1.2 |
e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-oro INTEGER .1.3.6.1.4.1.4253.1.15.4.1.3 |
e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-oro INTEGER .1.3.6.1.4.1.4253.1.15.4.1.4 |
e3AtmNetworkProfile-LineConfig-VcSwitchingVpiVPI(s) to be used for the VC switching (VCC). It should always contain VPI 0 for VC switching. All VC switching VPI have similar valid VCI range which is determined by 'vpi-vci-range' attribute. Rest of the VPIs will be used for the VP switching. The user needs to understand that adding a VPI in a list of VC switching VPI will allocate more VCCs for this port. The user needs to make sure that VCCs for the other ports have been reduced to accommodate increase in VCC for this port because system can support only 32k VCCs on all trunk ports combined. If vci-range is 4k and VPI 0 is the only VPI doing VC switching for this port than this port occupies 4k VCCs. If user adds VPI 1 to the list of VPIs to do VCC then total 8k VCCs are occupied for this port. System will reject the configuration if user tries to use more than 32k VCCs for all trunk ports combined. ANY CHANGES IN A LIST OF VPIs WILL BE EFFECTIVE IMMEDIATLY. IN ORDER TO DO THAT ALL CONNECTIONS WITHIN THIS SYSTEM WILL BE DROPPED AND REESTABLISHED.rw INTEGER .1.3.6.1.4.1.4253.1.15.4.1.5 |