ASCEND-MIBDS1ATMNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBDS1ATMNET-MIB.
47
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
mibds1AtmNetworkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.25 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.25 |
mibds1AtmNetworkProfileTableA list of mibds1AtmNetworkProfile profile entries. SEQUENCE OF Mibds1AtmNetworkProfileEntry .1.3.6.1.4.1.4253.1.25.1 |
mibds1AtmNetworkProfileEntryA mibds1AtmNetworkProfile entry containing objects that
maps to the parameters of mibds1AtmNetworkProfile profile. Mibds1AtmNetworkProfileEntry .1.3.6.1.4.1.4253.1.25.1.1 |
ds1AtmNetworkProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.25.1.1.1 |
ds1AtmNetworkProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.25.1.1.2 |
ds1AtmNetworkProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.25.1.1.3 |
ds1AtmNetworkProfile-NameName of IMA Line Config profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.25.1.1.4 |
ds1AtmNetworkProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.5 |
ds1AtmNetworkProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.6 |
ds1AtmNetworkProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.7 |
ds1AtmNetworkProfile-EnabledTRUE if the line is enabled, otherwise FALSE.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.8 |
ds1AtmNetworkProfile-LineConfig-FrameTypeThe super-framing mode that is used on the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.9 |
ds1AtmNetworkProfile-LineConfig-EncodingThe layer 1 line encoding used for the physical link(s).rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.10 |
ds1AtmNetworkProfile-LineConfig-NailedGroupThe group index to which this link belongs torw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.11 |
ds1AtmNetworkProfile-LineConfig-LoopbackLoopback mode.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.12 |
ds1AtmNetworkProfile-LineConfig-ClockSourcerw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.13 |
ds1AtmNetworkProfile-LineConfig-ClockPriorityClock priority assigned to the T1 line. Used to select particular lines as clock source.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.14 |
ds1AtmNetworkProfile-LineConfig-oFDLWho's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.15 |
ds1AtmNetworkProfile-LineConfig-FrontEndTypeThe front end type of the transceiver.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.16 |
ds1AtmNetworkProfile-LineConfig-PcmModeNumber of active channels: in PCM highwayrw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.18 |
ds1AtmNetworkProfile-LineConfig-CosetEnabledSelecting yes signifies that the ATM Forum polynomial (coset polynomial) be added to HEC before the HEC verification of a received cell. In the transmit direction, this selection enables generation of a HEC with the coset polynomial value. Selecting no signifies that the ATM Forum polynomial (coset polynomial) *not* be added to HEC before HEC verification of a received cell. In the transmit direction, selecting no enables generation of a HEC without the coset polynomial value.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.19 |
ds1AtmNetworkProfile-LineConfig-ScramblingEnabledSelecting 'yes' enables the descrambling of received cells on the link. The payload of transmitted cells is scrambled. Selecting 'no' disables the descrambling of received cells on the link. The payload of transmitted cells is not scrambled.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.20 |
ds1AtmNetworkProfile-LineConfig-HecCorrectionEnabledSelecting 'yes' enables correction of cells received with a single-bit error in the HEC. Selecting 'no' disables correction of cells received with a single-bit error in the HEC.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.21 |
ds1AtmNetworkProfile-LineConfig-VpSwitchingVpiThe Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY. Valid only when the port is in UNI moderw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.22 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-NeTxLidTransmit LID for the linkrw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.23 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-AddLinkCondTimeLink conditioning timeout during link addition/insertion. Time in secondsrw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.24 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-LinkRecoveryTypeType of link recoveryrw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.25 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTypeAuto/Manualrw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.26 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTimeTime after which fault is cleared if fault-clearing-type set to autorw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.27 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-PriorityPriority defined for TRL, automatically select highest priority link to become the TRL (maybe we can deduct this from the t1ClockSource priorityrw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.28 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-AddLinkCondTimeLink conditioning timeout during link addition/insertion. Time in secondsrw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.29 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-LinkRecoveryTypeType of link recoveryrw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.30 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RecLinkCondTimeLink conditioning timeout during link recovery,rw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.31 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RxLidLearningTimeTime to learn RX LID (in ICP cells)rw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.32 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTypeAuto/Manualrw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.33 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTimeTime after which fault is cleared if fault-clearing-type set to autorw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.34 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-InDefectIntTimeTime in milliseconds, if the defect is persistent for this time, the Rx Failed state machine enters the FAILED staterw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.35 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-OutDefectIntTimeTime in milliseconds, if the no defect condition persists for this time, the Rx Failed state machine leaves the FAILED staterw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.36 |
ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-DefectRatioDefect to No Defect ratiorw INTEGER .1.3.6.1.4.1.4253.1.25.1.1.37 |
ds1AtmNetworkProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.38 |
ds1AtmNetworkProfile-LineConfig-LineLengthThe length of the physical line (for short haul lines).rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.39 |
ds1AtmNetworkProfile-LineConfig-LineBuildOutLine buildout value for CSU lines.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.40 |
ds1AtmNetworkProfile-SparingModePort sparing operational mode for this port.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.41 |
ds1AtmNetworkProfile-IgnoreLineupIgnore line up value for this port.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.42 |
ds1AtmNetworkProfile-LineConfig-SendCodeThe type of code to be sent across the DS1 interface.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.43 |
ds1AtmNetworkProfile-LineConfig-StatusChangeTrapEnableWhen set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.rw Enumeration .1.3.6.1.4.1.4253.1.25.1.1.44 |