ASCEND-MIBDEBUG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBDEBUG-MIB.
24
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
mibdebugProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.72 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.72 |
mibdebugProfileTableA list of mibdebugProfile profile entries. SEQUENCE OF MibdebugProfileEntry .1.3.6.1.4.1.4253.1.72.1 |
mibdebugProfileEntryA mibdebugProfile entry containing objects that
maps to the parameters of mibdebugProfile profile. MibdebugProfileEntry .1.3.6.1.4.1.4253.1.72.1.1 |
debugProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.72.1.1.1 |
debugProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.72.1.1.2 |
debugProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.72.1.1.3 |
debugProfile-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.4 |
debugProfile-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.5 |
debugProfile-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.72.1.1.6 |
debugProfile-ActiveSetting this field to Yes enables this profile. Setting this field to No disables this entire profile.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.7 |
debugProfile-EnableCoreDumpCore dump on system failure can be enabled by setting this field to Yes. Core dumps are disabled if this field is No.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.8 |
debugProfile-CoreDumpServerThe name (or IP address) of the host setup to receive our core dumps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.72.1.1.9 |
debugProfile-EnableGdbGDB can be enabled by setting this field to Yes. GDB is disabled if this field is No.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.10 |
debugProfile-GdbHostThe name (or IP address) of the host running GDB.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.72.1.1.11 |
debugProfile-CsTrackingcsTracking can be enabled by setting this field to Yes. csTracking is disabled if this field is No.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.12 |
debugProfile-GenericFieldThis field can be used as a generic bitmask stored in nonvolatile memory and thus preserved over resets and powerdownsrw INTEGER .1.3.6.1.4.1.4253.1.72.1.1.13 |
debugProfile-MinWarningCoreDumpMinimum value for a range of warning numbers that will generate a core dump (a core dump is taken for warnings between the minimum and maximum warning numbers inclusive) if coredumps are enabled. The default value of 0 in the minimum and maximum fields mean that only warnings from 101 to 121 will cause a core dump.rw INTEGER .1.3.6.1.4.1.4253.1.72.1.1.14 |
debugProfile-MaxWarningCoreDumpMaximum value for a range of warning numbers that will generate a core dump (a core dump is taken for warnings between the minimum and maximum warning numbers inclusive) if coredumps are enabled. The default value of 0 in the minimum and maximum fields mean that only warnings from 101 to 121 will cause a core dump.rw INTEGER .1.3.6.1.4.1.4253.1.72.1.1.15 |
debugProfile-CoreDumpLocationCore dumps will go to the specified location if enabled.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.16 |
debugProfile-FlashCoreOverwriteA previous flash dump will be overwritten by a new dump if this field to Yes, but will be preserved if this field is No.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.17 |
debugProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.18 |
debugProfile-CoreDumpRipUpdateRIP updates will be sent accordingly based on the setting here during coredump.rw Enumeration .1.3.6.1.4.1.4253.1.72.1.1.19 |
debugProfile-CoredumpSourceAddressThe coredump source ip address for the shelf card. It is usually set only if the system-ip-address and the coredump server ip address belong to different networks.rw IpAddress .1.3.6.1.4.1.4253.1.72.1.1.20 |