ASCEND-MIBDBA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBDBA-MIB.
55
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
mibdBAProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.71 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.71 |
mibdBAProfileTableA list of mibdBAProfile profile entries. SEQUENCE OF MibdBAProfileEntry .1.3.6.1.4.1.4253.1.71.1 |
mibdBAProfileEntryA mibdBAProfile entry containing objects that
maps to the parameters of mibdBAProfile profile. MibdBAProfileEntry .1.3.6.1.4.1.4253.1.71.1.1 |
dBAProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.71.1.1.1 |
dBAProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.71.1.1.2 |
dBAProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.71.1.1.3 |
dBAProfile-LogicalItem-oro INTEGER .1.3.6.1.4.1.4253.1.71.1.1.4 |
dBAProfile-LogicalAddress-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.5 |
dBAProfile-LogicalAddress-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.6 |
dBAProfile-LogicalAddress-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.7 |
dBAProfile-LogicalAddress-LogicalItemA number that specifies an addressable logical entity within the context of a physical address.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.8 |
dBAProfile-NameDBA Profiles are recognized by their names given them by the user. The name is a standard null terminated ASCII string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.71.1.1.9 |
dBAProfile-PhoneNumberThe number to dial for this call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.71.1.1.10 |
dBAProfile-BillingNumberThe billing number to use which is either a 'calling party number' or a 'billing suffix' that is appended to the end of the phone number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.71.1.1.11 |
dBAProfile-oCallTypesession channel type.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.12 |
dBAProfile-oCallMgmOne of the management type listed above.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.13 |
dBAProfile-oDataSvcThe type of bearer channel capability to set up for each switched call in the session.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.14 |
dBAProfile-Force56TRUE if the data should be treated as 7-bit data even if the switchedCallType would normally imply 8 bit data.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.15 |
dBAProfile-BaseChannelCountWhen the session is initially set up, and if it is a fixed session, the number of channels to be used for the call.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.16 |
dBAProfile-IncrementChannelCountNumber of channels to increment as a block.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.17 |
dBAProfile-DecrementChannelCountNumber of channels to decrement as a block.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.18 |
dBAProfile-oFailActionIf unable to establish a dba session based on the parameters specified, then the action to be taken is specified in the failureAction.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.19 |
dBAProfile-BitInversionRequiredTRUE if the data being transferred from the host should be inverted before being sent to the network, and FALSE otherwise. I think this needs to be supported by the device, but I will check before committing. Also, this affects the network interface too, I think.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.20 |
dBAProfile-Ft1CallerBOOLEAN which is true for Fractional T1 calls when this side is the caller, and FALSE otherwise.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.21 |
dBAProfile-Ft1Timeoutrw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.22 |
dBAProfile-CallByCallIDThe ID for the call-by-call signalling for PRI.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.23 |
dBAProfile-CalledNumberTypeIndication of whether national number, international number, etc. is specified.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.24 |
dBAProfile-UnknownPlanUnknownIf TRUE indicates that UNKNOWN number plan is used in conjunction with unknown number instead of default, ISDN.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.25 |
dBAProfile-LocalPlanIsdnIf TRUE indicates that ISDN number plan is used in conjunction with local number instead of default, PRIVATE.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.26 |
dBAProfile-TransitNumberThe string for use in the 'transit network ie' for PRI calling when going through a LEC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.71.1.1.27 |
dBAProfile-oAutoBERTShould we BERT at session startup and for how long.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.28 |
dBAProfile-TimedCallTRUE if we should pay attention to the following time period parameters. Not used when the call type is dynamic N-by.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.29 |
dBAProfile-FlagIdleTRUE if looking for flag idle, FALSE when looking for mark idle.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.30 |
dBAProfile-oDynAlgThe algorithm to use for determining weighted line utilization.rw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.31 |
dBAProfile-SecondsOfHistoryNumber of seconds to keep history data around for. This number is in the range of 1 through MAX_HISTORY_SECONDS.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.32 |
dBAProfile-AddSecondsOfPersistenceOnce the upper threshold of utilization is passed, the number of seconds it should stay there is defined here.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.33 |
dBAProfile-RemoveSecondsOfPersistenceOnce the lower threshold of utilization is passed, the number of seconds it should stay there is defined here.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.34 |
dBAProfile-NailedUpGroupNailed-up group letter. This is a group or number field as defined in lcdparam.h.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.35 |
dBAProfile-CallPasswordDBA call password authenticated against port's password on receiver side. Ignored if port's password is not defined.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.71.1.1.36 |
dBAProfile-DbaPriNumberingPlanIdPRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.rw INTEGER .1.3.6.1.4.1.4253.1.71.1.1.37 |
dBAProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.71.1.1.38 |
mibdBAProfile-TimerPeriodParametersTableA list of mibdBAProfile__timer_period_parameters profile entries. SEQUENCE OF MibdBAProfile-TimerPeriodParametersEntry .1.3.6.1.4.1.4253.1.71.2 |
mibdBAProfile-TimerPeriodParametersEntryA mibdBAProfile__timer_period_parameters entry containing objects that
maps to the parameters of mibdBAProfile__timer_period_parameters profile. MibdBAProfile-TimerPeriodParametersEntry .1.3.6.1.4.1.4253.1.71.2.1 |
dBAProfile-TimerPeriodParameters-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.71.2.1.1 |
dBAProfile-TimerPeriodParameters-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.71.2.1.2 |
dBAProfile-TimerPeriodParameters-Item-oro INTEGER .1.3.6.1.4.1.4253.1.71.2.1.3 |
dBAProfile-TimerPeriodParameters-LogicalItem-oro INTEGER .1.3.6.1.4.1.4253.1.71.2.1.4 |
dBAProfile-TimerPeriodParameters-Index-oro INTEGER .1.3.6.1.4.1.4253.1.71.2.1.5 |
dBAProfile-TimerPeriodParameters-oActivLike the other sub-structures above, the number of time-periods actually used is variable. Therefore, this is an indication within each structure of usage.rw Enumeration .1.3.6.1.4.1.4253.1.71.2.1.6 |
dBAProfile-TimerPeriodParameters-StartingTimeEach time period has a starting time, and an ending time (which is implicit by the next starting time specified in another structure). The starting time is specified internally as the number of seconds after midnight, where midnight itself has a value of zero.rw INTEGER .1.3.6.1.4.1.4253.1.71.2.1.7 |
dBAProfile-TimerPeriodParameters-MinimumChannelCountThe smallest number of channels to use during this time period.rw INTEGER .1.3.6.1.4.1.4253.1.71.2.1.8 |
dBAProfile-TimerPeriodParameters-MaximumChannelCountThe maximum number of channels to use during this time period.rw INTEGER .1.3.6.1.4.1.4253.1.71.2.1.9 |
dBAProfile-TimerPeriodParameters-TargetUtilizationThe percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics.rw INTEGER .1.3.6.1.4.1.4253.1.71.2.1.10 |
dBAProfile-TimerPeriodParameters-X25chanTargetUtilizationThe percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics.rw INTEGER .1.3.6.1.4.1.4253.1.71.2.1.11 |