ASCEND-MIBCLTM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBCLTM-MIB.
51
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
mibcltmCmd OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.66 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.66 |
mibcltmCmdTableA list of mibcltmCmd profile entries. SEQUENCE OF MibcltmCmdEntry .1.3.6.1.4.1.4253.1.66.1 |
mibcltmCmdEntryA mibcltmCmd entry containing objects that
maps to the parameters of mibcltmCmd profile. MibcltmCmdEntry .1.3.6.1.4.1.4253.1.66.1.1 |
cltmCmd-Index-oro INTEGER .1.3.6.1.4.1.4253.1.66.1.1.1 |
cltmCmd-CltmSlotIdentify the CLTM slot within the system.ro Enumeration .1.3.6.1.4.1.4253.1.66.1.1.2 |
cltmCmd-TestTimeStampValue of the sysUpTime when the last test command was issued. This parameter is cleared when any of the test parameters are changed.ro INTEGER .1.3.6.1.4.1.4253.1.66.1.1.3 |
cltmCmd-TestSequenceSequence of the last issued test command.ro INTEGER .1.3.6.1.4.1.4253.1.66.1.1.4 |
cltmCmd-TestOperationThe current operation that is active on the CLT Module. Defaultls to 'none'. Set to 'none' to stop the test procedure.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.5 |
cltmCmd-DmmTypeDMM Measurement Type.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.6 |
cltmCmd-DmmLeadDMM Measurement Leads.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.7 |
cltmCmd-BackgroundNoiseFilterLine Filter Type for Background Noise Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.8 |
cltmCmd-BackgroundNoiseTerminationLine Termination Type for Background Noise Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.9 |
cltmCmd-LoopResistanceUnitMeasurement System for Loop Resistance Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.10 |
cltmCmd-LoopResistanceTempLine Temperature for Loop Resistance Test. Assigned in degree celsius/fahrenheit.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.11 |
cltmCmd-ImpulseNoiseStartThreshThreshold for Impulse Noise Test. The Range is 50-100 dBrm.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.12 |
cltmCmd-ImpulseNoiseStartDeltaDelta Value for Impulse Noise Test. The delta range is 2-6 dBrw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.13 |
cltmCmd-ImpulseNoiseStartMaxCountMax Count for Impulse Noise Test. The range of the value is 1-1999.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.14 |
cltmCmd-ImpulseNoiseStartDeadTimeDead Time Value for Impulse Noise Start Test. The value is assigned in 0.1 ms increments.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.15 |
cltmCmd-ImpulseNoiseStartTimerTimer values for Impulse Noise Start Test. The value is assigned in 1 minute increment.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.16 |
cltmCmd-CalibrationTypeCalibration Typerw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.17 |
cltmCmd-ToneSendFreqTone Send Frequency in KHz.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.18 |
cltmCmd-ToneSendLevelTone Send Level in dBm.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.19 |
cltmCmd-ToneSendPeriodAmount of time a tone is sent (1-20 Minutes).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.20 |
cltmCmd-TdrUnitMeasurement System for TDR Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.21 |
cltmCmd-TdrGaugeTDR gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.22 |
cltmCmd-TdrVpTDR VP as percentage of the speed of light.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.23 |
cltmCmd-TdrAvgNumber of trials to get the avarage.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.24 |
cltmCmd-TdrGetTypeTDR Test Range Measurement Type. If set to automatic cltmCmdTdrStartLen and cltmCmdTdrMeasureLen do not need to be set.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.25 |
cltmCmd-TdrStartDistanceTDR Start Length for MANUAL mode, the value is given in feet (15..20000) for the English system and cm (460..609750) for the metric system.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.26 |
cltmCmd-TdrMeasurementLengthTDR Measurement Length for MANUAL mode, the value is given in feet (300..20000) for the English system and cm (9150..609750) for the metric system.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.27 |
cltmCmd-DmmdcdPeriodAmount of time measurement is made (0,1-5 100ms;0=MAX).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.28 |
cltmCmd-DmmdcdVoltageTest voltage to be used (-230 to 230 Volts).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.29 |
cltmCmd-DmmdcdImpedanceOutput Impedance to be used (10 to 1000 Kohms).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.30 |
cltmCmd-DmmcapPeriodAmount of time measurement is made (0,1-5 100ms;0=MAX).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.31 |
cltmCmd-DmmallTypeDMM Measurement Type.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.32 |
cltmCmd-DmmallPeriodAmount of time measurement is made (0,1-5 100ms;0=MAX).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.33 |
cltmCmd-DmmallInputImpInput Impedance (100, 1000 Kohm).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.34 |
cltmCmd-CtoneTypeControl tone, type of DSL service (ADSL, GLITE).rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.35 |
cltmCmd-CtoneToneControl tone, type of Tone (QUIET, RESTORE).rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.36 |
cltmCmd-TtoneLeadtrace tone, Measurement Leads.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.37 |
cltmCmd-TtoneLeveltrace tone, Tone Send Level in dBm.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.38 |
cltmCmd-TtonePeriodtrace tone, Amount of time a tone is sent (1-20 Minutes).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.39 |
cltmCmd-BtapStartLengthMeasurement start length (15 - 20000 ft. or 5 - 6097 meter).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.40 |
cltmCmd-BtapMeasureLengthMeasurement length (100 - 20000 ft. or 32 - 6097 meter).rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.41 |
cltmCmd-Action-orw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.42 |
cltmCmd-FcllocUnitMeasurement System for FCLLOC Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.43 |
cltmCmd-FcllocGaugeFCLLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.44 |
cltmCmd-ShortlocUnitMeasurement System for SHORTLOC Test.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.45 |
cltmCmd-ShortlocGaugeSHORTLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.rw INTEGER .1.3.6.1.4.1.4253.1.66.1.1.46 |
cltmCmd-ShortlocTypeSHORTLOC test type.rw Enumeration .1.3.6.1.4.1.4253.1.66.1.1.47 |