ASCEND-MIBATMQOS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBATMQOS-MIB.
22
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
mibatmQosProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.21 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.21 |
mibatmQosProfileTableA list of mibatmQosProfile profile entries. SEQUENCE OF MibatmQosProfileEntry .1.3.6.1.4.1.4253.1.21.1 |
mibatmQosProfileEntryA mibatmQosProfile entry containing objects that
maps to the parameters of mibatmQosProfile profile. MibatmQosProfileEntry .1.3.6.1.4.1.4253.1.21.1.1 |
atmQosProfile-ContractNameThe name of the Quality of Service (QoS) contract.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.21.1.1.1 |
atmQosProfile-TrafficDescriptorIndexTraffic descriptor index.ro INTEGER .1.3.6.1.4.1.4253.1.21.1.1.2 |
atmQosProfile-TrafficDescriptorTypeThe Traffic Descriptor type.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.3 |
atmQosProfile-AtmServiceCategoryThe ATM Service Category Type. In 7.11.x releases this field was called qos-class.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.4 |
atmQosProfile-PeakRateKbitsPerSecThe Peak Cell Rate (PCR) expressed in Kbits per second ( Peak Bandwidth in KBits/sec )rw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.6 |
atmQosProfile-PeakCellRateCellsPerSecThe Peak Cell Rate (PCR) expressed in cells per secondrw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.7 |
atmQosProfile-SustainableRateKbitsPerSecThe sustainable cell rate (SCR) expressed in Kbits per second ( Sustainable Bandwidth in Kbits/sec )rw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.9 |
atmQosProfile-SustainableCellRateCellsPerSecThe sustainable cell rate (SCR) expressed in cells per secondrw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.10 |
atmQosProfile-IgnoreCellDelayVariationToleranceIgnore cell-delay-variation-tolerance parameter. When it is set to yes, cell-delay-variation-tolerance parameter is ignored, and an internal parameter is used to tolerate bursty CPE that does not have traffic shaping capability.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.11 |
atmQosProfile-CellDelayVariationToleranceCell delay variation tolerance is expressed in microseconds. It is ignored when ignore-cell-delay-variation-tolerance is yes.rw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.12 |
atmQosProfile-IgnoreMaxBurstSizeIgnore max-burst-size parameter. When it is set to yes, max-burst-size parameter is ignored, and an internal parameter is used to tolerate bursty CPE that does not have traffic shaping capability.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.13 |
atmQosProfile-MaxBurstSizeMaximum burst size determines the maximum number of cells that can be transmitted at the peak cell rate before they become candidates for discard or marking. It is ignored when ignore-max-burst-size is yes.rw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.14 |
atmQosProfile-AalTypeATM Adaptation Layer typerw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.16 |
atmQosProfile-EarlyPacketDiscardApplies to egress AAL5 packets. If the first cell in a packet can not be queued then that cell and all the remaining cells in that packet are not queued.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.17 |
atmQosProfile-PartialPacketDiscardApplies to ingress AAL5 packets. If non-conforming cell is discarded then the remaining cells in the packet (except the last cell) are also discarded.rw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.18 |
atmQosProfile-TagOrDiscardThe non-conforming CLP=0 SCR cell should be tagged or discardedrw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.19 |
atmQosProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.21.1.1.20 |
atmQosProfile-SubChannelFor DSL technologies that support multiple sub-channels on one line, when the multiple sub-channels are indeed used at same time, this parameter indicates which sub-channel will be used for this QOS profile. When only one sub-channel is used this parameter has no effect... EXAMPLE: in DMT - when the latency is set to BOTH, sub-channel #1 is the FAST channel ( typically useful for voice traffic - voice over ATM or Packet ) while sub-channel #2 is the INTERLEAVE channel ( typically useful for data traffic ).rw INTEGER .1.3.6.1.4.1.4253.1.21.1.1.21 |