ASCEND-MIBATMPORT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBATMPORT-MIB.
37
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
mibatmIntfConfProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.51 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.51 |
mibatmIntfConfProfileTableA list of mibatmIntfConfProfile profile entries. SEQUENCE OF MibatmIntfConfProfileEntry .1.3.6.1.4.1.4253.1.51.1 |
mibatmIntfConfProfileEntryA mibatmIntfConfProfile entry containing objects that
maps to the parameters of mibatmIntfConfProfile profile. MibatmIntfConfProfileEntry .1.3.6.1.4.1.4253.1.51.1.1 |
atmIntfConfProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.1 |
atmIntfConfProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.2 |
atmIntfConfProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.3 |
atmIntfConfProfile-LogicalItem-oro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.4 |
atmIntfConfProfile-Address-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.5 |
atmIntfConfProfile-Address-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.6 |
atmIntfConfProfile-Address-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.7 |
atmIntfConfProfile-Address-LogicalItemA number that specifies an addressable logical entity within the context of a physical address.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.8 |
atmIntfConfProfile-BaseConfig-MaxVpcsThe maximum number of VPCs (PVPCs/SVPCs) supported at this ATM interface.ro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.9 |
atmIntfConfProfile-BaseConfig-MaxVccsThe maximum number of VCCs (PVCCs/SVCCs) supported at this ATM interface.ro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.10 |
atmIntfConfProfile-BaseConfig-MaxActiveVpiBitsThe maximum number of active VPI bits configured for use at this ATM interface.ro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.11 |
atmIntfConfProfile-BaseConfig-MaxActiveVciBitsThe maximum number of active VCI bits configured for use at this ATM interface.ro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.12 |
atmIntfConfProfile-BaseConfig-IlmiVpiThe VPI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this interface.ro INTEGER .1.3.6.1.4.1.4253.1.51.1.1.13 |
atmIntfConfProfile-BaseConfig-IlmiVciThe VCI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this interface.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.14 |
atmIntfConfProfile-BaseConfig-NeighborIpAddressThe IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.rw IpAddress .1.3.6.1.4.1.4253.1.51.1.1.15 |
atmIntfConfProfile-BaseConfig-NeighborNameThe textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.51.1.1.16 |
atmIntfConfProfile-BaseConfig-SubscAtmAddressThe identifier assigned by a service provider to the network side of public network UNI. If this interface has no assigned service provider address, then atmInterfaceSubscrAddress is an octet string of zero length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.51.1.1.17 |
atmIntfConfProfile-ExtensionConfig-ConfigTypeThe type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not allowed. Default value: autoConfig.rw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.18 |
atmIntfConfProfile-ExtensionConfig-ConfigSideThe configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfConfigType is set to `autoConfig',`atmfPnni1Dot0', or `atmfBici2Dot0'.rw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.19 |
atmIntfConfProfile-ExtensionConfig-IlmiAdminStatusFollowing ILMI components will be enabled on this port only if ilmi-admin-status is set to YES - ilmiAddressRegistration, - ilmiConnectivity, - ilmiPvcPvpMgmt, - ilmiSigVccParamNegotiationrw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.20 |
atmIntfConfProfile-ExtensionConfig-ConnEstabIntervalThe amount of time S (in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.21 |
atmIntfConfProfile-ExtensionConfig-LossDetectIntervalThe amount of time T ( in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.22 |
atmIntfConfProfile-ExtensionConfig-PollInactFactorThe number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.23 |
atmIntfConfProfile-ExtensionConfig-DeviceTypeSpecifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type.rw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.24 |
atmIntfConfProfile-ExtensionConfig-MaxSwitchedVpcVpiThe maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.25 |
atmIntfConfProfile-ExtensionConfig-MaxSwitchedVccVpiThe maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.26 |
atmIntfConfProfile-ExtensionConfig-MinSwitchedVccVciThe minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.27 |
atmIntfConfProfile-ExtensionConfig-SigVccRxQosNameThe signalling VCC QOS parameters for the receive direction.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.51.1.1.28 |
atmIntfConfProfile-ExtensionConfig-SigVccTxQosNameThe signalling VCC QOS parameters for the transmit direction.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.51.1.1.29 |
atmIntfConfProfile-ExtensionConfig-PvcFailureTrapEnabledAllows the generation of traps in response to PVCL or PVPL failures on this interface. Default = FALSErw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.30 |
atmIntfConfProfile-ExtensionConfig-PvcFailureIntvlThe minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface, Default = 30 seconds.rw INTEGER .1.3.6.1.4.1.4253.1.51.1.1.31 |
atmIntfConfProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.32 |
atmIntfConfProfile-ExtensionConfig-IlmiConnectivityILMI Connectivity enabled on this port if set to YESrw Enumeration .1.3.6.1.4.1.4253.1.51.1.1.33 |