ASCEND-MIBATMP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBATMP-MIB.
17
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
mibatmpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.42 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.42 |
mibatmpProfileTableA list of mibatmpProfile profile entries. SEQUENCE OF MibatmpProfileEntry .1.3.6.1.4.1.4253.1.42.1 |
mibatmpProfileEntryA mibatmpProfile entry containing objects that
maps to the parameters of mibatmpProfile profile. MibatmpProfileEntry .1.3.6.1.4.1.4253.1.42.1.1 |
atmpProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.42.1.1.1 |
atmpProfile-AgentModeThe valid modes for this ATMP agent.rw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.2 |
atmpProfile-AgentTypeThe type of Home Agent.rw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.3 |
atmpProfile-UdpPortUDP port number to use locally.rw INTEGER .1.3.6.1.4.1.4253.1.42.1.1.4 |
atmpProfile-HomeAgentPasswordThe password required to access this home agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.42.1.1.5 |
atmpProfile-AtmpSapReplyWhether an ATMP Home Agent should reply to IPX SAP Nearest Server queries from the Mobile Client.rw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.6 |
atmpProfile-RetryTimeoutThe number of seconds between retries to establish a tunnel.rw INTEGER .1.3.6.1.4.1.4253.1.42.1.1.7 |
atmpProfile-RetryLimitThe maximum number of failed attempts to establish a tunnel before switching to the alternate home agent.rw INTEGER .1.3.6.1.4.1.4253.1.42.1.1.8 |
atmpProfile-IdleTimerThe number of minutes of no activity before an ATMP Home Agent will drop a tunnel. The value 0 disables the idle timer.rw INTEGER .1.3.6.1.4.1.4253.1.42.1.1.9 |
atmpProfile-MtuLimitThe maximum IP packet size that can be transmitted to a remote agent without performing pre-fragmentation. The value 0 disables this feature. If enabled, the smallest size the system will use is 68, even if a smaller size is specified. This is to comply with the minimum IP packet size requirement per RFC 791.rw INTEGER .1.3.6.1.4.1.4253.1.42.1.1.10 |
atmpProfile-ForceFragmentationWhen set to NO, an ICMP message will be sent if a frame needs fragmentation and the DF bit is set. This is the standard behavior. When set to YES, it forces pre-fragmentation of large IP frames before they are sent to the remote agent, even if the frame has the DF bit set. This behavior is not standard and prevents MTU discovery mechanisms.rw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.11 |
atmpProfile-AtmpSnmpTrapWhen set to No, do not send ATMP SNMP traps. If Yes, send traps. The default is No.rw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.12 |
atmpProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.42.1.1.13 |