ASCEND-MIBATMIF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBATMIF-MIB.
57
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
mibatmInterfaceProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.40 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.40 |
mibatmInterfaceProfileTableA list of mibatmInterfaceProfile profile entries. SEQUENCE OF MibatmInterfaceProfileEntry .1.3.6.1.4.1.4253.1.40.1 |
mibatmInterfaceProfileEntryA mibatmInterfaceProfile entry containing objects that
maps to the parameters of mibatmInterfaceProfile profile. MibatmInterfaceProfileEntry .1.3.6.1.4.1.4253.1.40.1.1 |
atmInterfaceProfile-Shelf-oro INTEGER .1.3.6.1.4.1.4253.1.40.1.1.1 |
atmInterfaceProfile-Slot-oro INTEGER .1.3.6.1.4.1.4253.1.40.1.1.2 |
atmInterfaceProfile-Item-oro INTEGER .1.3.6.1.4.1.4253.1.40.1.1.3 |
atmInterfaceProfile-LogicalItem-oro INTEGER .1.3.6.1.4.1.4253.1.40.1.1.4 |
atmInterfaceProfile-InterfaceAddress-PhysicalAddress-ShelfThe number of the shelf that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.5 |
atmInterfaceProfile-InterfaceAddress-PhysicalAddress-SlotThe number of the slot that the addressed physical device resides on.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.6 |
atmInterfaceProfile-InterfaceAddress-PhysicalAddress-ItemNumberA number that specifies an addressable entity within the context of shelf and slot.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.7 |
atmInterfaceProfile-InterfaceAddress-LogicalItemA number that specifies an addressable logical entity within the context of a physical address.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.8 |
atmInterfaceProfile-NameName of ATM Interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.9 |
atmInterfaceProfile-SvcOptions-EnabledSVC signalling (Q.93b) is enabled on this link.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.10 |
atmInterfaceProfile-SvcOptions-AtmProtocolATM protocol on this link.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.11 |
atmInterfaceProfile-SvcOptions-AtmAddress-NumberingPlanNumbering plan for an SVC addressrw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.12 |
atmInterfaceProfile-SvcOptions-AtmAddress-E164NativeAddressAn SVC address in a native E.164 format.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.13 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-FormatAn AESA address format used to define this SVC address.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.14 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-AfiAn Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.15 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-IdiAn Initial Domain Identifier (IDI) portion of the AESA address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.16 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-HoDspA High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.17 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-EsiAn End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.18 |
atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-SelA selector (SEL) field that may be used by the end system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.40.1.1.19 |
atmInterfaceProfile-SvcOptions-InsertCallingPartyAddrInsert ATM address of this interface in calling party address IE during call setup.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.20 |
atmInterfaceProfile-SvcOptions-Q93bOptions-MaxRestartMaximum number of unacknowledged tx RESTART.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.21 |
atmInterfaceProfile-SvcOptions-Q93bOptions-MaxStatenqMaximum number of unacknowledged tx STATUS ENQ.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.22 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T301MsTimer (in msec) for alerting supervision function. This timer is started on receipt of ALERT in Call received/delivered state and stopped when CONNECT is received.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.23 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T303MsTimer (in msec) for a response after SETUP is sent. This timer is stopped when the CONNECT, CALL PROCEEDING, or RELEASE COMPLETE is received.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.24 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T306MsTimer (in msec) for a RELEASE_COMPLETE to be received after a release has been sent.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.25 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T308MsTimer (in msec) for a response after RELEASE is sent. This is a release indication timer. This timer is started when the RELEASE message is sent and normally is stopped when the RELEASE or RELEASE COMPLETE is received.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.26 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T309MsTimer (in msec) for Q.SAAL to reconnect. After this time, calls are dropped. When set to 0, a default value based on an ATM signaling protocol will be used.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.27 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T310MsTimer (in msec) for a response after SETUP is received. Also called the CALL PROCEEDING timer.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.28 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T313MsTimer (in msec) for a response after CONNECT is sent. Also called the connect request timer. It is started when the CONNECT is sent and stopped when the CONNECT ACKNOWLEDGE is recieved.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.29 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T316MsTimer (in msec) for a response after RESTART is sent. Also called the restart request timer. It is started when the RESTART is sent and stopped when the RESTART ACKNOWLEDGE is recieved.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.30 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T317MsTimer (in msec) for internal clearing of call references. This timer is started as a result of a restart and cleared when all the internal call references are cleared. Should be less than the the likely value of T316 of the peer.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.31 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T322MsTimer (in msec) for a response after STATUS ENQ is sent.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.32 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T331MsTimer (in msec) for internal clearing of call references.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.33 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T333MsTimer (in msec) for internal clearing of call references.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.34 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T397MsTimer (in msec) for internal clearing of call references.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.35 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T398MsTimer (in msec) for receipt of a response to a DROP PARTY that was sent.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.36 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T399MsTimer (in msec) for receipt of a response to an ADD PARTY that was sent.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.37 |
atmInterfaceProfile-SvcOptions-Q93bOptions-SaalRetryMsTimer value for retrying AAL_ESTABLISH messages.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.38 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T303NumRetiesNumber of times SETUP could be resent in case of T303 timer expiry.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.39 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T308NumRetriesNumber of times RELEASE could be sent in case of T308 timer expiry.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.40 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T316NumRetriesNumber of times RESTART could be sent in case RESTART ACK is not received withinn T316 timer expiry.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.41 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T322NumRetriesNumber of times STAT ENQ could be sent before a response is received within the T322 timer expiry.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.42 |
atmInterfaceProfile-SvcOptions-Q93bOptions-T331NumRetriesrw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.43 |
atmInterfaceProfile-SvcOptions-Q93bOptions-AssignVpiVciIn the case of UNI4.0 and PNNI this parameter specifies who assigns the VPI/VCI. TRUE will allow the local stack and FALSE will let the partner stack to assign.rw Enumeration .1.3.6.1.4.1.4253.1.40.1.1.44 |
atmInterfaceProfile-SvcOptions-QsaalOptions-WindowSizeQ.SAAL window sizerw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.45 |
atmInterfaceProfile-SvcOptions-QsaalOptions-MaxCcMaximum number of control PDU (BGN, END, RESYNC) retransmissions.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.46 |
atmInterfaceProfile-SvcOptions-QsaalOptions-MaxPdMaximum number of Sequenced data PDU's between poll.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.47 |
atmInterfaceProfile-SvcOptions-QsaalOptions-MaxStatMaximum length of STAT PDU.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.48 |
atmInterfaceProfile-SvcOptions-QsaalOptions-TccMsRetry time (in msec) for control PDU's(BGN, END, RESYNC).rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.49 |
atmInterfaceProfile-SvcOptions-QsaalOptions-TpollMsPoll sent (in msec) when active. When set to 0, a default value based on an ATM signaling protocol will be used.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.50 |
atmInterfaceProfile-SvcOptions-QsaalOptions-TkeepaliveMsPoll sent (in msec) when in transient state. When set to 0, a default value based on an ATM signaling protocol will be used.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.51 |
atmInterfaceProfile-SvcOptions-QsaalOptions-TnoresponseMsSTAT received at least this period(in msec). When set to 0, a default value based on an ATM signaling protocol will be used.rw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.52 |
atmInterfaceProfile-SvcOptions-QsaalOptions-TidleMsPoll sent (in msec) when idle
::= { mibatmInterfaceProfileEntry 53 }
atmInterfaceProfile-SvcOptions-QsaalOptions-PollAfterRetransmission OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw INTEGER .1.3.6.1.4.1.4253.1.40.1.1.57 |