ASCEND-MIBANSWER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-MIBANSWER-MIB.
93
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
mibanswerProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4253.1.3 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4253.1.3 |
mibanswerProfileTableA list of mibanswerProfile profile entries. SEQUENCE OF MibanswerProfileEntry .1.3.6.1.4.1.4253.1.3.1 |
mibanswerProfileEntryA mibanswerProfile entry containing objects that
maps to the parameters of mibanswerProfile profile. MibanswerProfileEntry .1.3.6.1.4.1.4253.1.3.1.1 |
answerProfile-Index-oro INTEGER .1.3.6.1.4.1.4253.1.3.1.1.1 |
answerProfile-UseAnswerForAllDefaultsWhen set to Yes, this profile will provide the default values for fields when building profiles. When set to No the factory profile will be used instead.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.2 |
answerProfile-Force56kbpsIf yes then inbound 64 kbps calls are connected at 56 kbps.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.3 |
answerProfile-ProfilesRequiredUnused when incoming authentication is used. When authentication is not used a No value in this field indicates that we will create a temporary profile for a user on incoming calls. A Yes value indicates that we must find an existing profile (by matching the caller's IP address). This provided NO security.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.4 |
answerProfile-ClidAuthModeSpecifies how calling line identification (CLID) will be used for incoming call authentication.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.5 |
answerProfile-PppAnswer-EnabledSet to Yes to enable incoming PPP calls. This includes the PPP variants, MP and MPP.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.6 |
answerProfile-PppAnswer-ReceiveAuthModeThe type of PPP authentication to use for incoming calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.7 |
answerProfile-PppAnswer-DisconnectOnAuthTimeout???.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.8 |
answerProfile-PppAnswer-BridgingGroupThe default bridging group. Interfaces with the same bridging group can bridge to each other. Set to 0 to disable bridging.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.9 |
answerProfile-PppAnswer-LinkCompressionThe default type of link compression to use for PPP, MP, and MPP calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.10 |
answerProfile-PppAnswer-MruThe Maximum Receive Unit, i.e. the largest frame we will accept.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.11 |
answerProfile-PppAnswer-LqmLink Quality Monitoring. Set to Yes to enable the PPP LQM protocol.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.12 |
answerProfile-PppAnswer-LqmMinimumPeriodThe minimum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.13 |
answerProfile-PppAnswer-LqmMaximumPeriodThe maximum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.14 |
answerProfile-MpAnswer-EnabledSet to Yes to enable incoming MP calls. This includes the MP variant, MPP.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.15 |
answerProfile-MpAnswer-MinimumChannelsThe default value for the minimum number of channels in a multi-channel call.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.16 |
answerProfile-MpAnswer-MaximumChannelsThe default value for the maximum number of channels in a multi-channel call.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.17 |
answerProfile-MpAnswer-BacpEnableEnable Bandwidth Allocation Control Protocol (BACP).rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.18 |
answerProfile-MppAnswer-EnabledSet to Yes to enable incoming MPP calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.19 |
answerProfile-MppAnswer-DynamicAlgorithmThe algorithm to use to calculate the average link utilization. Bandwidth changes are performed on the average utilization, not current utilization.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.20 |
answerProfile-MppAnswer-BandwidthMonitorDirectionThe direction to monitor link utilization. A unit can monitor transmit, transmit and receive, or turn off monitoring entirely.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.21 |
answerProfile-MppAnswer-IncrementChannelCountNumber of channels to increment as a block.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.22 |
answerProfile-MppAnswer-DecrementChannelCountNumber of channels to decrement as a block.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.23 |
answerProfile-MppAnswer-SecondsHistoryThe number of seconds of history that link utilization is averaged over to make bandwidth changes.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.24 |
answerProfile-MppAnswer-AddPersistenceThe number of seconds of that the average line utilization must exceed the target utilization before bandwidth will be added.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.25 |
answerProfile-MppAnswer-SubPersistenceThe number of seconds of that the average line utilization must fall below the target utilization before bandwidth will be reduced. Bandwidth will not be reduced if the reduced bandwidth would exceed the target utilization.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.26 |
answerProfile-MppAnswer-TargetUtilizationThe default value for the target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this value.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.27 |
answerProfile-FrAnswer-EnabledSet to yes to enable incoming FR calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.28 |
answerProfile-TcpClearAnswer-EnabledIf enabled, incoming calls that match a local profile with a call management type of tcp-raw will automatically be connected via a raw TCP pipe to the host named in the local profile. If disabled, logins that match a tcp-raw profile will be rejected.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.29 |
answerProfile-AraAnswer-EnabledSet to yes to enable incoming ARA calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.30 |
answerProfile-V120Answer-EnabledSet to yes to enable incoming V120 calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.31 |
answerProfile-V120Answer-FrameLengthThe default frame length to use for incoming V.120 connections.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.32 |
answerProfile-X25Answer-EnabledIf enabled, incoming calls that match a local profile with a call management type of x25 will be accepted.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.33 |
answerProfile-X25Answer-X25ProfileName of the x25 profile that this profile is associated with.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.34 |
answerProfile-X25Answer-X3ProfileX.3 profile parameter indexrw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.35 |
answerProfile-X25Answer-MaxCallsMax number of unsuccessful callsrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.36 |
answerProfile-X25Answer-VcTimerEnablePAD VCE enable flagrw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.37 |
answerProfile-X25Answer-AutoCallX121AddressX.121 address to auto-call upon session startup.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.38 |
answerProfile-X25Answer-ReverseChargeReverse charge requestrw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.39 |
answerProfile-X25Answer-X3CustomProfCustom profile enter a string for a custom X.3 profile if x3Prof says custom.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.40 |
answerProfile-EuAnswer-EurawEnabledEnable/disable the EUNET raw protocol.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.45 |
answerProfile-EuAnswer-EuuiEnabledEnable/disable the EUNET UI protocol.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.46 |
answerProfile-EuAnswer-DceAddrThe address of the DCE side of the link when the EUNET UI protocol is used.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.47 |
answerProfile-EuAnswer-DteAddrThe address of the DTE side of the link when the EUNET UI protocol is used.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.48 |
answerProfile-EuAnswer-MruThe Maximum Receive Unit, i.e. the largest frame we will accept when the EUNET UI protocol is used.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.49 |
answerProfile-IpAnswer-EnabledSet to yes to enable IP routing on incoming calls using encapsulation protocols that support IP routing.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.50 |
answerProfile-IpAnswer-VjHeaderPredictionSet to yes to enable Van Jacobson IP header prediction to be negotiated on incoming calls using encapsulation protocols that support this feature.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.51 |
answerProfile-IpAnswer-AssignAddressSet to yes if this unit is configured with one or more pools of IP addresses that will be used as a source of addresses to assign to incoming callers.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.52 |
answerProfile-IpAnswer-RoutingMetricThe default metric assigned to routes created for incoming calls.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.53 |
answerProfile-IpxAnswer-EnabledSet to Yes to enable incoming IPX calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.54 |
answerProfile-IpxAnswer-PeerModeEnable/disable full routing between peer or use the pool to assign a network number.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.55 |
answerProfile-SessionInfo-CallFilterThe name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is used for connection profile defaults, if a call should be placed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.56 |
answerProfile-SessionInfo-DataFilterThe name of the filter used to determine if packets should be forwarded or dropped.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.57 |
answerProfile-SessionInfo-FilterPersistenceDetermines if filters should persist between calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.58 |
answerProfile-SessionInfo-IdleTimerThe number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.59 |
answerProfile-SessionInfo-TsIdleModeThe method used to determine when the terminal server idle session timer is reset.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.60 |
answerProfile-SessionInfo-TsIdleTimerThe number of seconds of no activity as defined by the idle mode before a session will be terminated.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.61 |
answerProfile-SessionInfo-MaxCallDurationThe number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.62 |
answerProfile-X75Answer-EnabledSet to yes to enable incoming X75 calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.63 |
answerProfile-X75Answer-KFramesOutstandingNumber of frames outstanding before we require an ack. Defaults to 7.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.64 |
answerProfile-X75Answer-N2RetransmissionsNumber of retransmissions allowed. Defaults to 10.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.65 |
answerProfile-X75Answer-T1RetranTimerNumber of milliseconds between retransmissions. Defaults to 1000.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.66 |
answerProfile-X75Answer-FrameLengthFrame length to use for incoming X.75 connections. Defaults to 1024.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.67 |
answerProfile-FramedOnlyA profile can be restricted to only doing the framed commands (ppp, mpp, slip, and quit) by setting this to YESrw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.68 |
answerProfile-Action-orw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.69 |
answerProfile-PppAnswer-CbcpEnabledEnable Microsoft Callback Control Protocol Negotiation.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.70 |
answerProfile-HdlcNrmAnswer-EnabledSet to yes to enable incoming HDLC-NRM calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.71 |
answerProfile-Visa2Answer-EnabledSet to yes to enable incoming VISA2 calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.72 |
answerProfile-ClidSelectionSelection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.73 |
answerProfile-PppAnswer-IpxHeaderCompressionUse IPX header compression if encapsulation supports it.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.74 |
answerProfile-PppAnswer-MtuThe Maximum Transmit Unit, i.e. the largest frame we will send out.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.75 |
answerProfile-IpAnswer-PrivateRouteProfileRequiredParameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private route profile cannot be found. If set to no, the call will be allowed to complete, even if the private route profile cannot be found.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.76 |
answerProfile-SessionInfo-FilterRequiredIf No, the call will be allowed to come up even if the specified filter was not found either locally, in the cache or in RADIUS. If Yes, then the call will be cleared if the specified filter was not found either locally, in the cache or in RADIUS.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.77 |
answerProfile-AtmAnswer-SvcEnabledSet to yes to enable ATM SVC athentication on incoming calls.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.78 |
answerProfile-PppAnswer-BiDirectionalAuthThis parameter enables the authentication to be done in both directions. It can be used only with the CHAP, MS-CHAP or CACHE-TOKEN authentication.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.79 |
answerProfile-PppAnswer-SubstituteSendNameName send to the far end, if different from the global system name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.80 |
answerProfile-PppAnswer-AuthForAsyncFramedUsersDetermines whether we need to authenticate async framed users.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.81 |
answerProfile-PppAnswer-MaxPapAuthRetryNumber of retries allowed, if PAP authentication fails.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.82 |
answerProfile-IpAnswer-PoolForAsyncFramedUserPool number to be used for dial-in asynchronous PPP framed users with out authentication.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.83 |
answerProfile-CallbackClidPrefixPrefix to prepend to the dial number when callback is performed with the CLID number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4253.1.3.1.1.85 |
answerProfile-PriorityAnswer-PacketClassificationMethod used to classify PPP packets.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.87 |
answerProfile-PriorityAnswer-MaxRtpPacketDelayMaximum delay for RTP packets in milli-seconds. Used for calculating the fragment size for the non-rtp traffic using the same link.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.88 |
answerProfile-PriorityAnswer-MinimumRtpPortMinimum UDP port for prioritizationrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.89 |
answerProfile-PriorityAnswer-MaximumRtpPortMaximum UDP port for prioritizationrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.90 |
answerProfile-PriorityAnswer-NoHighPrioPktDurationThe number of seconds of no high priority packets before disabling IP fragmentation of low priority packets. The value 0 disables checking duration of no high priority packet.rw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.91 |
answerProfile-PppAnswer-MaxPppConfigureRetryNumber of retries allowed, if LCP/NCP failsrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.92 |
answerProfile-PppAnswer-PppRestartTimerInitial LCP/NCP restart timerrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.93 |
answerProfile-PppAnswer-MaxPppRestartTimerMaximum LCP/NCP restart timerrw INTEGER .1.3.6.1.4.1.4253.1.3.1.1.94 |
answerProfile-PriorityAnswer-EnabledEnable priority classification.rw Enumeration .1.3.6.1.4.1.4253.1.3.1.1.95 |