ARRIS-D5-VIDEO-VIF-MIB
The ARRIS-D5-VIDEO-VIF-MIB enables SNMP-based monitoring and management of virtual interface states, traffic statistics, and operational parameters on ARRIS D5 cable modem termination systems (CMTS) or edge routers. It specifically tracks the status, throughput, and error counters for virtual interfaces utilized in video service delivery and broadband aggregation.
Imported Objects
Objects
20 total| Object Name |
|---|
arrisD5UEQamVIFMibThis MIB manages the virtual-interfaces on the ARRIS D5 product MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.14 |
d5UEQamVirtualInterfaceLbTableArris UEQ Proprietry Virtual-Interface Loopback Table SEQUENCE OF D5UEQamVirtualInterfaceLbEntry .1.3.6.1.4.1.4115.1.8.1.14.1 |
d5UEQamVirtualInterfaceLbEntryA row in the d5UEQamVirtualInterfaceLbTable. An entry in this table exists for each loopback configured as a virtual-interface D5UEQamVirtualInterfaceLbEntry .1.3.6.1.4.1.4115.1.8.1.14.1.1 |
d5UEQamVirtualInterfaceLbVifNumbervirtual-interface identifier Unsigned32 .1.3.6.1.4.1.4115.1.8.1.14.1.1.1 |
d5UEQamVirtualInterfaceLbNumbernumber of loopback interface to be used as a virtual-interfacerw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.14.1.1.2 |
d5UEQamVirtualInterfaceLbIpAddressprimary ip address of virtual-interfacerw IpAddress .1.3.6.1.4.1.4115.1.8.1.14.1.1.3 |
d5UEQamVirtualInterfaceLbIpMaskprimary ip subnet mask of virtual-interfacerw IpAddress .1.3.6.1.4.1.4115.1.8.1.14.1.1.4 |
d5UEQamVirtualInterfaceLbIpBCastAddressprimary ip subnet broadcast address of virtual-interfacerw IpAddress .1.3.6.1.4.1.4115.1.8.1.14.1.1.5 |
d5UEQamVirtualInterfaceLbIpDHCPstates if the ip addresses was configured via DHCP or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.14.1.1.6 |
d5UEQamVirtualInterfaceLbManagementAccesscontrols management-access state of virtual-interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.14.1.1.7 |
d5UEQamVirtualInterfaceLbAdminStatecontrols admin state of virtual-interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.14.1.1.8 |
d5UEQamVirtualInterfaceLbIfIndexThe ifIndex value of the virtual-interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.14.1.1.9 |
d5UEQamVirtualInterfaceLbStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.14.1.1.10 |
d5UEQamVirtualInterfacePhyTableArris D5 UEQ Virtual-Interface Table SEQUENCE OF D5UEQamVirtualInterfacePhyEntry .1.3.6.1.4.1.4115.1.8.1.14.2 |
d5UEQamVirtualInterfacePhyEntryA row in the d5UEQamVirtualInterfacePhyTable. An entry in this table exists for each physical port configured as a member of a virtual-interface D5UEQamVirtualInterfacePhyEntry .1.3.6.1.4.1.4115.1.8.1.14.2.1 |
d5UEQamVirtualInterfacePhyNumbervirtual-interface number, virtual-interface must exist before attempting to add/remove a subinterface Unsigned32 .1.3.6.1.4.1.4115.1.8.1.14.2.1.1 |
d5UEQamVirtualInterfacePhyPriorityvirtual-interface priority, 1 indicates highest priority, 6 is the lowest. Order in which physical links will become operational Unsigned32 .1.3.6.1.4.1.4115.1.8.1.14.2.1.2 |
d5UEQamVirtualInterfacePhyIfIndexThe ifIndex value of the subinterface being added to or removed from the virtual-interface, must be primary subinterface of a port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.14.2.1.3 |
d5UEQamVirtualInterfacePhyVlanvlan to be used when the link becomes operational, zero indicates unencapsulatedrw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.14.2.1.4 |
d5UEQamVirtualInterfacePhyStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.14.2.1.5 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.