ARRIS-D5-VIDEO-IP-BUNDLE-MIB
The ARRIS-D5-VIDEO-IP-BUNDLE-MIB provides SNMP-based management and monitoring of IP bundle interfaces and their associated traffic statistics on ARRIS D5 cable modem termination systems. It enables the tracking of bundle operational states, throughput metrics, and error counters to facilitate the diagnosis of video transport and broadband service delivery issues.
Imported Objects
Objects
13 total| Object Name |
|---|
arrisD5UEQamIpBundleMibThis MIB manages the ip-bundles on the ARRIS D5 product MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.16 |
d5UEQamIpBundlePolicyConfigure the ip bundle policy to be revertive or non-revertive.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.16.1 |
d5UEQamIpBundlePolicyRevertiveTimeoutConfigure the ip bundle policy to be revertive timeout interval in seconds. Setting this object to non zero will also turn on the revertive policy. Setting this to a zero value will not turn off revertive policy if on.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.16.2 |
d5UEQamIpBundleRevertToControl for administratively reverting to the backup port from the primary port identified by the ifIndex.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.16.3 |
d5UEQamIpBundleRevertFromControl for administratively reverting from the backup port to the primary port identified by the ifIndex.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.16.4 |
d5UEQamIpBundleTableArris UEQ Proprietry Ip Bundle Table SEQUENCE OF D5UEQamIpBundleEntry .1.3.6.1.4.1.4115.1.8.1.16.5 |
d5UEQamIpBundleEntryA row in the d5UEQamIpBundleTable. An entry in this table exists for each gigabit port that is backed up by another gigabit port D5UEQamIpBundleEntry .1.3.6.1.4.1.4115.1.8.1.16.5.1 |
d5UEQamIpBundlePrimaryPortifIndex of a primary port in the ip bundle Enumeration .1.3.6.1.4.1.4115.1.8.1.16.5.1.1 |
d5UEQamIpBundleBackUpPortifIndex of the backup port in the ip bundlerw Enumeration .1.3.6.1.4.1.4115.1.8.1.16.5.1.2 |
d5UEQamIpBundlePrimaryFailedOverstates if the primary port is currently being backed up by the backup portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.16.5.1.3 |
d5UEQamIpBundlePrimaryLinkUpstates if the primary port's line protocol is currently upro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.16.5.1.4 |
d5UEQamIpBundleBackupLinkUpstates if the primary port's line protocol is currently upro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.16.5.1.5 |
d5UEQamIpBundleStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.16.5.1.6 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.