ARRIS-D5-SFP-MIB
The ARRIS-D5-SFP-MIB module enables SNMP-based monitoring and management of optical transceiver parameters, including temperature, voltage, bias current, and transmit/receive power levels, specifically for Arris D5 series Small Form-factor Pluggable (SFP) modules.
Imported Objects
Objects
12 total| Object Name |
|---|
d5SfpMibThis MIB contains objects related to the Arris D5 SFP modules. MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.13 |
d5SfpTableThis table extends d5SfpTable MIB with extra properties. SEQUENCE OF D5SfpEntry .1.3.6.1.4.1.4115.1.8.1.13.1 |
d5SfpEntryAn entry for a D5 SFP Table. D5SfpEntry .1.3.6.1.4.1.4115.1.8.1.13.1.1 |
d5SfpIndexSfp index.ro INTEGER .1.3.6.1.4.1.4115.1.8.1.13.1.1.1 |
d5SfpPresentThis value will be true if an SFP is present.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.2 |
d5SfpConnectorCode for connector type from SFP MSA Table 3.3.ro Enumeration .1.3.6.1.4.1.4115.1.8.1.13.1.1.3 |
d5SfpComplianceSFP Compliance Code from SFP MSA Table 3.4 Data Addr 6.ro Integer32 .1.3.6.1.4.1.4115.1.8.1.13.1.1.4 |
d5SfpVendorNameName of the SFP vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.5 |
d5SfpProductNameProduct Name of the SFP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.6 |
d5SfpRevisionSFP Revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.7 |
d5SfpSerialNumberThe SFP serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.8 |
d5SfpManufactureDateThe SFP date of manufacturer date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.13.1.1.9 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.