ARRIS-D5-IP-MIB
The ARRIS-D5-IP-MIB enables SNMP-based monitoring and configuration of proprietary IP stack parameters, including interface addressing, routing tables, and DHCP settings, on ARRIS D5 series cable modems and CMTS edge devices.
Imported Objects
Objects
19 total| Object Name |
|---|
arrisD5UEQamIpMibThis MIB manages the proprietary IP configuration of the D5 MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.15 |
arrisD5UEQamIpGroupA collection of objects providing system IP configuration. Unknown .1.3.6.1.4.1.4115.1.8.1.15.1 |
d5IpDefaultRouteSets default route.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4115.1.8.1.15.1.1 |
d5IpGratuitousArpEnabledEnable or Disable the gratuitous arp feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.15.1.2 |
d5IpGratuitousArpPeriodConfigure the frequency of gratuitous arp transmission.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.15.1.3 |
d5IpIgmpCacheExtTableA list of source ips for a given multicast group SEQUENCE OF D5IpIgmpCacheExtEntry .1.3.6.1.4.1.4115.1.8.1.15.1.4 |
d5IpIgmpCacheExtEntryAn entry containing additional information, mainly source ip addresses for an entry in the igmpCacheTable D5IpIgmpCacheExtEntry .1.3.6.1.4.1.4115.1.8.1.15.1.4.1 |
igmpCacheSource1The IP multicast group source addressrw IpAddress .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.1 |
igmpCacheSource1StatusThe current state of the source address, whether the interface is down, video is stremaing, is waiting for a stream or is a candidate in the case of loss of current streamro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.2 |
igmpCacheSource1TypeStates if the source address is statically or dynamically configuredro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.3 |
igmpCacheSource2The IP multicast group source addressrw IpAddress .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.4 |
igmpCacheSource2StatusThe current state of the source address, whether the interface is down, video is stremaing, is waiting for a stream or is a candidate in the case of loss of current streamro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.5 |
igmpCacheSource2TypeStates if the source address is statically or dynamically configuredro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.6 |
igmpCacheSource3The IP multicast group source addressrw IpAddress .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.7 |
igmpCacheSource3StatusThe current state of the source address, whether the interface is down, video is stremaing, is waiting for a stream or is a candidate in the case of loss of current streamro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.8 |
igmpCacheSource3TypeStates if the source address is statically or dynamically configuredro Enumeration .1.3.6.1.4.1.4115.1.8.1.15.1.4.1.9 |
d5IpIgmpInterfaceExtTableA list of additional fields to the v2 igmp mib entry SEQUENCE OF D5IpIgmpInterfaceExtEntry .1.3.6.1.4.1.4115.1.8.1.15.1.5 |
d5IpIgmpInterfaceExtEntryAn entry containing additional information to the v2 igmp mib entry D5IpIgmpInterfaceExtEntry .1.3.6.1.4.1.4115.1.8.1.15.1.5.1 |
igmpInterfaceExtVersion2QuerierTimerThe time remaining until the host assumes that there are no IGMPv2 routers present on the interface. While this is non- zero, the host will reply to all queries with version 1 membership reports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4115.1.8.1.15.1.5.1.1 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.