ARRIS-D5-ENT-SENSOR-THRESH-MIB
The ARRIS-D5-ENT-SENSOR-THRESH-MIB extends the standard ENTITY-SENSOR-MIB to define threshold configuration and alarm reporting for physical environmental sensors, such as temperature and voltage, on ARRIS D5 series cable modem termination systems (CMTS) and edge routers. This module enables network operations to monitor hardware health by specifying trigger limits for sensor data points to generate SNMP traps when environmental conditions exceed defined operational boundaries.
Imported Objects
Objects
13 total| Object Name |
|---|
arrisEntSensorThreshMIBThis is the extension Module to rfc3433 ENTITY-SENSOR-MIB. MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.4 |
entThreshObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.4.1 |
entThreshTableThis table contains one row per physical sensor. Each row contains the set of thresholds maintained for each pyhsical sensor. SEQUENCE OF EntThreshEntry .1.3.6.1.4.1.4115.1.8.1.4.1.1 |
entThreshEntryThe threshold information for a particular physical sensor. An entry in this table describes the upper and lower warning thresholds, as well as the upper and lower fatal thresholds. EntThreshEntry .1.3.6.1.4.1.4115.1.8.1.4.1.1.1 |
entLowerWarnThreshThe lower warning threshold for a physical sensor. When a sensor value goes below this threshold, the system will continue to operate, but the craftperson should evaluate the problem.rw Integer32 .1.3.6.1.4.1.4115.1.8.1.4.1.1.1.1 |
entUpperWarnThreshThe upper warning threshold for a physical sensor. When a sensor value goes above this threshold, the system will continue to operate, but the craftperson should evaluate the problem.rw Integer32 .1.3.6.1.4.1.4115.1.8.1.4.1.1.1.2 |
entLowerFatalThreshThe lower fatal threshold for a physical sensor. When a sensor value goes below this threshold, the system will shutdown.rw Integer32 .1.3.6.1.4.1.4115.1.8.1.4.1.1.1.3 |
entUpperFatalThreshThe upper fatal threshold for a physical sensor. When a sensor value goes above this threshold, the system will shutdown.rw Integer32 .1.3.6.1.4.1.4115.1.8.1.4.1.1.1.4 |
entThreshConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.4.2 |
entThreshCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.4.2.1 |
entThreshComplianceDescription. Unknown .1.3.6.1.4.1.4115.1.8.1.4.2.1.1 |
entThreshGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.4.2.2 |
entThreshValueGroupDescription. Unknown .1.3.6.1.4.1.4115.1.8.1.4.2.2.1 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.