ARRIS-D5-DVB-PSIG-MIB
The ARRIS-D5-DVB-PSIG-MIB enables SNMP-based monitoring and configuration of the Physical Signal Interface (PSIG) software on Arris D5 DOCSIS 3.0/3.1 cable modems, specifically tracking DVB-C signal parameters such as modulation status, signal-to-noise ratio (SNR), and downstream channel synchronization states.
Imported Objects
Objects
35 total| Object Name |
|---|
d5DvbCasPsigMuxMibThis MIB manages the PSIG interface software on the Arris D5 WAN. MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.9 |
d5DvbCasPsigMuxObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.9.1 |
d5DvbCasPsigTableThis table stores the PSIG interfaces on the MUX(D5) SEQUENCE OF D5DvbCasPsigEntry .1.3.6.1.4.1.4115.1.8.1.9.1.1 |
d5DvbCasPsigEntry D5DvbCasPsigEntry .1.3.6.1.4.1.4115.1.8.1.9.1.1.1 |
d5PsigNameDVB psig name to be used to identify psig locally.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.1 |
d5PsigTcpPortTcp port over which connection with Psig is to be established.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.2 |
d5PsigSrcIpIP source address of Psig.rw IpAddress .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.3 |
d5PsigRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.4 |
d5PsigSessionNumSession-number of this PSIG interfacero Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.5 |
d5PsigNumChannelsThe total number channels configured on this PSIG interfacero Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.6 |
d5PsigNumStreamsThe total number of streams configured on this PSIG interfacero Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.7 |
d5PsigNumSectionsThe total number of sections configured on this PSIG interfacero Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.1.1.8 |
d5DvbCasPsigChannelTableThis table stores status information for PSIG channels that are configured on the PSIG interfaces of the MUX(D5) SEQUENCE OF D5DvbCasPsigChannel .1.3.6.1.4.1.4115.1.8.1.9.1.2 |
d5DvbCasPsigChannel D5DvbCasPsigChannel .1.3.6.1.4.1.4115.1.8.1.9.1.2.1 |
d5PsigChanPsigNameDVB psig name to be used to identify psig locally.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.1 |
d5PsigChanChannelIdChannel identifier reference for the PSIG channel connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.2 |
d5PsigChanNetworkIdNetworkId which is referenced by the PSIG channel connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.3 |
d5PsigChanTsIdTransportStreamId which is referenced by the PSIG channel connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.4 |
d5PsigChanTcpPortTcp port over which PSIG channel connection is established.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.5 |
d5PsigChanNumStreamsThe total number of streams configured on the PSIG channel connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.2.1.6 |
d5DvbCasPsigStreamTableThis table stores status information for PSIG streams that are configured on the PSIG interfaces of the MUX(D5) SEQUENCE OF D5DvbCasPsigStream .1.3.6.1.4.1.4115.1.8.1.9.1.3 |
d5DvbCasPsigStream D5DvbCasPsigStream .1.3.6.1.4.1.4115.1.8.1.9.1.3.1 |
d5PsigStrPsigNameDVB psig name to be used to identify psig locally.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.1 |
d5PsigStrChannelIdChannel identifier reference for the PSIG stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.2 |
d5PsigStrPidPID which is referenced by the PSIG stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.3 |
d5PsigStrStreamIdstream identifier reference for the PSIG stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.4 |
d5PsigStrNetworkIdNetworkId which is referenced by the PSIG stream connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.5 |
d5PsigStrTsIdTransportStreamId which is referenced by the PSIG stream connection.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.6 |
d5PsigStrTcpPortTcp port over which PSIG stream connection is established.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.7 |
d5PsigStrNumSectionsThe total number of sections configured on the PSIG stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.3.1.8 |
d5DvbCasPsigGlobalConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.9.1.4 |
d5DvbCasPsigGlobalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.9.1.4.1 |
d5DvbCasPsigMaxChannelsMaximum number of PSIG channels which can concurrently supported across all interfaces on the MUX(D5).ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.4.1.1 |
d5DvbCasPsigMaxStreamsMaximum number of PSIG streams which can concurrently supported on a single PSIG channel.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.4.1.2 |
d5DvbCasPsigMaxSectionsMaximum number of sections which can concurrently supported on a single PSIG stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.9.1.4.1.3 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.