ARRIS-CM-DEVICE-MIB
AI MIB Summary
The ARRIS-CM-DEVICE-MIB provides proprietary management objects for monitoring and configuring ARRIS Cable Modem hardware, specifically exposing device status, operational parameters, and configuration attributes required for SNMP-based network management.
This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices.
Main OID:
arrisCmDevMib.1.3.6.1.4.1.4115.1.3.1
15
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
arrisCmDevMibThis MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices. MODULE-IDENTITY .1.3.6.1.4.1.4115.1.3.1 |
arrisCmDevMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1 |
arrisCmDevBase OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.1 |
arrisCmDevWanIsolationStateThe object controls the state of WAN Isolation. The meaning of the state is as follows: off-InActiveMode(1) - Data traffic passes freely between the home users network and the outside network (i.e. the Internet). In this mode, the WAN Isolation state is considered 'InActive'. on-ActiveMode(2) - The home users network is isolated from the Internet. Data traffic will not pass between the home user's network and the Internet. In this mode, the WAN Isolation state is considered 'Active'.rw Enumeration .1.3.6.1.4.1.4115.1.3.1.1.1.1 |
arrisCmDevSwImageNameThe name of the software image currently operating on this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.3.1.1.1.2 |
arrisCmDevSwImageBuildTimeThe build date and time of the software image currently operating on this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.3.1.1.1.3 |
arrisCmDevCmSetup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.2 |
arrisCmDevPermanentSetup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.2.2 |
arrisCmDevOperationalSetup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.2.3 |
arrisCmDevProvMethodIndicatorIndicates the method used to provision the device. This object should only be changed by the configuration file. The following provisioning methods are supported: docsisOnly(0) - DOCSIS-only provisioning fullPacketCable(1) - fully PacketCable compliant provisioning packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and SNMPv3 disabled cps(3) - compatible with CPS2000 (SNMPv2; IPSEC disabled) gupi(4) - SNMPv2, with no SNMP Informs and IPSEC disabled singleMAC(5) - single config file (SNMPv2, single IP address, single MAC address, no SNMP Informs, IPSEC disabled)rw ArrsCmDevProvMethod .1.3.6.1.4.1.4115.1.3.1.1.2.3.2 |
arrisCmDevEnableDocsis20This object is used to enable/disable DOCSIS 2.0 operation mode. This object is stored into NVRAM and will be operational after the next reboot of the device. Set to true(1) to enable DOCSIS 2.0 operation mode. Set to false(2) to disable DOCSIS 2.0 operation mode. Setting this object to the same value that is already stored in NVRAM will do nothing. After the successful setting of this object, the device will automatically reboot.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.3.1.1.2.3.3 |
arrisCmDevSalesSetup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.2.4 |
arrisCmDevCmTest OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.3 |
arrisCmDevManufacturingTest OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.3.2 |
arrisCmDevOperationalTest OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.1.1.3.3 |