ARRIS-CER-VIDEO-VPME-MIB
The ARRIS-CER-VPME-MIB module provides SNMP access to configure and monitor encryption parameters for the Arris E6000 Cable Edge Router's Video VPME (Video Payload Management Encryption) subsystem. It exposes specific objects for managing cryptographic keys, session states, and encryption algorithms required to secure video transport streams on the device.
Imported Objects
Objects
55 total| Object Name |
|---|
cerVideoVpmeMIBThis MIB contains objects related to configuring
Arris E6000 CER Video VPME Encryption configuration MODULE-IDENTITY .1.3.6.1.4.1.4115.1.9.1.7 |
cerVideoVpmeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.9.1.7.0 |
cerVideoEqmConnectionThis trap is sent when the EQM connection fails. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.9.1.7.0.1 |
cerVideoVpmeEqmProtocolThis trap is sent when a protocol error on the EQM interface
is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.9.1.7.0.2 |
cerVideoVpmeProgramDeliveryThis trap is sent when the delivery of an encrypted program is
blocked because of a ECM provivioning failure. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.9.1.7.0.3 |
cerVideoVpmePartialConfigThis trap is sent when a VPME instance is partially configured.
The trap is cleared when the VPME instance is correctly configured
(and set administratively UP) or when the configuration is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.9.1.7.0.4 |
cerVideoVpmeSdTableThis table specifies the VPME instance details.
It specifies a collection of encrypted services which are in
the same Security Domain and are therefore share a common CW SEQUENCE OF CerVideoVpmeSdEntry .1.3.6.1.4.1.4115.1.9.1.7.1 |
cerVideoVpmeSdEntryInformation about a single table entry. CerVideoVpmeSdEntry .1.3.6.1.4.1.4115.1.9.1.7.1.1 |
cerVideoVpmeSdIndexThe security-domain instance number uniquely identifies
the VPME instance for the E6000.rw Integer32 .1.3.6.1.4.1.4115.1.9.1.7.1.1.1 |
cerVideoVpmeSdDacIdDACID uniquely identifies the VPME instance for this SCS.
The default value is 0.rw Integer32 .1.3.6.1.4.1.4115.1.9.1.7.1.1.2 |
cerVideoVpmeSdAdminStateSet state of VPME instance for this security-domain.
Setting the state to down will result in all sevices
associated with this instance to be delivered in the clearrw AdminState (CADANT-TC) .1.3.6.1.4.1.4115.1.9.1.7.1.1.3 |
cerVideoVpmeSdRowStatusShow state of VPME instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.9.1.7.1.1.4 |
cerVideoVpmeSdEqmIpAddressIP address of the host of the EQM.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4115.1.9.1.7.1.1.5 |
cerVideoVpmeSdEqmTcpPortTCP port of the EQM.rw Integer32 .1.3.6.1.4.1.4115.1.9.1.7.1.1.6 |
cerVideoVpmeSdSourceInterfaceIpv4IfIndexThe ifIndex of the interface from which all IPv4 packets are sourced.
A value of 0 indicates no source interface override.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.9.1.7.1.1.7 |
cerVideoVpmeSdSourceInterfaceIpv4AddressThe IP address of the interface from which all IPv4 packets are sourced.
A value of 0 indicates no source interface override.rw InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4115.1.9.1.7.1.1.8 |
cerVideoVpmeSdStatsTableThis read-only table is used to monitor the current state of the
VPME instance. Note there is a 1:1 mapping between an VPME instance
and an security domain. SEQUENCE OF CerVideoVpmeSdStatsEntry .1.3.6.1.4.1.4115.1.9.1.7.2 |
cerVideoVpmeSdStatsEntryInformation about a single table entry. CerVideoVpmeSdStatsEntry .1.3.6.1.4.1.4115.1.9.1.7.2.1 |
cerVideoVpmeSdStatsIndexThe security-domain instance number uniquely identifies
the VPME instance for the E6000. INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.1 |
cerVideoVpmeSdStatsEqmWakeupDefines the number of seconds prior to a CW-Provision,
that the EQM connection will be established. The default is 0 which
means that the EQM connection remains permanently established.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.2 |
cerVideoVpmeSdStatsEcmDurationDefines defines the lifetime of the control word and ECM, in seconds.
This value is signaled by the EQM and the E6000 must provision a
new CW after this period of time.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.3 |
cerVideoVpmeSdStatsEcmTimeoutDefines the countdown to the next CW provision event, in seconds.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.4 |
cerVideoVpmeSdStatsEcmRepPeriodDefines the rate at which ECM datagrams must be generated on the
egress video stream for each encrypted service, in milliseconds.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.5 |
cerVideoVpmeSdStatsTimeInOperStateTimestamp when the service became operational.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.9.1.7.2.1.6 |
cerVideoVpmeSdStatsEcmProvSuccCntCount of the total number of successful ECM provision interactions
with the EQMro Counter32 .1.3.6.1.4.1.4115.1.9.1.7.2.1.7 |
cerVideoVpmeSdStatsEcmProvFailCntCount of the total number of failed ECM provision interactions
with the EQM.ro Counter32 .1.3.6.1.4.1.4115.1.9.1.7.2.1.8 |
cerVideoVpmeSdStatsTimeoutCntCount of the total number of EQM response timeouts which have occurred.ro Counter32 .1.3.6.1.4.1.4115.1.9.1.7.2.1.9 |
cerVideoVpmeSdStatsErrorCntCount of the total number of Error messages from the EQM.ro Counter32 .1.3.6.1.4.1.4115.1.9.1.7.2.1.10 |
cerVideoVpmeSdStatsEqmFlapCntCount of the total number of connection failures to the EQM.
This count does not include enable/disable of the VPME instance.ro Counter32 .1.3.6.1.4.1.4115.1.9.1.7.2.1.11 |
cerVideoVpmeSdStatsVpmeOperStateIndicates the operational state of the VPME instance.ro Enumeration .1.3.6.1.4.1.4115.1.9.1.7.2.1.12 |
cerVideoVpmeSdStatsSzIndexThe instance of the streaming zone associated with the VPME instance.
0 is reserved for the unassigned case.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.2.1.13 |
cerVideoVpmeRuleTableThis is a table of configured Service Encryption rules. SEQUENCE OF CerVideoVpmeRuleEntry .1.3.6.1.4.1.4115.1.9.1.7.3 |
cerVideoVpmeRuleEntryInformation about a single table entry. CerVideoVpmeRuleEntry .1.3.6.1.4.1.4115.1.9.1.7.3.1 |
cerVideoVpmeRuleDacIdDACID uniquely identifies the VPME instance to which this
service encryption rule is bound to. INTEGER .1.3.6.1.4.1.4115.1.9.1.7.3.1.1 |
cerVideoVpmeRuleTransportIdTransport ID. A 0 value is interpreted as a wildcard all match. INTEGER .1.3.6.1.4.1.4115.1.9.1.7.3.1.2 |
cerVideoVpmeRuleServiceIdService ID. A 0 value is interpreted as a wildcard all match.rw INTEGER .1.3.6.1.4.1.4115.1.9.1.7.3.1.3 |
cerVideoVpmeRuleExcludeIf this variable is set to TRUE then the service(s) matched by this
rule are excluded from scrambling.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.9.1.7.3.1.4 |
cerVideoVpmeRuleRowStatusThe values that control the creation/deletion of Service Encryption
Rules.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.9.1.7.3.1.5 |
cerVideoVpmeProgTableThis read-only table is used to monitor the current set of
encrypted active services. SEQUENCE OF CerVideoVpmeProgEntry .1.3.6.1.4.1.4115.1.9.1.7.4 |
cerVideoVpmeProgEntryInformation about a single table entry. CerVideoVpmeProgEntry .1.3.6.1.4.1.4115.1.9.1.7.4.1 |
cerVideoVpmeProgDacIdDACID uniquely identifies the VPME instance which is encrypting this servicero INTEGER .1.3.6.1.4.1.4115.1.9.1.7.4.1.1 |
cerVideoVpmeProgQamIfIndexThe ifIndex of the QAM channel associated with this service. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.9.1.7.4.1.2 |
cerVideoVpmeProgServiceIdService ID.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.4.1.3 |
cerVideoVpmeProgTransportIdTransport ID.ro INTEGER .1.3.6.1.4.1.4115.1.9.1.7.4.1.4 |
cerVideoVpmeProgEcmPidIdentifies the PID on which the ECM datagrams for this service are deliveredro CerPID (ARRIS-CER-VIDEO-MIB) .1.3.6.1.4.1.4115.1.9.1.7.4.1.5 |
cerVideoVpmeProgDeliveryStateThe current encryption delivery state of the service.ro CerVideoVpmeProgDeliveryState .1.3.6.1.4.1.4115.1.9.1.7.4.1.6 |
cerVideoVpmeProgDeliveryStateTimeThe timestamp indicating when the service entered the current
delivery state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.9.1.7.4.1.7 |
cerVideoVpmeProgRuleTransportIdThe configured transportID of the encryption rule which this
service is matched against.ro Integer32 .1.3.6.1.4.1.4115.1.9.1.7.4.1.8 |
cerVideoVpmeProgRuleServiceIdThe configured serviceID of the encryption rule which this
service is matched against.ro Integer32 .1.3.6.1.4.1.4115.1.9.1.7.4.1.9 |
cerVideoVpmeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.9.1.7.5 |
cerVideoVpmeEqmSharedSecretShared secret used to secure the EQM/E6000 interface.
The string is limited to a max of 64 ASCII characters.rw OCTET STRING .1.3.6.1.4.1.4115.1.9.1.7.5.1 |
cerVideoVpmeTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.9.1.7.6 |
cerVideoVpmeEqmStatusEQM connection status of E6000.ro AdminState (CADANT-TC) .1.3.6.1.4.1.4115.1.9.1.7.6.1 |
cerVideoVpmeProgStatusDelivery state of a VPME encrypted program.ro AdminState (CADANT-TC) .1.3.6.1.4.1.4115.1.9.1.7.6.2 |
cerVideoVpmeErrorStrDescription of error encountered on the EQM interface.ro DisplayString .1.3.6.1.4.1.4115.1.9.1.7.6.3 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.