ARRIS-C3-SUBINT-MIB
AI MIB Summary
The ARRIS-C3-SUBINT-MIB provides SNMP management for sub-interface software instances on Arris CMTS C3 cable modem termination systems, enabling monitoring of logical interface states, traffic counters, and error statistics for individual DOCSIS sub-interfaces.
This MIB manages the Sub-Interface software on the Arris CMTS C3
Main OID:
cmtsC3SubIntMIB.1.3.6.1.4.1.4115.1.4.3.11
47
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
cmtsC3SubIntMIBThis MIB manages the Sub-Interface software on the Arris CMTS C3 MODULE-IDENTITY .1.3.6.1.4.1.4115.1.4.3.11 |
dcxSubIntObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.11.1 |
dcxSubIntControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.11.1.1 |
dcxSubIntTableArris C3 Proprietary Sub-Interface table SEQUENCE OF DcxSubIntEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.1 |
dcxSubIntEntryA row in the dcxSubIntTable. An entry in this table exists for each Sub-Interface configured on the CMTS DcxSubIntEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1 |
dcxSubIntSlotIndexthe slot index of the card in the Cmts Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.1 |
dcxSubIntPortIndexthe port index of the port on a card Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.2 |
dcxSubIntSubIntIndexthe sub-interface index of the sub-inteface on a port Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.3 |
dcxSubIntBridgeGroupNumbridge-group number which the sub-interface is configured on, 0 is reserved, 255 indicates not configured in a bridge-grouprw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.4 |
dcxSubIntManagementAccessis management of Cmts allowed through sub-interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.5 |
dcxSubIntPrimaryIpAddressprimary ip address of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.6 |
dcxSubIntPrimaryIpMaskprimary ip subnet mask of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.7 |
dcxSubIntPrimaryIpBCastAddressprimary ip subnet broadcast address of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.8 |
dcxSubIntRelayEnabledare DHCP packets relayed on this sub-interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.9 |
dcxSubIntRelayInformationOptionis the information options added to the DHCP packets relayed on this sub-interface. Has no effect if dcxSubIntRelayEnabled is False on the sub-interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.10 |
dcxSubIntGiaddrPolicywhich giaddr is used for DHCP packets relayed from CPEs on this sub-interface, off(0) is returned when dcxSubIntRelayEnabled is False, primary(1) indicates that the primary address on sub-interface is used, policy(2) indicates that the first secondary is used.rw Enumeration .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.11 |
dcxSubIntInboundAclIndexwhich Access Control List is this sub-interface bound to for inbound packets, a value of zero indicates no ACL binding for inbound packets on the sub-interfacerw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.12 |
dcxSubIntOutgoingAclIndexwhich Access Control List is this sub-interface bound to for outgoing packets, a value of zero indicates no ACL binding for inbound packets on the sub-interfacerw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.13 |
dcxSubIntUnboundTagsub-interface encapsulate Vlan Tag value, 0 indicates no tagrw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.14 |
dcxSubIntUnboundTagIsNativesub-interface will not generate packets with tags when native is configuredrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.15 |
dcxSubIntOperationalstates if the subinterface is operational or not, factors are dcxSubIntStatus and the physical ports oper and admin statusro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.16 |
dcxSubIntStatusControls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no restriction on changing values in a row of this table while the row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.1.1.17 |
dcxSubIntIpTableArris C3 Proprietary Sub-Interface table SEQUENCE OF DcxSubIntIpEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.2 |
dcxSubIntIpEntryA row in the dcxSubIntIpTable. An entry in this table exists for each IP address configured on the Sub-Interface identified by the dcxSubIntNumber DcxSubIntIpEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1 |
dcxSubIntIpIndexsub-interface secondary IP address index Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.1 |
dcxSubIntIpAddressa secondary ip address of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.2 |
dcxSubIntIpMaska secondary ip subnet mask of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.3 |
dcxSubIntIpBCastAddressa secondary ip subnet broadcast address of sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.4 |
dcxSubIntIpAddressTypeprimary(1): address is the primary address on the sub-interface, only one allowed secondary(2):address is one of the secondary addresses configured on the sub-interfacerw Enumeration .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.5 |
dcxSubIntIpStatusControls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.2.1.6 |
dcxSubIntCableHelperTableArris C3 Proprietary Sub-Interface Cable Helper Table SEQUENCE OF DcxSubIntCableHelperEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.3 |
dcxSubIntCableHelperEntryA row in the dcxSubIntCableHelperTable. An entry in this table exists for each cable helper IP address configured on the Sub-Interface which is identified using the dcxSubIntNumber DcxSubIntCableHelperEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1 |
dcxSubIntCableHelperTypecategory of cable helper address. cm(1) these helper addresses are only used when relaying DHCP packets originating from a CM. cpe(2) these helper addresses are only used when relaying DHCP packets originating from a CPE. default(0) these helper addresses are used when: - relaying DHCP packets originating from a CM when no helper address of type cm(1) is configured or - relaying DHCP packets originating from a CPE when no helper address of type cpe(2) is configured Enumeration .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.1 |
dcxSubIntCableHelperIndexsub-interface cable helper index Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.2 |
dcxSubIntCableHelperIpAddresscable helper ip address configured on sub-interfacerw IpAddress .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.3 |
dcxSubIntCableHelperStatusControls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. Entries in this table can only be created or deleted, no modification is possible.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.3.1.4 |
dcxSubIntVlanTagTableArris C3 Proprietary Sub-Interface Vlan Tag Table SEQUENCE OF DcxSubIntVlanTagEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.4 |
dcxSubIntVlanTagEntryA row in the dcxSubIntVlanTagTable. An entry in this table exists for each Vlan tag that is configured on the sub-interface (which is identified using the dcxSubIntNumber) DcxSubIntVlanTagEntry .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1 |
dcxSubIntVlanTagsub-interface Vlan Tag value, 0 indicates no tag Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.1 |
dcxSubIntVlanNativesub-interface will not generate packets with tags when native is configuredrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.2 |
dcxSubIntVlanIsBoundis sub-interface tag bound to another sub-interface's VLAN tagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.3 |
dcxSubIntBoundVlanSlotIndexslot index of VLAN tag that dcxSubIntVlanTag is bound to -1 when VLAN not bound to another VLAN tag on another sub-interfacerw Integer32(-1..4094) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.4 |
dcxSubIntBoundVlanPortIndexport index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interfacerw Integer32(-1..4094) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.5 |
dcxSubIntBoundVlanSubIntIndexsub interface index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interfacerw Integer32(-1..4094) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.6 |
dcxSubIntBoundVlanTagsub-interface Vlan Tag value, 0 indicates no tagrw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.7 |
dcxSubIntBoundVlanNativebound sub-interface will not generate packets with tags when native is configured FLASE will be returned when VLAN not bound to another VLAN tag on another sub-interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.8 |
dcxSubIntVlanTagStatusControls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.4.3.11.1.1.4.1.9 |